← Commit history

Initial commit: component/esp32-s3r8

Ray ·70313b79f9 ·
2 files changed +530
README.mdadded+93
@@ -0,0 +1,93 @@+# ESP32-S3R8++**Espressif Systems** · RF Transceiver ICs · QFN-56(7x7)++ESP32-S3R8 from Espressif Systems, in a QFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LNA_IN | bidirectional | Low-noise amplifier input/output for 2.4 GHz RF signals, receives and transmits RF with impedance-controlled interface for antenna routing |+| 2 | VDD3P3 | power_in | Analog power domain supply input, recommended voltage 3.0 to 3.6 V |+| 3 | VDD3P3 | power_in | Analog power domain supply input, recommended voltage 3.0 to 3.6 V |+| 4 | CHIP_PU | input | Chip power-up enable input: high level enables chip operation, low level powers down chip; must not be left floating |+| 5 | GPIO0 | bidirectional | General-purpose digital I/O pin with RTC_GPIO0 and SAR I2C functions, internal weak pull-up enabled at reset, strapping pin for SPI boot mode |+| 6 | GPIO1 | bidirectional | General-purpose digital I/O pin with RTC_GPIO1, TOUCH1, and ADC1_CH0 analog functions, input enabled at reset |+| 7 | GPIO2 | bidirectional | General-purpose digital I/O pin with RTC_GPIO2, TOUCH2, and ADC1_CH1 analog functions, input enabled at reset |+| 8 | GPIO3 | bidirectional | General-purpose digital I/O pin with RTC_GPIO3, TOUCH3, and ADC1_CH2 analog functions; strapping pin for JTAG signal source selection, input enabled at reset |+| 9 | GPIO4 | bidirectional | General-purpose digital I/O pin with RTC_GPIO4, TOUCH4, and ADC1_CH3 analog functions |+| 10 | GPIO5 | bidirectional | General-purpose digital I/O pin with RTC_GPIO5, TOUCH5, and ADC1_CH4 analog functions |+| 11 | GPIO6 | bidirectional | General-purpose digital I/O pin with RTC_GPIO6, TOUCH6, and ADC1_CH5 analog functions |+| 12 | GPIO7 | bidirectional | General-purpose digital I/O pin with RTC_GPIO7, TOUCH7, and ADC1_CH6 analog functions |+| 13 | GPIO8 | bidirectional | General-purpose digital I/O pin with RTC_GPIO8, TOUCH8, and ADC1_CH7 analog functions; can be routed as SUBSPI CS1 output |+| 14 | GPIO9 | bidirectional | General-purpose digital I/O pin with RTC_GPIO9, TOUCH9, and ADC1_CH8 analog functions; can be routed as SUBSPI HD or FSPI HD, input enabled at reset |+| 15 | GPIO10 | bidirectional | General-purpose digital I/O pin with RTC_GPIO10, TOUCH10, and ADC1_CH9 analog functions; can be routed as FSPI IO4 or SUBSPI CS0, input enabled at reset |+| 16 | GPIO11 | bidirectional | General-purpose digital I/O pin with RTC_GPIO11, TOUCH11, and ADC2_CH0 analog functions; can be routed as FSPI IO5 or SUBSPI D, input enabled at reset |+| 17 | GPIO12 | bidirectional | General-purpose digital I/O pin with RTC_GPIO12, TOUCH12, and ADC2_CH1 analog functions; can be routed as FSPI IO6 or SUBSPI CLK, input enabled at reset |+| 18 | GPIO13 | bidirectional | General-purpose digital I/O pin with RTC_GPIO13, TOUCH13, and ADC2_CH2 analog functions; can be routed as FSPI IO7 or SUBSPI Q, input enabled at reset |+| 19 | GPIO14 | bidirectional | General-purpose digital I/O pin with RTC_GPIO14, TOUCH14, and ADC2_CH3 analog functions; can be routed as FSPI DQS or SUBSPI WP, input enabled at reset |+| 20 | VDD3P3_RTC | power_in | RTC and digital power domain supply input, recommended voltage 3.0 to 3.6 V, powers RTC module and GPIO27-GPIO14 |+| 21 | XTAL_32K_P | passive | External 32 kHz crystal oscillator positive terminal for RTC slow clock; RTC_GPIO15 and ADC2_CH4 analog function available |+| 22 | XTAL_32K_N | passive | External 32 kHz crystal oscillator negative terminal for RTC slow clock; RTC_GPIO16 and ADC2_CH5 analog function available |+| 23 | GPIO17 | bidirectional | General-purpose digital I/O pin with RTC_GPIO17 and ADC2_CH6 analog functions, input enabled at reset |+| 24 | GPIO18 | bidirectional | General-purpose digital I/O pin with RTC_GPIO18 and ADC2_CH7 analog functions; can output CLK_OUT3, input enabled at reset, exhibits 60 µs low-level glitch at power-up |+| 25 | GPIO19 | bidirectional | General-purpose digital I/O pin with RTC_GPIO19, USB_D- and ADC2_CH8 analog functions; can output CLK_OUT2, exhibits