main
Ray Publish 0.1.0 d28b984

ETA5055V280DD1E

etasolution · Linear Voltage Regulators (LDO) · DFN1x1-4

ETA5055V280DD1E from etasolution, in a DFN1x1-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output of regulator pin, which supplies the regulated output voltage with a maximum continuous output current of 500mA.
2 GND power_in Ground pin for the regulator.
3 EN input Enable pin: drive it high to enable the IC and low to disable it, with logic low at most 0.4V and logic high at least 0.9V for 1.8V ≤ VIN ≤ 5.5V.
4 IN power_in Input supply pin with an input voltage range of 1.8V to 5.5V and an absolute maximum rating of -0.3V to 6V.
5 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer etasolution
Package DFN1x1-4
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 1.8 5.5 V 2
Quiescent Current IQ 4.5 µA IOUT=0mA, VEN=VIN 2
Quiescent Current IQ 10 µA IOUT=0mA, Dropout 2
Shutdown Current 1 µA VEN = 0V, 1.8V ≤ VIN ≤ 5.5V 2
Dropout Voltage VDROPOUT 130 mV IOUT =200mA, VOUT=2.8V 2
Continuous Output Current IOUT 500 mA 2
Output Current Limit ILIM 540 800 mA VOUT = 95% 2
Output Foldback Current Limit 400 mA VOUT = 0V 2
Line Regulation 0.2 %/V VOUT + 1V ≤ VIN ≤ 5.5V 2
Load Regulation 15 mV 1mA ≤ IOUT ≤ 200 mA 2
Output Voltage Range VOUT 1.1 3.6 V Available in 100mV steps 2
Output Voltage Accuracy VOUT -2 2 % IOUT =30mA, VOUT>1.8V 2
EN pin input Logic Low VIL 0.4 V 1.8V ≤ VIN ≤ 5.5V 2
EN pin input Logic High VIH 0.9 V 1.8V ≤ VIN ≤ 5.5V 2
Start-up Time 100 µs 2
Power Supply Rejection Ratio PSRR 96 dB Freq = 100Hz, IOUT = 20mA 2
Power Supply Rejection Ratio PSRR 94 dB Freq = 1KHz, IOUT = 20mA 2
Discharge Resistance 90 Ω VIN=2.8V, VEN=0V 2
Thermal Shutdown 140 °C Rising, IOUT>1mA, Hysteresis =40°C 2
Thermal Shutdown 135 °C Rising, IOUT=0mA, Hysteresis =40° C 2
IN, EN, OUT Voltage VIN/VEN/VOUT -0.3 6 V 2
Operating Temperature Range TA -40 85 °C 2
Storage Temperature Range TSTG -55 150 °C 2

CAD (KiCad official)

  • Symbol: ETA5055V280DD1E
  • Footprint: Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm
  • 3D model: DFN1x1-4 (KiCad packages3D, STEP)
  • 3D model files: eta5055v280dd1e-etched.step / eta5055v280dd1e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eta5055v280dd1e.step / eta5055v280dd1e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: etasolution datasheet (13 pp, sha256 94f9672339c6c0d2, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF