component
ETA1061V33S2G
Public Made by Adomby adom
etasolution LED Drivers, SOT23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownETA1061V33S2G
etasolution · LED Drivers · SOT23-6
ETA1061V33S2G from etasolution, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Output pin; bypass with a 4.7μF or larger ceramic capacitor placed closely between this pin and GND. Fixed 3.3V version output is 3.2V to 3.4V per the electrical characteristics. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin for the IC; drive high to enable the part and low to disable it (EN high minimum 0.75V, EN low maximum 0.25V, referenced to VOUT=5V in the datasheet). |
| 4 | IN | power_in | Input supply voltage; bypass with a 4.7μF ceramic capacitor to GND. Operating range after start-up is 0.55V to 5V, with 0.75V typical startup voltage. |
| 5 | NC | unconnected | Not connected on the fixed voltage version; there is no FB pin on this variant and the pin is left unconnected. |
| 6 | SW | output | Inductor connection; connect an inductor between SW and the regulator output. Absolute maximum rating for SW voltage is -0.3V to 6.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | SOT23-6 |
| Category | LED Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage at 3.3V | 3.2 | 3.3 | 3.4 | V | 2 | ||
| IN Operation Voltage After Start-up | 0.55 | 5 | V | 2 | |||
| Quiescent Current at OUT, fixed voltage version | 1.2 | 2.5 | μA | VEN=VIN, No load, Not switching | 2 | ||
| Quiescent Current at IN, fixed 3.3V version | 15 | 30 | uA | VEN=VIN=3.6V | 2 | ||
| EN Input Current | -1 | 0 | 1 | μA | VEN=5V or 0V | 2 | |
| IN, OUT, SW, FB, EN Voltage | -0.3 | 6.5 | V | Voltage on IN, OUT, SW, FB, EN pins | 2 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Storage Temperature Range | -55 | 150 | °C | 2 | |||
| ESD HBM (Human Body Mode) | 2 | KV | Human Body Model | 2 | |||
| ESD CDM (Charged Device Mode) | 1 | KV | Charged Device Model | 2 | |||
| Thermal Resistance junction-to-case, SOT23-6 | θJC | 90 | C/W | SOT23-6 package | 2 |
CAD (KiCad official)
- Symbol:
ETA1061V33S2G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files:
eta1061v33s2g-etched.step/eta1061v33s2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eta1061v33s2g.step/eta1061v33s2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: etasolution datasheet (9 pp, sha256
545da2de21831131, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).