component
ETA2821S2G
Public Made by Adomby adom
etasolution DC-DC Converters, SOT23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
84fcfcb
ETA2821S2G
etasolution · DC-DC Converters · SOT23-6
ETA2821S2G from etasolution, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | passive | Bootstrap pin; connect a 10nF capacitor from this pin to SW. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | FB | input | Feedback input; connect an external resistor divider from the output to FB and GND to set VOUT, with the FB threshold at 0.8V. |
| 4 | EN | input | Enable pin; drive high to enable the part and low to disable it, with EN input low voltage specified at 0.8V to 1.4V. |
| 5 | IN | power_in | Supply voltage input; bypass with a 10μF ceramic capacitor to GND, with an input voltage range of 4V to 38V. |
| 6 | SW | output | Inductor connection; connect an inductor between SW and the regulator output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | SOT23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| IN Voltage | -0.3 | 42 | V | 2 | |||
| SW, EN Voltage | -0.3 | V | upper limit printed as VIN+0.3V | 2 | |||
| BST Voltage | -0.3 | V | upper limit printed as SW+6V | 2 | |||
| FB Voltage | -0.3 | 6 | V | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Storage Temperature Range | -55 | 150 | °C | 2 | |||
| Input Voltage Range | 4 | 38 | V | 2 | |||
| EN Input Current | 1 | 5 | μA | VIN=12V ,VEN =5V | 2 | ||
| EN Input Low Voltage | 0.8 | 1.1 | 1.4 | V | Rising, Hysteresis=100mV | 2 | |
| Input Standoff Voltage | 42 | V | 2 | ||||
| Input UVLO | 3.8 | V | Rising, Hysteresis=140mV | 2 | |||
| Input OVP | 38 | V | Rising, Hysteresis=1.3V | 2 | |||
| Input Supply Current | 0.6 | mA | VFB =0.85V | 2 | |||
| Input Shutdown Current | 6 | μA | 2 | ||||
| FB Feedback Voltage | 0.8 | V | 2 | ||||
| FB Input Current | 0.01 | μA | 2 | ||||
| Switching Frequency | 650 | KHz | 2 | ||||
| Maximum Duty Cycle | 90 | % | 2 | ||||
| FoldBack Frequency | 60 | KHz | VFB = 0V | 2 | |||
| High side Switch On Resistance | 300 | mΩ | ISW =200mA | 2 | |||
| High side Switch Current Limit | 2.5 | A | 2 | ||||
| SW Leakage Current | 10 | μA | VIN=12V,VSW=0, EN= GND | 2 | |||
| Thermal Shutdown | 150 | °C | Hysteresis=40°C | 2 | |||
| Thermal Resistance Junction-to-Case | θJC | 110 | oC/W | SOT23-6 package | 2 |
CAD (KiCad official)
- Symbol:
ETA2821S2G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files:
eta2821s2g-etched.step/eta2821s2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eta2821s2g.step/eta2821s2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: etasolution datasheet (7 pp, sha256
ee3f6a7e037a8795, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ETA2821S2G
**etasolution** · DC-DC Converters · SOT23-6
ETA2821S2G from etasolution, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | passive | Bootstrap pin; connect a 10nF capacitor from this pin to SW. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | FB | input | Feedback input; connect an external resistor divider from the output to FB and GND to set VOUT, with the FB threshold at 0.8V. |
| 4 | EN | input | Enable pin; drive high to enable the part and low to disable it, with EN input low voltage specified at 0.8V to 1.4V. |
| 5 | IN | power_in | Supply voltage input; bypass with a 10μF ceramic capacitor to GND, with an input voltage range of 4V to 38V. |
| 6 | SW | output | Inductor connection; connect an inductor between SW and the regulator output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | SOT23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| IN Voltage | | -0.3 | | 42 | V | | 2 |
| SW, EN Voltage | | -0.3 | | | V | upper limit printed as VIN+0.3V | 2 |
| BST Voltage | | -0.3 | | | V | upper limit printed as SW+6V | 2 |
| FB Voltage | | -0.3 | | 6 | V | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | | 2 |
| Storage Temperature Range | | -55 | | 150 | °C | | 2 |
| Input Voltage Range | | 4 | | 38 | V | | 2 |
| EN Input Current | | | 1 | 5 | μA | VIN=12V ,VEN =5V | 2 |
| EN Input Low Voltage | | 0.8 | 1.1 | 1.4 | V | Rising, Hysteresis=100mV | 2 |
| Input Standoff Voltage | | | 42 | | V | | 2 |
| Input UVLO | | | 3.8 | | V | Rising, Hysteresis=140mV | 2 |
| Input OVP | | | 38 | | V | Rising, Hysteresis=1.3V | 2 |
| Input Supply Current | | | 0.6 | | mA | VFB =0.85V | 2 |
| Input Shutdown Current | | | 6 | | μA | | 2 |
| FB Feedback Voltage | | | 0.8 | | V | | 2 |
| FB Input Current | | | 0.01 | | μA | | 2 |
| Switching Frequency | | | 650 | | KHz | | 2 |
| Maximum Duty Cycle | | | 90 | | % | | 2 |
| FoldBack Frequency | | | 60 | | KHz | VFB = 0V | 2 |
| High side Switch On Resistance | | | 300 | | mΩ | ISW =200mA | 2 |
| High side Switch Current Limit | | | 2.5 | | A | | 2 |
| SW Leakage Current | | | 10 | | μA | VIN=12V,VSW=0, EN= GND | 2 |
| Thermal Shutdown | | | 150 | | °C | Hysteresis=40°C | 2 |
| Thermal Resistance Junction-to-Case | θJC | | 110 | | oC/W | SOT23-6 package | 2 |
## CAD (KiCad official)
- Symbol: `ETA2821S2G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files: `eta2821s2g-etched.step` / `eta2821s2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `eta2821s2g.step` / `eta2821s2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [etasolution datasheet](docs/eta2821s2g-datasheet.pdf) (7 pp, sha256 `ee3f6a7e037a8795`, retrieved 2026-11-04, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/eta2821s2g-datasheet.pdf)