two 60 µs high-level glitches (3.2 ms total) at power-up |+| 26 | GPIO20 | bidirectional | General-purpose digital I/O pin with RTC_GPIO20, USB_D+ and ADC2_CH9 analog functions; internal weak pull-up enabled by default for USB Serial/JTAG; can output CLK_OUT1; exhibits 60 µs pull-down and high-level glitches (2 ms total) at power-up |+| 27 | GPIO21 | bidirectional | General-purpose digital I/O pin with RTC_GPIO21 function |+| 28 | SPICS1 | bidirectional | SPI chip select 1 output for in-package PSRAM; GPIO26 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 29 | VDD_SPI | power_in | In-package memory and SPI flash/PSRAM supply input/output (backup power line), voltage 1.8 to 3.6 V depending on variant and configuration |+| 30 | SPIHD | bidirectional | SPI hold signal for flash/PSRAM in quad and octal SPI modes; GPIO27 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 31 | SPIWP | bidirectional | SPI write protect signal for flash/PSRAM in quad and octal SPI modes; GPIO28 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 32 | SPICS0 | bidirectional | SPI chip select 0 output for in-package flash; GPIO29 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 33 | SPICLK | bidirectional | SPI clock output for flash/PSRAM in SPI modes; GPIO30 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 34 | SPIQ | bidirectional | SPI Q data line (SO/SIO1) for flash/PSRAM in quad and octal SPI modes; GPIO31 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 35 | SPID | bidirectional | SPI D data line (SI/SIO0) for flash/PSRAM in quad and octal SPI modes; GPIO32 routing via GPIO matrix available; internal weak pull-up enabled at reset |+| 36 | SPICLK_N | tri_state | Differential SPI clock negative for 8-line octal SPI mode (DQ3); GPIO48 routing via GPIO matrix available; powered by VDD_SPI or VDD3P3_CPU; input enabled at reset |+| 37 | SPICLK_P | tri_state | Differential SPI clock positive for 8-line octal SPI mode (DQ2); GPIO47 routing via GPIO matrix available; powered by VDD_SPI or VDD3P3_CPU; input enabled at reset |+| 38 | GPIO33 | bidirectional | General-purpose digital I/O pin; SPI data line DQ4 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI HD or SUBSPI HD, input enabled at reset |+| 39 | GPIO34 | bidirectional | General-purpose digital I/O pin; SPI data line DQ5 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI CS0 or SUBSPI CS0, input enabled at reset |+| 40 | GPIO35 | bidirectional | General-purpose digital I/O pin; SPI data line DQ6 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI D or SUBSPI D, input enabled at reset |+| 41 | GPIO36 | bidirectional | General-purpose digital I/O pin; SPI data line DQ7 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI CLK or SUBSPI CLK, input enabled at reset |+| 42 | GPIO37 | bidirectional | General-purpose digital I/O pin; SPI DQS/DM line in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI Q or SUBSPI Q, input enabled at reset |+| 43 | GPIO38 | bidirectional | General-purpose digital I/O pin; optional external USB PHY interface pin; powered by VDD3P3_CPU; can route FSPI WP or SUBSPI WP, input enabled at reset |+| 44 | MTCK | input | JTAG test clock input; GPIO39 routing via GPIO matrix available; powered by VDD3P3_CPU; input configuration subject to EFUSE_DIS_PAD_JTAG bit |+| 45 | MTDO | tri_state | JTAG test data output in tri-state; GPIO40 routing via GPIO matrix available; powered by VDD3P3_CPU; input enabled at reset |+| 46 | VDD3P3_CPU | power_in | Digital power domain supply input, recommended voltage 3.0 to 3.3 V (do not exceed 3.3 V when writing eFuses) |+| 47 | MTDI | input | JTAG test data input; GPIO41 routing via GPIO matrix available; powered by VDD3P3_CPU; input configuration subject to EFUSE_DIS_PAD_JTAG bit |+| 48 | MTMS | input | JTAG test mode select input; GPIO42 routing via GPIO matrix available; powered by VDD3P3_CPU; input configuration subject to EFUSE_DIS_PAD_JTAG bit |+| 49 | U0TXD | output | UART0 transmit data output; GPIO43 routing via GPIO matrix available; powered by VDD3P3_CPU; internal weak pull-up enabled at reset |+| 50 | U0RXD | input | UART0 receive data input; GPIO44 routing via GPIO matrix available; powered by VDD3P3_CPU; internal weak pull-up enabled at reset |+| 51 | GPIO45 | bidirectional | General-purpose digital I/O pin; strapping pin for VDD_SPI voltage control (0 = 3.3 V, 1 = 1.8 V when EFUSE_VDD_SPI_FORCE = 0); powered by VDD3P3_CPU; internal weak pull-down enabled at reset |+| 52 | GPIO46 | bidirectional | General-purpose digital I/O pin; strapping pin for chip boot mode control and ROM messages printing; powered by VDD3P3_CPU; internal weak pull-down enabled at reset |+| 53 | XTAL_N | passive | External main crystal oscillator negative terminal for main system clock input/output, required for chip operation |+| 54 | XTAL_P | passive | External main crystal oscillator positive terminal for main system clock input/output, required for chip operation |+| 55 | VDDA | power_in | Analog power domain supply input, recommended voltage 3.0 to 3.6 V |+| 56 | VDDA | power_in | Analog power domain supply input, recommended voltage 3.0 to 3.6 V |+| 57 | GND | power_in | Ground connection; external ground reference for the chip and power return path |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Espressif Systems |+| Package | QFN-56(7x7) |+| Category | RF And Wireless |+| Pins | 57 |++## CAD (KiCad official)++- Symbol: `ESP32-S3R8`+- Footprint: `Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm`+- 3D model: QFN-56(7x7) (KiCad packages3D, STEP)+- 3D model files: `esp32-s3r8-etched.step` / `esp32-s3r8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esp32-s3r8.step` / `esp32-s3r8.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Espressif Systems datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039588447309824) (75 pp, sha256 `049b83bbf484ebe9`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/esp32-s3r8-datasheet.pdf)
page.jsonadded+437
@@ -0,0 +1,437 @@+{+  "slug": "esp32-s3r8",+  "version": "0.1.0",+  "type": "component",+  "description": "Espressif Systems RF Transceiver ICs, QFN-56(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "esp32-s3r8",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "esp32-s3r8.kicad_sym",+    "esp32-s3r8.kicad_mod",+    "esp32-s3r8.glb",+    "esp32-s3r8.step",+    "esp32-s3r8.lbr",+    "docs/hero.png",+    "docs/esp32-s3r8-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ESP32-S3R8",+    "manufacturer": "Espressif Systems",+    "package": "QFN-56(7x7)",+    "pin_count": 57,+    "category": "RF And Wireless",+    "subcategory": "RF Transceiver ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039588447309824",+    "parts": {+      "symbol": "esp32-s3r8.kicad_sym",+      "footprint": "esp32-s3r8.kicad_mod",+      "model_3d": "esp32-s3r8-etched.glb",+      "model_3d_plain": "esp32-s3r8.glb",+      "model_3d_step": "esp32-s3r8-etched.step",+      "model_3d_step_plain": "esp32-s3r8.step",+      "lbr": "esp32-s3r8.lbr"+    },+    "distributor_links": {+      "lcsc": "C2913194"+    },+    "pins": [+      {+        "number": "1",+        "name": "LNA_IN",+        "type": "bidirectional",+        "description": "Low-noise amplifier input/output for 2.4 GHz RF signals, receives and transmits RF with impedance-controlled interface for antenna routing"+      },+      {+        "number": "2",+        "name": "VDD3P3",+        "type": "power_in",+        "description": "Analog power domain supply input, recommended voltage 3.0 to 3.6 V"+      },+      {+        "number": "3",+        "name": "VDD3P3",+        "type": "power_in",+        "description": "Analog power domain supply input, recommended voltage 3.0 to 3.6 V"+      },+      {+        "number": "4",+        "name": "CHIP_PU",+        "type": "input",+        "description": "Chip power-up enable input: high level enables chip operation, low level powers down chip; must not be left floating"+      },+      {+        "number": "5",+        "name": "GPIO0",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO0 and SAR I2C functions, internal weak pull-up enabled at reset, strapping pin for SPI boot mode"+      },+      {+        "number": "6",+        "name": "GPIO1",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO1, TOUCH1, and ADC1_CH0 analog functions, input enabled at reset"+      },+      {+        "number": "7",+        "name": "GPIO2",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO2, TOUCH2, and ADC1_CH1 analog functions, input enabled at reset"+      },+      {+        "number": "8",+        "name": "GPIO3",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO3, TOUCH3, and ADC1_CH2 analog functions; strapping pin for JTAG signal source selection, input enabled at reset"+      },+      {+        "number": "9",+        "name": "GPIO4",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO4, TOUCH4, and ADC1_CH3 analog functions"+      },+      {+        "number": "10",+        "name": "GPIO5",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO5, TOUCH5, and ADC1_CH4 analog functions"+      },+      {+        "number": "11",+        "name": "GPIO6",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO6, TOUCH6, and ADC1_CH5 analog functions"+      },+      {+        "number": "12",+        "name": "GPIO7",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO7, TOUCH7, and ADC1_CH6 analog functions"+      },+      {+        "number": "13",+        "name": "GPIO8",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO8, TOUCH8, and ADC1_CH7 analog functions; can be routed as SUBSPI CS1 output"+      },+      {+        "number": "14",+        "name": "GPIO9",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO9, TOUCH9, and ADC1_CH8 analog functions; can be routed as SUBSPI HD or FSPI HD, input enabled at reset"+      },+      {+        "number": "15",+        "name": "GPIO10",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO10, TOUCH10, and ADC1_CH9 analog functions; can be routed as FSPI IO4 or SUBSPI CS0, input enabled at reset"+      },+      {+        "number": "16",+        "name": "GPIO11",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO11, TOUCH11, and ADC2_CH0 analog functions; can be routed as FSPI IO5 or SUBSPI D, input enabled at reset"+      },+      {+        "number": "17",+        "name": "GPIO12",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO12, TOUCH12, and ADC2_CH1 analog functions; can be routed as FSPI IO6 or SUBSPI CLK, input enabled at reset"+      },+      {+        "number": "18",+        "name": "GPIO13",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO13, TOUCH13, and ADC2_CH2 analog functions; can be routed as FSPI IO7 or SUBSPI Q, input enabled at reset"+      },+      {+        "number": "19",+        "name": "GPIO14",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO14, TOUCH14, and ADC2_CH3 analog functions; can be routed as FSPI DQS or SUBSPI WP, input enabled at reset"+      },+      {+        "number": "20",+        "name": "VDD3P3_RTC",+        "type": "power_in",+        "description": "RTC and digital power domain supply input, recommended voltage 3.0 to 3.6 V, powers RTC module and GPIO27-GPIO14"+      },+      {+        "number": "21",+        "name": "XTAL_32K_P",+        "type": "passive",+        "description": "External 32 kHz crystal oscillator positive terminal for RTC slow clock; RTC_GPIO15 and ADC2_CH4 analog function available"+      },+      {+        "number": "22",+        "name": "XTAL_32K_N",+        "type": "passive",+        "description": "External 32 kHz crystal oscillator negative terminal for RTC slow clock; RTC_GPIO16 and ADC2_CH5 analog function available"+      },+      {+        "number": "23",+        "name": "GPIO17",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO17 and ADC2_CH6 analog functions, input enabled at reset"+      },+      {+        "number": "24",+        "name": "GPIO18",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO18 and ADC2_CH7 analog functions; can output CLK_OUT3, input enabled at reset, exhibits 60 µs low-level glitch at power-up"+      },+      {+        "number": "25",+        "name": "GPIO19",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO19, USB_D- and ADC2_CH8 analog functions; can output CLK_OUT2, exhibits two 60 µs high-level glitches (3.2 