Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ETA2893E8A

etasolution · DC-DC Converters · ESOP-8

ETA2893E8A from etasolution, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input: connect an external resistor divider from the output to FB and GND to set VOUT, with VFB typically 1V.
2 VCC power_in Power supply pin for the internal circuit, to be bypassed with a 1uF capacitor; internal VCC is 5 to 6V with a 30mA current limit.
3 FOSC input Frequency setting pin: a resistor from this pin to GND sets the switching frequency per FSW = 28000/ROSC kHz (ROSC in kΩ) across 130kHz to 1.1MHz.
4 GND power_in Ground pin.
5 SW output Inductor connection: connect the inductor between SW and the regulator output.
6 IN power_in Input power pin, operating from 3.6V to 40V; bypass to GND with a minimum 10uF X7R or X5R capacitor.
7 BST passive Bootstrap pin: connect a 10nF capacitor from this pin to SW.
8 EN input Enable pin: drive high or leave floating to enable, low to disable; it has an accurate threshold for setting UVLO externally.
9 GND passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer etasolution
Package ESOP-8
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 3.6 40 V 2
Switching Frequency Range 130 1100 KHz 2
FB_ Voltage VFB 0.985 1 1.015 V 2
VCC Internal Voltage VCC 5 5.5 6 V 2
IN, SW, EN Voltage -0.3 45 V 2
BST Voltage -0.3 V 2
FB,FOSC,VCC Voltage -0.3 6.5 V 2
Operating Temperature Range TA -40 85 °C 2
Storage Temperature Range TSTG -55 150 °C 2
Input UVLO Rising 3.9 V Rising 2
Input UVLO Falling 3.6 V 2
Input OVP Rising 40 V 2
Input OVP Falling 37.5 V 2
Input Supply Current IQ 9 µA VFB=1.1V, no switching 2
Input Shutdown Current 1.2 µA 2
VCC Current Limit 30 mA 2
FB_ Input Current 0 µA 2
Switching Frequency Ff Ff 130 KHz ROSC open 2
Switching Frequency 456 KHz ROSC=62K 2
Switching Frequency Fs Fs 1.1 MHz ROSC =0 2
Maximum Duty Cycle 99 % FSW=500KHz, CBST=10nF, VIN=4.9V, Voutset=5V 2
Short Circuit Hiccup On Time 2.5 mS FSW=500KHz 2
Short Circuit Hiccup Off Time 6.5 mS FSW=500KHz 2
FB_ Hiccup Falling Threshold 42 %VFB 2
FB_ Hiccup Rising 46 %VFB 3
FB_ OVP Rising 113 %VFB 3
FB_ OVP Falling 111 %VFB 3
Load Step 5 %/A VIN = 12V, VOUT = 5V, COUT=44uF, IOUT=0.1A to 3A 3
High Side Switch On Resistance RDS(ON) 131 mΩ 3
Low Side Switch On Resistance RDS(ON) 84 mΩ 3
High Side Current Limit 6.5 A 3
High Side Current Limit During Foldback 2.1 A During Foldback 3
Low Side Zero Crossing Current 100 mA 3
SW Leakage Current ISW 0 µA VIN=VSW=12V 3
FOSC Voltage 1 V 3
EN Rising Threshold 1 V Rising 3
EN Falling Threshold 0.9 V Falling 3
EN Pull Up Current 0.25 uA VEN=0V 3
Thermal Shutdown 160 °C Rising 3
Thermal Shutdown Hys 40 °C 3
Thermal Resistance junction-to-case θJC 10 °C/W ESOP8 2

CAD (KiCad official)

  • Symbol: ETA2893E8A
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: eta2893e8a-etched.step / eta2893e8a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eta2893e8a.step / eta2893e8a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: etasolution datasheet (8 pp, sha256 bc03ee729a5792db, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF