main
Ray
esp32-s31nrv16: CAD wording names Espressif's KiCad libraries, not KiCad official
08a6259
ESP32-S31NRV16
Espressif Systems · RF and Wireless · QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm
ESP32-S31NRV16 from Espressif Systems, in a QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT | bidirectional | RF input and output pin for the antenna. |
| 2 | VDDA3 | power_in | Analog power domain supply input. |
| 3 | VDDA4 | power_in | Analog power domain supply input. |
| 4 | CHIP_PU | input | Chip enable pin: high level enables the chip and low level disables it, and it must not be left floating. |
| 5 | XTAL_32K_N/GPIO0 | bidirectional | Negative terminal for an external 32 kHz crystal or clock, also usable as GPIO0 with IO MUX and LP IO MUX functions, powered by VDDPST_1. |
| 6 | XTAL_32K_P/GPIO1 | bidirectional | Positive terminal for an external 32 kHz crystal or clock, also usable as GPIO1 with IO MUX and LP IO MUX functions, powered by VDDPST_1. |
| 7 | GPIO2 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and LCD_DATA19 output via F4. |
| 8 | GPIO3 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and LCD_DATA20 output via F4. |
| 9 | GPIO4 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and dedicated DAC channel 0 output. |
| 10 | GPIO5 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and dedicated DAC channel 1 output. |
| 11 | VDDPST_1 | power_in | Digital LP power domain supply input that powers the LP IO pins. |
| 12 | GPIO6 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH0 and LP IO MUX functions. |
| 13 | GPIO7 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH1 and LP IO MUX functions. |
| 14 | GPIO8 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH2, input enabled at reset. |
| 15 | GPIO9 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH3, input enabled at reset. |
| 16 | GPIO10 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH4, input enabled at reset. |
| 17 | GPIO11 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH5, input enabled at reset. |
| 18 | VREF_TOUCH | bidirectional | TOUCH reference voltage pin. |
| 19 | GPIO12 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH6, input enabled at reset. |
| 20 | GPIO13 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH7, input enabled at reset. |
| 21 | GPIO14 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH8, input enabled at reset. |
| 22 | GPIO15 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH9, input enabled at reset. |
| 23 | GPIO16 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH10, input enabled at reset. |
| 24 | GPIO17 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH11, input enabled at reset. |
| 25 | GPIO18 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH12, input enabled at reset. |
| 26 | GPIO19 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH13, input enabled at reset. |
| 27 | SDIO_DATA0 | bidirectional | SDIO data line 0 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 28 | SDIO_DATA1 | bidirectional | SDIO data line 1 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 29 | SDIO_DATA2 | bidirectional | SDIO data line 2 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 30 | VDD_PSRAM_1P8_1 | power_in | 1.8 V supply input for the PSRAM domain. |
| 31 | SDIO_DATA3 | bidirectional | SDIO data line 3 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 32 | SDIO_CLK | bidirectional | Clock of SDIO card one, powered by the internal VDDPST_SD domain. |
| 33 | SDIO_CMD | bidirectional | Command line of SDIO card one, powered by the internal VDDPST_SD domain. |
| 34 | VDD_PSRAM_1P8_2 | power_in | 1.8 V supply input for the PSRAM domain. |
| 35 | VDD_LDO_1P8 | power_out | 1.8 V regulator output that supplies the PSRAM, FLASH and SD IO domains. |
