3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownESP8684-DevKitC-02
Espressif Systems · development board · ESP8684-WROOM-02C · orderable as ESP8684-DevKitC-02C-N4X
This page carries the board as a part, so a carrier board or a breakout molecule can place it: the header pinout as a symbol, the header pattern as a footprint, and a 3D model of the board standing on its headers.
Footprint
J1 (15 pins) and J3 (15 pins) at 2.54 mm, from Espressif's dimension drawing. The footprint origin is the centre of the header pattern; F.Fab draws the board (25.40 x 38.91 mm) and the module. The module's antenna runs 5.71 mm past the board edge; the footprint keeps copper out from under that overhang.
Pinout
As printed in Espressif's user guide (v1.0). Pin 1 of each header is at the module end.
J1
| No. | Name | Function |
|---|---|---|
| 1 | G | Ground |
| 2 | 3V3 | 3.3 V power supply |
| 3 | 3V3 | 3.3 V power supply |
| 4 | RST | Reset; High: enable; Low: powers off; Pull up by default |
| 5 | G | Ground |
| 6 | 4 | GPIO4, ADC1_CH4, FSPIHD, MTMS |
| 7 | 5 | GPIO5, FSPIWP, MTDI |
| 8 | 6 | GPIO6, FSPICLK, MTCK |
| 9 | 7 | GPIO7, FSPID , MTDO |
| 10 | G | Ground |
| 11 | 8 | GPIO8, LED Blue |
| 12 | 9 | GPIO9 |
| 13 | 5V | 5 V power supply |
| 14 | 5V | 5 V power supply |
| 15 | G | Ground |
J3
| No. | Name | Function |
|---|---|---|
| 1 | G | Ground |
| 2 | 0 | GPIO0, ADC1_CH0, LED Red |
| 3 | 1 | GPIO1, ADC1_CH1, LED Green |
| 4 | 2 | GPIO2, ADC1_CH2, FSPIQ |
| 5 | 3 | GPIO3, ADC1_CH3 |
| 6 | G | Ground |
| 7 | 10 | GPIO10, FSPICS0 |
| 8 | G | Ground |
| 9 | RX | GPIO19, U0RXD |
| 10 | TX | GPIO20, U0TXD |
| 11 | G | Ground |
| 12 | 18 | GPIO18 |
| 13 | NC | -- |
| 14 | G | Ground |
| 15 | G | Ground |
3D model
Rebuilt from Espressif's own manufacturing data: the PCB layout plots (esp8684-devkitc-02-pcb-layout_V1.0.pdf) give every part, its pads (by the plot's own pad designators) and the silkscreen as Espressif drew them; the board edge comes from the plot itself (Espressif's dimension DXF for this kit is silkscreen artwork with no board outline). Drills are the holes the plot draws. The module is Espressif's ESP8684-WROOM-02C model (espressif/kicad-libraries) with its name etched; every other part is a KiCad library model fitted to its pads in the plot (worst fit 0.08 mm), each listed below with where its model came from. J2: Micro-B jack with no maker datasheet, generated from the USB Micro-B receptacle interface and the jack height in Espressif's BOM (S3-DevKitC-1 reference design, USB_5P_MICRO_F_ML), on this board's own land. D6 is adom/rs-3535mwar (NationStar RS-3535MWAR), matched to Espressif's '3535RGB' by its pinout and its land (exact); its model is drawn from the same NationStar spec as that page's. The headers are mounted below the board, pins down, as the kit ships. Solder mask black and silkscreen white, from Espressif's user-guide photo. Two-pad parts are fitted by their land: where a diode and an LED share a land, the land cannot tell which, and the passive values are not read from the schematic.
Documents
- User guide (Espressif, web)
- Module datasheet (ESP8684-WROOM-02C, v1.4): docs/esp8684-devkitc-02-module-esp8684-wroom-02c-datasheet.pdf, from Espressif
- Schematic: docs/esp8684-devkitc-02-schematic.pdf, from Espressif
- Dimensions: docs/esp8684-devkitc-02-dimensions.pdf, from Espressif
Modules: schematic: ESP8684-WROOM-02C.