ms total) at power-up"+      },+      {+        "number": "26",+        "name": "GPIO20",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO20, USB_D+ and ADC2_CH9 analog functions; internal weak pull-up enabled by default for USB Serial/JTAG; can output CLK_OUT1; exhibits 60 µs pull-down and high-level glitches (2 ms total) at power-up"+      },+      {+        "number": "27",+        "name": "GPIO21",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin with RTC_GPIO21 function"+      },+      {+        "number": "28",+        "name": "SPICS1",+        "type": "bidirectional",+        "description": "SPI chip select 1 output for in-package PSRAM; GPIO26 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "29",+        "name": "VDD_SPI",+        "type": "power_in",+        "description": "In-package memory and SPI flash/PSRAM supply input/output (backup power line), voltage 1.8 to 3.6 V depending on variant and configuration"+      },+      {+        "number": "30",+        "name": "SPIHD",+        "type": "bidirectional",+        "description": "SPI hold signal for flash/PSRAM in quad and octal SPI modes; GPIO27 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "31",+        "name": "SPIWP",+        "type": "bidirectional",+        "description": "SPI write protect signal for flash/PSRAM in quad and octal SPI modes; GPIO28 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "32",+        "name": "SPICS0",+        "type": "bidirectional",+        "description": "SPI chip select 0 output for in-package flash; GPIO29 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "33",+        "name": "SPICLK",+        "type": "bidirectional",+        "description": "SPI clock output for flash/PSRAM in SPI modes; GPIO30 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "34",+        "name": "SPIQ",+        "type": "bidirectional",+        "description": "SPI Q data line (SO/SIO1) for flash/PSRAM in quad and octal SPI modes; GPIO31 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "35",+        "name": "SPID",+        "type": "bidirectional",+        "description": "SPI D data line (SI/SIO0) for flash/PSRAM in quad and octal SPI modes; GPIO32 routing via GPIO matrix available; internal weak pull-up enabled at reset"+      },+      {+        "number": "36",+        "name": "SPICLK_N",+        "type": "tri_state",+        "description": "Differential SPI clock negative for 8-line octal SPI mode (DQ3); GPIO48 routing via GPIO matrix available; powered by VDD_SPI or VDD3P3_CPU; input enabled at reset"+      },+      {+        "number": "37",+        "name": "SPICLK_P",+        "type": "tri_state",+        "description": "Differential SPI clock positive for 8-line octal SPI mode (DQ2); GPIO47 routing via GPIO matrix available; powered by VDD_SPI or VDD3P3_CPU; input enabled at reset"+      },+      {+        "number": "38",+        "name": "GPIO33",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; SPI data line DQ4 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI HD or SUBSPI HD, input enabled at reset"+      },+      {+        "number": "39",+        "name": "GPIO34",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; SPI data line DQ5 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI CS0 or SUBSPI CS0, input enabled at reset"+      },+      {+        "number": "40",+        "name": "GPIO35",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; SPI data line DQ6 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI D or SUBSPI D, input enabled at reset"+      },+      {+        "number": "41",+        "name": "GPIO36",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; SPI data line DQ7 in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI CLK or SUBSPI CLK, input enabled at reset"+      },+      {+        "number": "42",+        "name": "GPIO37",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; SPI DQS/DM line in 8-line octal SPI mode; powered by VDD_SPI or VDD3P3_CPU; can route FSPI Q or SUBSPI Q, input enabled at reset"+      },+      {+        "number": "43",+        "name": "GPIO38",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; optional