ET6226M

{
 "schema": "adom.pads/1",
 "slug": "et6226m",
 "footprint": "SOIC-16_3.9x9.9mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -4.445
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GR1",
   "type": "output",
   "description": "Grid 1 (bit) LED low-side drive output; also used as keyboard scanning output for column/grid 1. Bit drive current is at least 150 mA.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "CLK",
   "type": "input",
   "description": "Serial clock input for the two-wire bus interface. Internal pull-up resistor. Data on DAT is sampled while CLK is high; DAT transitions occur while CLK is low.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "DAT",
   "type": "bidirectional",
   "description": "Serial data input/output for the two-wire bus interface. Open-drain style output (built-in drain-mode pull-on). Carries command, display data, and returned key codes.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference pin (0 V) for the device.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "GR2",
   "type": "output",
   "description": "Grid 2 (bit) LED low-side drive output; also used as keyboard scanning output. Bit drive current is at least 150 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "GR3",
   "type": "output",
   "description": "Grid 3 (bit) LED low-side drive output; also used as keyboard scanning output. Bit drive current is at least 150 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "GR4",
   "type": "output",
   "description": "Grid 4 (bit) LED low-side drive output; also used as keyboard scanning output. Bit drive current is at least 150 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "SG1/KS1",
   "type": "bidirectional",
   "description": "Segment 1 LED high-side drive output (>=25 mA); also used as key-scan input row 1 during keyboard scanning, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "SG2/KS2",
   "type": "bidirectional",
   "description": "Segment 2 LED high-side drive output (>=25 mA); also used as key-scan input row 2, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply pin. Operating range 3.0 V to 5.5 V. Absolute maximum -0.5 V to 6.5 V; max supply current ICC = 150 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "SG3/KS3",
   "type": "bidirectional",
   "description": "Segment 3 LED high-side drive output (>=25 mA); also used as key-scan input row 3, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "SG4/KS4",
   "type": "bidirectional",
   "description": "Segment 4 LED high-side drive output (>=25 mA); also used as key-scan input row 4, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "SG5/KS5",
   "type": "bidirectional",
   "description": "Segment 5 LED high-side drive output (>=25 mA); also used as key-scan input row 5, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "SG6/KS6",
   "type": "bidirectional",
   "description": "Segment 6 LED high-side drive output (>=25 mA); also used as key-scan input row 6, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "SG7/KS7",
   "type": "bidirectional",
   "description": "Segment 7 LED high-side drive output (>=25 mA); also used as key-scan input row 7, active-high with internal pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "DP/KP",
   "type": "output",
   "description": "Segment/Bit output - LED segment drive output (typically the decimal point in 7-segment mode) or the 8th segment in 8-segment mode; also serves as keyboard-symbol output. Function depends on the 7-segment vs 8-segment mode selection register bit.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}