| 36 | SPICS | bidirectional | Chip select (CS#) to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 37 | SPIQ | bidirectional | Data output (DO) to off-package flash, powered by VDD_SPI, and also the JTAG source strapping pin GPIO37 path. |
| 38 | SPIWP | bidirectional | Write protect (WP#) line to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 39 | VDD_SPI | power_in | Power rail for the FLASH IO domain, which can be configured as a voltage output by the chip. |
| 40 | SPIHD | bidirectional | Hold (HOLD#) line to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 41 | SPICLK | bidirectional | Clock output to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 42 | SPID | bidirectional | Data input (DI) line from off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 43 | VCCA/VDDPST_2 | power_in | USB PHY and digital HP power domain supply input that powers the USB IO. |
| 44 | USB_DP | bidirectional | USB 2.0 High-Speed OTG PHY D+ pin, dedicated to the USB OTG function. |
| 45 | USB_DM | bidirectional | USB 2.0 High-Speed OTG PHY D- pin, dedicated to the USB OTG function. |
| 46 | GPIO33 | bidirectional | General-purpose IO powered by VDDPST_3 with USB1P1_N0 USB Serial/JTAG function and default drive current of 40 mA. |
| 47 | GPIO34 | bidirectional | General-purpose IO powered by VDDPST_3 with USB1P1_P0 USB Serial/JTAG function and default drive current of 40 mA. |
| 48 | GPIO35 | bidirectional | General-purpose IO powered by VDDPST_3 with SD2 card two data line 0 and REF_GMAC_CLK via IO MUX. |
| 49 | GPIO36 | bidirectional | Strapping pin for VDD_SPI voltage selection at power-up, powered by VDDPST_3, with input enabled. |
| 50 | GPIO37 | bidirectional | Strapping pin for JTAG signal source selection at power-up, also analog comparator pad PAD_COMP0. |
| 51 | GPIO38 | bidirectional | General-purpose IO powered by VDDPST_3 with analog comparator pad PAD_COMP1. |
| 52 | GPIO39 | bidirectional | General-purpose IO powered by VDDPST_3 with analog comparator pad PAD_COMP2. |
| 53 | GPIO40 | bidirectional | General-purpose IO powered by VDDPST_3 with analog comparator pad PAD_COMP3. |
| 54 | VDDPST_3 | power_in | Digital HP power domain supply input that powers the HP IO pins. |
| 55 | GPIO42 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 0 negative input ADC1_CH0_N. |
| 56 | GPIO43 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 0 positive input ADC1_CH0_P. |
| 57 | GPIO44 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 1 negative input ADC1_CH1_N. |
| 58 | GPIO45 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 1 positive input ADC1_CH1_P. |
| 59 | GPIO46 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 2 negative input ADC1_CH2_N. |
| 60 | GPIO47 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 2 positive input ADC1_CH2_P. |
| 61 | GPIO48 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 3 negative input ADC1_CH3_N. |
| 62 | GPIO49 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 3 positive input ADC1_CH3_P. |
| 63 | VREF_ADC | bidirectional | ADC reference voltage pin. |
| 64 | VDDPST_4 | power_in | Digital HP power domain supply input that powers the HP IO pins. |
| 65 | GPIO50 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 0 negative input ADC2_CH0_N. |
| 66 | GPIO51 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 0 positive input ADC2_CH0_P. |
| 67 | GPIO52 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 1 negative input ADC2_CH1_N, input enabled at reset. |
| 68 | GPIO53 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 1 positive input ADC2_CH1_P, input enabled at reset. |
| 69 | MTDO | bidirectional | JTAG test data out pin powered by VDDPST_4, also usable as GPIO54 and ADC2 channel 2 negative input. |
