main
Ray
Publish 0.1.3
30e6ee8
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476
{
"slug": "esp8684-mini-1-h4",
"version": "0.1.3",
"type": "component",
"description": "Espressif Systems RF and Wireless. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"rf and wireless",
"esp8684-mini-1-h4",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"esp8684-mini-1-h4.kicad_sym",
"esp8684-mini-1-h4.kicad_mod",
"esp8684-mini-1-h4.glb",
"esp8684-mini-1-h4.step",
"esp8684-mini-1-h4.lbr",
"docs/hero.png",
"docs/esp8684-mini-1-h4-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "ESP8684-MINI-1-H4",
"land_source": "datasheet",
"land_note": "Espressif ESP8684-MINI-1 & MINI-1U datasheet v1.1 (sha 489a2301), p.34 Figure 11 'ESP8684-MINI-1 Recommended PCB Land Pattern' (top view, 13.2 x 16.6 body, Antenna Area across the full width): 61 pads = the 53 numbered pins (p.10 Figure 3 / 'The module has 53 pins': 1-48 edge pads 0.4 x 0.8 at 0.8 pitch, corner GND pins 50-53 0.7 x 0.7, centre pin 49) + 8 more 1.45 x 1.45 GND pads making the 3 x 3 centre array (5.4 span, 0.6 gaps). The 64-pad reading over-counted. Measured from a 600 dpi render scaled by the printed 12.6 x 10.6 pad extents (99.7 px/mm both axes): all 51 unobstructed pads match Espressif's ESP32-C3-MINI-1 KiCad footprint (PCM_Espressif) within 0.02 mm in position and size; the 10 others are crossed by dimension lines. That footprint carries the 'antenna keepout' zone (no tracks/vias/pads/pour/footprints) over the antenna area, as Figure 11 shows. Espressif's kicad-libraries has no ESP8684-MINI-1 footprint (only WROOM-02C/02UC).",
"manufacturer": "Espressif Systems",
"package": "ESP32-C3-MINI-1",
"pin_count": 53,
"category": "RF and Wireless",
"subcategory": "RF and Wireless",
"datasheet": "https://documentation.espressif.com/esp8684-mini-1_mini-1u_datasheet_en.pdf",
"parts": {
"symbol": "esp8684-mini-1-h4.kicad_sym",
"footprint": "esp8684-mini-1-h4.kicad_mod",
"model_3d": "esp8684-mini-1-h4-etched.glb",
"model_3d_plain": "esp8684-mini-1-h4.glb",
"model_3d_step": "esp8684-mini-1-h4-etched.step",
"model_3d_step_plain": "esp8684-mini-1-h4.step",
"lbr": "esp8684-mini-1-h4.lbr"
},
"distributor_links": {
"digikey": "1965-ESP8684-MINI-1-H4CT-ND",
"mouser": "356-ESP8684MINI1H4"
},
"distributor_check": {
"checked_at": "2026-11-18T00:44:38Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "1965-ESP8684-MINI-1-H4CT-ND",
"status": "found"
},
"mouser": {
"pn": "356-ESP8684MINI1H4",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "3",
"name": "3V3",
"type": "power_in",
"description": "Power supply pin; the datasheet gives an operating voltage of 3.0 to 3.6 V with a 3.3 V typical value."
},
{
"number": "4",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "5",
"name": "IO2",
"type": "bidirectional",
"description": "GPIO2 with ADC1_CH2 and FSPIQ functions; I/O/T pin."
},
{
"number": "6",
"name": "IO3",
"type": "bidirectional",
"description": "GPIO3 with ADC1_CH3 function; the datasheet notes a low-level glitch during chip power-up."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "8",
"name": "EN",
"type": "input",
"description": "Chip enable: high turns the chip on, low turns it off; do not leave this pin floating."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "12",
"name": "IO0",
"type": "bidirectional",
"description": "GPIO0 with ADC1_CH0 function; the datasheet notes a low-level glitch during chip power-up."
},
{
"number": "13",
"name": "IO1",
"type": "bidirectional",
"description": "GPIO1 with ADC1_CH1 function; the datasheet notes a low-level glitch during chip power-up."
},
{
"number": "14",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "16",
"name": "IO10",
"type": "bidirectional",
"description": "GPIO10 with FSPICS0 function; I/O/T pin."
