← Commit history

Set visibility: public

Ray ·beaf712035 · ·parent c963134
1 file changed +8−5
page.json+8−5
@@ -38,25 +38,25 @@         "number": "2",         "name": "SW",         "type": "output",-        "description": "Switching node. Connect the external power inductor between SW and the regulator output. Internally driven by the high-side and low-side power MOSFETs (RDS(on) ~37m\u03a9 HS / ~25m\u03a9 LS)."+        "description": "Switching node. Connect the external power inductor between SW and the regulator output. Internally driven by the high-side and low-side power MOSFETs (RDS(on) ~37mΩ HS / ~25mΩ LS)."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",-        "description": "Supply input, 2.5V to 5.5V. Bypass with a 22\u00b5F ceramic capacitor to GND placed close to the pin. Absolute maximum 7V."+        "description": "Supply input, 2.5V to 5.5V. Bypass with a 22µF ceramic capacitor to GND placed close to the pin. Absolute maximum 7V."       },       {         "number": "4",         "name": "EN",         "type": "input",-        "description": "Enable input. Drive high (rising threshold typ 1.2V, falling 0.4V) to enable the converter; drive low to shut down (IQ <1\u00b5A). For automatic start-up, tie EN to VIN through a pull-up resistor. Absolute maximum 7V."+        "description": "Enable input. Drive high (rising threshold typ 1.2V, falling 0.4V) to enable the converter; drive low to shut down (IQ <1µA). For automatic start-up, tie EN to VIN through a pull-up resistor. Absolute maximum 7V."       },       {         "number": "5",         "name": "FB",         "type": "input",-        "description": "Feedback input to the internal error comparator. Connect an external resistor divider from VOUT to FB and GND to set the output voltage: VOUT = 0.6V \u00d7 (1 + R1/R2). Internal reference 0.6V (\u00b11%); R2 should be 1k\u03a9-70k\u03a9."+        "description": "Feedback input to the internal error comparator. Connect an external resistor divider from VOUT to FB and GND to set the output voltage: VOUT = 0.6V × (1 + R1/R2). Internal reference 0.6V (±1%); R2 should be 1kΩ-70kΩ."       },       {         "number": "6",@@ -126,5 +126,8 @@     "docs/eta3458fsg-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file