| 70 | MTCK | input | JTAG test clock input pin powered by VDDPST_4, also usable as ADC2 channel 2 positive input. |
| 71 | MTDI | input | JTAG test data input pin powered by VDDPST_4, also usable as ADC2 channel 3 negative input. |
| 72 | MTMS | input | JTAG test mode select input pin powered by VDDPST_4, also usable as ADC2 channel 3 positive input. |
| 73 | GPIO58 | bidirectional | General-purpose IO powered by VDDPST_4 with UART0 TXD output via IO MUX F0. |
| 74 | GPIO59 | bidirectional | General-purpose IO powered by VDDPST_4 with UART0 RXD input via IO MUX F0. |
| 75 | GPIO60 | bidirectional | Strapping pin for chip boot mode selection with weak pull-up at reset (bit value 1), powered by VDDPST_4. |
| 76 | GPIO61 | bidirectional | Strapping pin for chip boot mode selection with weak pull-up at reset (bit value 1), powered by VDDPST_4. |
| 77 | VDDA1 | power_in | Analog power domain supply input. |
| 78 | XTAL_N | passive | External clock input/output for an active or passive crystal oscillator; leave it floating when an active oscillator is connected to XTAL_P. |
| 79 | XTAL_P | passive | External clock input/output for an active or passive crystal oscillator; connect an active oscillator output to this pin. |
| 80 | VDDA2 | power_in | Analog power domain supply input. |
| 81 | GND | power_in | External ground connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm |
| Category | RF and Wireless |
| Pins | 81 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input power pins allowed input voltage | -0.3 | 3.6 | V | 88 | |||
| Cumulative IO output current | 1500 | mA | 88 | ||||
| Storage temperature | TST | -40 | 150 | °C | 88 | ||
| Recommended input voltage | VDDA1, VDDA2, VDDA3, VDDA4 | 3 | 3.3 | 3.6 | V | 88 | |
| Cumulative input current | IVDD | 0.6 | A | 88 | |||
| High-level input current | IIH | 50 | nA | 89 | |||
| Low-level input current | IIL | 50 | nA | 89 | |||
| Power supply voltage (1.8 V) flash | VCC | 1.65 | 1.8 | 2 | V | Power supply voltage (1.8 V) | 92 |
| Power supply voltage (3.3 V) flash | VCC | 2.7 | 3.3 | 3.6 | V | Power supply voltage (3.3 V) | 92 |
| Maximum clock frequency flash | FC | 80 | MHz | Maximum clock frequency | 92 | ||
| Program/erase cycles | 100000 | cycles | 92 | ||||
| Data retention time | TRET | 20 | years | 92 | |||
| Page program time | TPP | 0.8 | 5 | ms | 92 | ||
| Sector erase time (4 KB) | TSE | 70 | 500 | ms | 92 | ||
| Block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 92 | ||
| Block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 92 | ||
| Chip erase time (16 Mb) | TCE | 7 | 20 | s | Chip erase time (16 Mb) | 92 | |
| Chip erase time (32 Mb) | TCE | 20 | 60 | s | Chip erase time (32 Mb) | 92 | |
| Chip erase time (64 Mb) | TCE | 25 | 100 | s | Chip erase time (64 Mb) | 92 | |
| Chip erase time (128 Mb) | TCE | 60 | 200 | s | Chip erase time (128 Mb) | 92 | |
| Chip erase time (256 Mb) | TCE | 70 | 300 | s | Chip erase time (256 Mb) | 92 | |
| Power supply voltage (1.8 V) PSRAM | VCC | 1.62 | 1.8 | 1.98 | V | Power supply voltage (1.8 V) | 92 |
| Power supply voltage (3.3 V) PSRAM | VCC | 2.7 | 3.3 | 3.6 | V | Power supply voltage (3.3 V) | 92 |
| Maximum clock frequency PSRAM | FC | 80 | MHz | Maximum clock frequency | 92 |
CAD (land: Espressif; 3D: manufacturer)
- Symbol:
ESP32-S31NRV16 - Footprint:
PCM_Espressif:QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm - 3D model: QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm (Espressif KiCad libraries, STEP)
- 3D model files:
esp32-s31nrv16-etched.step/esp32-s31nrv16-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-s31nrv16.step/esp32-s31nrv16.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (110 pp, sha256
735d1b18b2907ed7, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.
# ESP32-S31NRV16
**Espressif Systems** · RF and Wireless · QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm
ESP32-S31NRV16 from Espressif Systems, in a QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT | bidirectional | RF input and output pin for the antenna. |
| 2 | VDDA3 | power_in | Analog power domain supply input. |
| 3 | VDDA4 | power_in | Analog power domain supply input. |
| 4 | CHIP_PU | input | Chip enable pin: high level enables the chip and low level disables it, and it must not be left floating. |
| 5 | XTAL_32K_N/GPIO0 | bidirectional | Negative terminal for an external 32 kHz crystal or clock, also usable as GPIO0 with IO MUX and LP IO MUX functions, powered by VDDPST_1. |
| 6 | XTAL_32K_P/GPIO1 | bidirectional | Positive terminal for an external 32 kHz crystal or clock, also usable as GPIO1 with IO MUX and LP IO MUX functions, powered by VDDPST_1. |
| 7 | GPIO2 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and LCD_DATA19 output via F4. |
| 8 | GPIO3 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and LCD_DATA20 output via F4. |
| 9 | GPIO4 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and dedicated DAC channel 0 output. |
| 10 | GPIO5 | bidirectional | General-purpose IO powered by VDDPST_1 with LP IO MUX functions and dedicated DAC channel 1 output. |
| 11 | VDDPST_1 | power_in | Digital LP power domain supply input that powers the LP IO pins. |
| 12 | GPIO6 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH0 and LP IO MUX functions. |
| 13 | GPIO7 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH1 and LP IO MUX functions. |
| 14 | GPIO8 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH2, input enabled at reset. |
| 15 | GPIO9 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH3, input enabled at reset. |
| 16 | GPIO10 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH4, input enabled at reset. |
| 17 | GPIO11 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH5, input enabled at reset. |
| 18 | VREF_TOUCH | bidirectional | TOUCH reference voltage pin. |
| 19 | GPIO12 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH6, input enabled at reset. |
| 20 | GPIO13 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH7, input enabled at reset. |
| 21 | GPIO14 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH8, input enabled at reset. |
| 22 | GPIO15 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH9, input enabled at reset. |
| 23 | GPIO16 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH10, input enabled at reset. |
| 24 | GPIO17 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH11, input enabled at reset. |
| 25 | GPIO18 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH12, input enabled at reset. |
| 26 | GPIO19 | bidirectional | General-purpose IO powered by VDDPST_1 with touch channel TOUCH_CH13, input enabled at reset. |
| 27 | SDIO_DATA0 | bidirectional | SDIO data line 0 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 28 | SDIO_DATA1 | bidirectional | SDIO data line 1 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 29 | SDIO_DATA2 | bidirectional | SDIO data line 2 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 30 | VDD_PSRAM_1P8_1 | power_in | 1.8 V supply input for the PSRAM domain. |
| 31 | SDIO_DATA3 | bidirectional | SDIO data line 3 of card one, powered by the internal VDDPST_SD domain, which is supplied from VDDPST_2 or VDD_LDO_1P8. |
| 32 | SDIO_CLK | bidirectional | Clock of SDIO card one, powered by the internal VDDPST_SD domain. |
| 33 | SDIO_CMD | bidirectional | Command line of SDIO card one, powered by the internal VDDPST_SD domain. |
| 34 | VDD_PSRAM_1P8_2 | power_in | 1.8 V supply input for the PSRAM domain. |
| 35 | VDD_LDO_1P8 | power_out | 1.8 V regulator output that supplies the PSRAM, FLASH and SD IO domains. |
