Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ESP32-WROVER-E

Espressif Systems · RF and Wireless · 38-SMD Module

ESP32-WROVER-E from Espressif Systems, in a 38-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 3V3 power_in Module power supply; recommended VDD33 is 3.0 V min, 3.3 V typ, 3.6 V max.
3 EN input Module-enable signal, active high.
4 SENSOR_VP input GPIO36, ADC1_CH0, RTC_GPIO0.
5 SENSOR_VN input GPIO39, ADC1_CH3, RTC_GPIO3.
6 IO34 input GPIO34, ADC1_CH6, RTC_GPIO4.
7 IO35 input GPIO35, ADC1_CH7, RTC_GPIO5.
8 IO32 bidirectional GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9.
9 IO33 bidirectional GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8.
10 IO25 bidirectional GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0.
11 IO26 bidirectional GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1.
12 IO27 bidirectional GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV.
13 IO14 bidirectional GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2.
14 IO12 bidirectional GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3; strapping pin that selects the VDD_SDIO voltage and should be kept low at power-on.
15 GND power_in Ground.
16 IO13 bidirectional GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER.
17 NC unconnected No connection; GPIO6 to GPIO11 are connected to the on-module SPI flash and are not led out.
18 NC unconnected No connection; GPIO6 to GPIO11 are connected to the on-module SPI flash and are not led out.
19 NC unconnected No connection; GPIO6 to GPIO11 are connected to the on-module SPI flash and are not led out.
20 NC unconnected No connection; GPIO6 to GPIO11 are connected to the on-module SPI flash and are not led out.
21 NC unconnected No connection; GPIO6 to GPIO11 are connected to the on-module SPI flash and are not led out.
22 NC unconnected No connection; GPIO6 to GPIO11 are connected to the on-module SPI flash and are not led out.
23 IO15 bidirectional GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3.
24 IO2 bidirectional GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0; strapping pin with default pull-down.
25 IO0 bidirectional GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK; strapping pin with default pull-up.
26 IO4 bidirectional GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER.
27 NC unconnected No connection.
28 NC unconnected No connection.
29 IO5 bidirectional GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK; strapping pin with default pull-up.
30 IO18 bidirectional GPIO18, VSPICLK, HS1_DATA7.
31 IO19 bidirectional GPIO19, VSPIQ, U0CTS, EMAC_TXD0.
32 NC unconnected No connection.
33 IO21 bidirectional GPIO21, VSPIHD, EMAC_TX_EN.
34 RXD0 bidirectional GPIO3, U0RXD, CLK_OUT2.
35 TXD0 bidirectional GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2.
36 IO22 bidirectional GPIO22, VSPIWP, U0RTS, EMAC_TXD1.
37 IO23 bidirectional GPIO23, VSPID, HS1_STROBE.
38 GND power_in Ground.
39 GND power_in Thermal ground pad (EPAD, P_GND) on the module underside; soldering it to the base-board ground is optional but optimizes thermal performance.

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package 38-SMD Module
Category RF and Wireless
Pins 39

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VDD33 -0.3 3.6 V 28
Storage temperature Tstore -40 105 °C 28
Power supply voltage VDD33 3 3.3 3.6 V 28
Current delivered by external power supply IV DD 0.5 A 28
Operating temperature T -40 85 °C 28
High-level input current IIH 50 nA 28
Low-level input current IIL 50 nA 28
Low-level input voltage VIL -0.3 V 28
Low-level input voltage of CHIP_PU to shut down the chip VIL_nRST 0.6 V 29
Power supply voltage (1.8 V) VCC 1.65 1.8 2 V 30
Power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V 30
Maximum clock frequency FC 80 MHz 30
Program/erase cycles 100000 cycles 30
Data retention time TRET 20 years 30
Page program time TPP 0.8 5 ms 30
Sector erase time (4 KB) TSE 70 500 ms 30
Block erase time (32 KB) TBE1 0.2 2 s 30
Block erase time (64 KB) TBE2 0.3 3 s 30
Chip erase time (16 Mb) TCE 7 20 s 30
Chip erase time (32 Mb) TCE 20 60 s 30
Chip erase time (64 Mb) TCE 25 100 s 30
Chip erase time (128 Mb) TCE 60 200 s 30
Chip erase time (256 Mb) TCE 70 300 s 30
Power supply voltage (1.8 V) VCC 1.62 1.8 1.98 V 31
Power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V 31
Maximum clock frequency FC 80 MHz 31
Differential nonlinearity DNL -7 7 LSB RTC controller; ADC connected to an external 100 nF capacitor; DC signal input; ambient temperature at 25 °C; Wi-Fi&Bluetooth off 27
Integral nonlinearity INL -12 12 LSB RTC controller; ADC connected to an external 100 nF capacitor; DC signal input; ambient temperature at 25 °C; Wi-Fi&Bluetooth off 27
Total error -23 23 mV Atten = 0, effective measurement range of 100 ∼ 950 mV 27
Total error -30 30 mV Atten = 1, effective measurement range of 100 ∼ 1250 mV 27
Total error -40 40 mV Atten = 2, effective measurement range of 150 ∼ 1750 mV 27
Total error -60 60 mV Atten = 3, effective measurement range of 150 ∼ 2450 mV 27

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Solder, Sn-Ag-Cu (SAC305) lead-free solder alloy Figure 16: Reflow Profile 47

CAD (land: Espressif; 3D: Espressif Systems)

  • Symbol: ESP32-WROVER-E
  • Footprint: PCM_Espressif:ESP32-WROVER-E
  • 3D model: 38-SMD Module (Espressif KiCad libraries, STEP)
  • 3D model files: esp32-wrover-e-m213eh3264ph3q0-etched.step / esp32-wrover-e-m213eh3264ph3q0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-wrover-e-m213eh3264ph3q0.step / esp32-wrover-e-m213eh3264ph3q0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (53 pp, sha256 611e8506f352225e, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.

Datasheet PDF