external USB PHY interface pin; powered by VDD3P3_CPU; can route FSPI WP or SUBSPI WP, input enabled at reset"+      },+      {+        "number": "44",+        "name": "MTCK",+        "type": "input",+        "description": "JTAG test clock input; GPIO39 routing via GPIO matrix available; powered by VDD3P3_CPU; input configuration subject to EFUSE_DIS_PAD_JTAG bit"+      },+      {+        "number": "45",+        "name": "MTDO",+        "type": "tri_state",+        "description": "JTAG test data output in tri-state; GPIO40 routing via GPIO matrix available; powered by VDD3P3_CPU; input enabled at reset"+      },+      {+        "number": "46",+        "name": "VDD3P3_CPU",+        "type": "power_in",+        "description": "Digital power domain supply input, recommended voltage 3.0 to 3.3 V (do not exceed 3.3 V when writing eFuses)"+      },+      {+        "number": "47",+        "name": "MTDI",+        "type": "input",+        "description": "JTAG test data input; GPIO41 routing via GPIO matrix available; powered by VDD3P3_CPU; input configuration subject to EFUSE_DIS_PAD_JTAG bit"+      },+      {+        "number": "48",+        "name": "MTMS",+        "type": "input",+        "description": "JTAG test mode select input; GPIO42 routing via GPIO matrix available; powered by VDD3P3_CPU; input configuration subject to EFUSE_DIS_PAD_JTAG bit"+      },+      {+        "number": "49",+        "name": "U0TXD",+        "type": "output",+        "description": "UART0 transmit data output; GPIO43 routing via GPIO matrix available; powered by VDD3P3_CPU; internal weak pull-up enabled at reset"+      },+      {+        "number": "50",+        "name": "U0RXD",+        "type": "input",+        "description": "UART0 receive data input; GPIO44 routing via GPIO matrix available; powered by VDD3P3_CPU; internal weak pull-up enabled at reset"+      },+      {+        "number": "51",+        "name": "GPIO45",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; strapping pin for VDD_SPI voltage control (0 = 3.3 V, 1 = 1.8 V when EFUSE_VDD_SPI_FORCE = 0); powered by VDD3P3_CPU; internal weak pull-down enabled at reset"+      },+      {+        "number": "52",+        "name": "GPIO46",+        "type": "bidirectional",+        "description": "General-purpose digital I/O pin; strapping pin for chip boot mode control and ROM messages printing; powered by VDD3P3_CPU; internal weak pull-down enabled at reset"+      },+      {+        "number": "53",+        "name": "XTAL_N",+        "type": "passive",+        "description": "External main crystal oscillator negative terminal for main system clock input/output, required for chip operation"+      },+      {+        "number": "54",+        "name": "XTAL_P",+        "type": "passive",+        "description": "External main crystal oscillator positive terminal for main system clock input/output, required for chip operation"+      },+      {+        "number": "55",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power domain supply input, recommended voltage 3.0 to 3.6 V"+      },+      {+        "number": "56",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power domain supply input, recommended voltage 3.0 to 3.6 V"+      },+      {+        "number": "57",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; external ground reference for the chip and power return path"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: ESP32-S3R8 is a variant with 8 MB Octal SPI PSRAM and no in-package flash; pinout is identical to ot; Pins 36-37 (SPICLK_N, SPICLK_P) are powered by VDD_SPI or VDD3P3_CPU depending on EFUSE_PIN_POWER_SE; Pin 29 (VDD_SPI) direction (input/output) is configurable via software; typically functions as backu"+        ],+        "pages_sent": 75,+        "cost_usd": 0.8276,+        "at": "2026-09-22T09:31:53"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039588447309824",+        "pages": 75,+        "sha256": "049b83bbf484ebe9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 57,+        "described": 57,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file