| 36 | SPICS | bidirectional | Chip select (CS#) to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 37 | SPIQ | bidirectional | Data output (DO) to off-package flash, powered by VDD_SPI, and also the JTAG source strapping pin GPIO37 path. |
| 38 | SPIWP | bidirectional | Write protect (WP#) line to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 39 | VDD_SPI | power_in | Power rail for the FLASH IO domain, which can be configured as a voltage output by the chip. |
| 40 | SPIHD | bidirectional | Hold (HOLD#) line to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 41 | SPICLK | bidirectional | Clock output to off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 42 | SPID | bidirectional | Data input (DI) line from off-package flash, powered by VDD_SPI with weak pull-up at reset. |
| 43 | VCCA/VDDPST_2 | power_in | USB PHY and digital HP power domain supply input that powers the USB IO. |
| 44 | USB_DP | bidirectional | USB 2.0 High-Speed OTG PHY D+ pin, dedicated to the USB OTG function. |
| 45 | USB_DM | bidirectional | USB 2.0 High-Speed OTG PHY D- pin, dedicated to the USB OTG function. |
| 46 | GPIO33 | bidirectional | General-purpose IO powered by VDDPST_3 with USB1P1_N0 USB Serial/JTAG function and default drive current of 40 mA. |
| 47 | GPIO34 | bidirectional | General-purpose IO powered by VDDPST_3 with USB1P1_P0 USB Serial/JTAG function and default drive current of 40 mA. |
| 48 | GPIO35 | bidirectional | General-purpose IO powered by VDDPST_3 with SD2 card two data line 0 and REF_GMAC_CLK via IO MUX. |
| 49 | GPIO36 | bidirectional | Strapping pin for VDD_SPI voltage selection at power-up, powered by VDDPST_3, with input enabled. |
| 50 | GPIO37 | bidirectional | Strapping pin for JTAG signal source selection at power-up, also analog comparator pad PAD_COMP0. |
| 51 | GPIO38 | bidirectional | General-purpose IO powered by VDDPST_3 with analog comparator pad PAD_COMP1. |
| 52 | GPIO39 | bidirectional | General-purpose IO powered by VDDPST_3 with analog comparator pad PAD_COMP2. |
| 53 | GPIO40 | bidirectional | General-purpose IO powered by VDDPST_3 with analog comparator pad PAD_COMP3. |
| 54 | VDDPST_3 | power_in | Digital HP power domain supply input that powers the HP IO pins. |
| 55 | GPIO42 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 0 negative input ADC1_CH0_N. |
| 56 | GPIO43 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 0 positive input ADC1_CH0_P. |
| 57 | GPIO44 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 1 negative input ADC1_CH1_N. |
| 58 | GPIO45 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 1 positive input ADC1_CH1_P. |
| 59 | GPIO46 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 2 negative input ADC1_CH2_N. |
| 60 | GPIO47 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 2 positive input ADC1_CH2_P. |
| 61 | GPIO48 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 3 negative input ADC1_CH3_N. |
| 62 | GPIO49 | bidirectional | General-purpose IO powered by VDDPST_3 with ADC1 channel 3 positive input ADC1_CH3_P. |
| 63 | VREF_ADC | bidirectional | ADC reference voltage pin. |
| 64 | VDDPST_4 | power_in | Digital HP power domain supply input that powers the HP IO pins. |
| 65 | GPIO50 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 0 negative input ADC2_CH0_N. |
| 66 | GPIO51 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 0 positive input ADC2_CH0_P. |
| 67 | GPIO52 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 1 negative input ADC2_CH1_N, input enabled at reset. |
| 68 | GPIO53 | bidirectional | General-purpose IO powered by VDDPST_4 with ADC2 channel 1 positive input ADC2_CH1_P, input enabled at reset. |
| 69 | MTDO | bidirectional | JTAG test data out pin powered by VDDPST_4, also usable as GPIO54 and ADC2 channel 2 negative input. |
| 70 | MTCK | input | JTAG test clock input pin powered by VDDPST_4, also usable as ADC2 channel 2 positive input. |