Schematic (Espressif)
Dimensions (Espressif)
Parts on the board
| Ref | Part | Page | 3D model |
|---|---|---|---|
| C1 | (none) | KiCad library model, fitted to its plotted pads | |
| C2 | (none) | KiCad library model, fitted to its plotted pads | |
| C6 | (none) | KiCad library model, fitted to its plotted pads | |
| C7 | (none) | KiCad library model, fitted to its plotted pads | |
| C8 | (none) | KiCad library model, fitted to its plotted pads | |
| C9 | (none) | KiCad library model, fitted to its plotted pads | |
| C10 | (none) | KiCad library model, fitted to its plotted pads | |
| C11 | (none) | KiCad library model, fitted to its plotted pads | |
| C12 | (none) | KiCad library model, fitted to its plotted pads | |
| C13 | (none) | KiCad library model, fitted to its plotted pads | |
| C14 | (none) | KiCad library model, fitted to its plotted pads | |
| C15 | (none) | KiCad library model, fitted to its plotted pads | |
| D1 | (none) | KiCad library model, fitted to its plotted pads | |
| D2 | (none) | KiCad library model, fitted to its plotted pads | |
| D3 | (none) | KiCad library model, fitted to its plotted pads | |
| D4 | (none) | KiCad library model, fitted to its plotted pads | |
| D5 | (none) | KiCad library model, fitted to its plotted pads | |
| D6 | adom/rs-3535mwar | NationStar RS-3535MWAR (LCSC C110402), the adom/rs-3535mwar page: matched to Espressif's '3535RGB' by its pinout and its land (exact); model generated from the same drawn spec as that page's (led_gen rgb_SMD3535-6P_nationstar, NationStar spec C2 p.6) | |
| J1 | (none) | KiCad library model, fitted to its plotted pads | |
| J2 | (none) | generated: USB Micro-B receptacle interface + Espressif BOM jack height (S3-DevKitC-1 reference design item 16, USB_5P_MICRO_F_ML), on this board's own land | |
| J3 | (none) | KiCad library model, fitted to its plotted pads | |
| Q1 | (none) | KiCad library model, fitted to its plotted pads | |
| Q2 | (none) | KiCad library model, fitted to its plotted pads | |
| R1 | (none) | KiCad library model, fitted to its plotted pads | |
| R4 | (none) | KiCad library model, fitted to its plotted pads | |
| R5 | (none) | KiCad library model, fitted to its plotted pads | |
| R10 | (none) | KiCad library model, fitted to its plotted pads | |
| R11 | (none) | KiCad library model, fitted to its plotted pads | |
| R12 | (none) | KiCad library model, fitted to its plotted pads | |
| R14 | (none) | KiCad library model, fitted to its plotted pads | |
| R16 | (none) | KiCad library model, fitted to its plotted pads | |
| R18 | (none) | KiCad library model, fitted to its plotted pads | |
| R19 | (none) | KiCad library model, fitted to its plotted pads | |
| R20 | (none) | KiCad library model, fitted to its plotted pads | |
| R21 | (none) | KiCad library model, fitted to its plotted pads | |
| R22 | (none) | KiCad library model, fitted to its plotted pads | |
| R23 | (none) | KiCad library model, fitted to its plotted pads | |
| R24 | (none) | KiCad library model, fitted to its plotted pads | |
| R25 | (none) | KiCad library model, fitted to its plotted pads | |
| SW1 | (none) | KiCad library model, fitted to its plotted pads | |
| SW2 | (none) | KiCad library model, fitted to its plotted pads | |
| U2 | (none) | KiCad library model, fitted to its plotted pads | |
| U3 | (none) | KiCad library model, fitted to its plotted pads | |
| U4 | (none) | Espressif's ESP8684-WROOM-02C model (espressif/kicad-libraries), name etched |