},
{
"number": "17",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "18",
"name": "IO4",
"type": "bidirectional",
"description": "GPIO4 with ADC1_CH4, FSPIHD and MTMS functions; I/O/T pin."
},
{
"number": "19",
"name": "IO5",
"type": "bidirectional",
"description": "GPIO5 with FSPIWP and MTDI functions; the datasheet notes a low-level glitch during chip power-up."
},
{
"number": "20",
"name": "IO6",
"type": "bidirectional",
"description": "GPIO6 with FSPICLK and MTCK functions; I/O/T pin."
},
{
"number": "21",
"name": "IO7",
"type": "bidirectional",
"description": "GPIO7 with FSPID and MTDO functions; I/O/T pin."
},
{
"number": "22",
"name": "IO8",
"type": "bidirectional",
"description": "GPIO8; it is a strapping pin for chip boot mode and ROM message printing control."
},
{
"number": "23",
"name": "IO9",
"type": "bidirectional",
"description": "GPIO9; it is a strapping pin for chip boot mode, with an internal weak pull-up by default."
},
{
"number": "24",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "25",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "26",
"name": "IO18",
"type": "bidirectional",
"description": "GPIO18; I/O/T pin."
},
{
"number": "27",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "28",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "29",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "30",
"name": "RXD0",
"type": "bidirectional",
"description": "GPIO19 with U0RXD function, used as the UART0 receive pin for firmware download and debug."
},
{
"number": "31",
"name": "TXD0",
"type": "bidirectional",
"description": "GPIO20 with U0TXD function, used as the UART0 transmit pin for firmware download and debug."
},
{
"number": "32",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "33",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "34",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "35",
"name": "NC",
"type": "unconnected",
"description": "Not connected; leave this pin unconnected."
},
{
"number": "36",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "37",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "38",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "39",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "40",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "41",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "42",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "43",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "44",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "45",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "46",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "47",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "48",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "49",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module; the schematic labels this pad as EPAD."
},
{
"number": "50",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "51",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "52",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
},
{
"number": "53",
"name": "GND",
"type": "power_in",
"description": "Ground pin of the module."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"no package hint was available; multi-package datasheets are a coin flip without one",
"extractor flagged: The MPN ESP8684-MINI-1-H4 is the H4 ordering code. The datasheet lists it as ESP8684-MINI-1-H4X (4 M; Pin 49 is listed as GND in Table 3, but the module schematic labels it EPAD. It is kept as GND here,"
],
"pages_sent": 28,
"cost_usd": 0.0797,
"at": "2026-11-18T00:45:21"
},
"datasheet": {
"url": "https://documentation.espressif.com/esp8684-mini-1_mini-1u_datasheet_en.pdf",
"pages": 40,
"sha256": "489a23018cbf0303",
"source_tier": "mfr",
"citation": "Espressif Systems datasheet"
},
"cad": "land: Espressif KiCad libraries (CC-BY-SA 4.0); 3D: Espressif's ESP32-C3-MINI-1 model, used because the ESP8684-MINI-1 datasheet gives identical outline dimensions (p.3 Table 1, p.31 Fig 8) on the same land",
"pins": {
"total": 53,
"described": 53,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "esp8684-mini-1-h4.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
13.2,
16.6,
2.399
],
"zmin_mm": 0.0,
"centre_offset_mm": 2.7,
"footprint_binding": "identity",
"sha256": "2a722a27e0a464be28b3df6b9dcf8cdb208139c762be3e6b1b9e59ac6231d9c9",
"checked": "2026-11-18",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)",
"moved": {
"dx_mm": -0.0,
"dy_mm": 0.07,
"pads_matched": "51/61",
"method": "the model's own underside pad faces matched to the footprint's pads (espressif_lib.align_to_pads)"
}
},
{
"file": "esp8684-mini-1-h4-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
13.2,
16.6,
2.399
],
"zmin_mm": 0.0,
"centre_offset_mm": 2.7,
"footprint_binding": "identity",
"sha256": "293d783417939c32fb1408da7c019399eb80c6f0035d86892e4eac8b3d7e006d",
"checked": "2026-11-18",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)",
"moved": {
"dx_mm": -0.0,
"dy_mm": 0.07,
"pads_matched": "51/61",
"method": "the model's own underside pad faces matched to the footprint's pads (espressif_lib.align_to_pads)"
}
}
]
}
}