| 71 | MTDI | input | JTAG test data input pin powered by VDDPST_4, also usable as ADC2 channel 3 negative input. |
| 72 | MTMS | input | JTAG test mode select input pin powered by VDDPST_4, also usable as ADC2 channel 3 positive input. |
| 73 | GPIO58 | bidirectional | General-purpose IO powered by VDDPST_4 with UART0 TXD output via IO MUX F0. |
| 74 | GPIO59 | bidirectional | General-purpose IO powered by VDDPST_4 with UART0 RXD input via IO MUX F0. |
| 75 | GPIO60 | bidirectional | Strapping pin for chip boot mode selection with weak pull-up at reset (bit value 1), powered by VDDPST_4. |
| 76 | GPIO61 | bidirectional | Strapping pin for chip boot mode selection with weak pull-up at reset (bit value 1), powered by VDDPST_4. |
| 77 | VDDA1 | power_in | Analog power domain supply input. |
| 78 | XTAL_N | passive | External clock input/output for an active or passive crystal oscillator; leave it floating when an active oscillator is connected to XTAL_P. |
| 79 | XTAL_P | passive | External clock input/output for an active or passive crystal oscillator; connect an active oscillator output to this pin. |
| 80 | VDDA2 | power_in | Analog power domain supply input. |
| 81 | GND | power_in | External ground connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm |
| Category | RF and Wireless |
| Pins | 81 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input power pins allowed input voltage | | -0.3 | | 3.6 | V | | 88 |
| Cumulative IO output current | | | | 1500 | mA | | 88 |
| Storage temperature | TST | -40 | | 150 | °C | | 88 |
| Recommended input voltage | VDDA1, VDDA2, VDDA3, VDDA4 | 3 | 3.3 | 3.6 | V | | 88 |
| Cumulative input current | IVDD | 0.6 | | | A | | 88 |
| High-level input current | IIH | | | 50 | nA | | 89 |
| Low-level input current | IIL | | | 50 | nA | | 89 |
| Power supply voltage (1.8 V) flash | VCC | 1.65 | 1.8 | 2 | V | Power supply voltage (1.8 V) | 92 |
| Power supply voltage (3.3 V) flash | VCC | 2.7 | 3.3 | 3.6 | V | Power supply voltage (3.3 V) | 92 |
| Maximum clock frequency flash | FC | 80 | | | MHz | Maximum clock frequency | 92 |
| Program/erase cycles | | 100000 | | | cycles | | 92 |
| Data retention time | TRET | 20 | | | years | | 92 |
| Page program time | TPP | | 0.8 | 5 | ms | | 92 |
| Sector erase time (4 KB) | TSE | | 70 | 500 | ms | | 92 |
| Block erase time (32 KB) | TBE1 | | 0.2 | 2 | s | | 92 |
| Block erase time (64 KB) | TBE2 | | 0.3 | 3 | s | | 92 |
| Chip erase time (16 Mb) | TCE | | 7 | 20 | s | Chip erase time (16 Mb) | 92 |
| Chip erase time (32 Mb) | TCE | | 20 | 60 | s | Chip erase time (32 Mb) | 92 |
| Chip erase time (64 Mb) | TCE | | 25 | 100 | s | Chip erase time (64 Mb) | 92 |
| Chip erase time (128 Mb) | TCE | | 60 | 200 | s | Chip erase time (128 Mb) | 92 |
| Chip erase time (256 Mb) | TCE | | 70 | 300 | s | Chip erase time (256 Mb) | 92 |
| Power supply voltage (1.8 V) PSRAM | VCC | 1.62 | 1.8 | 1.98 | V | Power supply voltage (1.8 V) | 92 |
| Power supply voltage (3.3 V) PSRAM | VCC | 2.7 | 3.3 | 3.6 | V | Power supply voltage (3.3 V) | 92 |
| Maximum clock frequency PSRAM | FC | 80 | | | MHz | Maximum clock frequency | 92 |
## CAD (land: Espressif; 3D: manufacturer)
- Symbol: `ESP32-S31NRV16`
- Footprint: `PCM_Espressif:QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm`
- 3D model: QFN-80-1EP_8x8mm_P0.35mm_EP6.5x6.5mm (Espressif KiCad libraries, STEP)
- 3D model files: `esp32-s31nrv16-etched.step` / `esp32-s31nrv16-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esp32-s31nrv16.step` / `esp32-s31nrv16.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Espressif Systems datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-s31_datasheet_en.pdf) (110 pp, sha256 `735d1b18b2907ed7`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.
[Datasheet PDF](docs/esp32-s31nrv16-datasheet.pdf)