Made with KiCad · KiCad file format 20221018
ESP32-S2-WROOM-I-N4
Espressif Systems · RF and Wireless · 56-VFQFN Exposed Pad
ESP32-S2-WROOM-I-N4 from Espressif Systems, in a 56-VFQFN Exposed Pad. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | 3V3 | power_in | Power supply, recommended 3.0 V to 3.6 V (3.3 V typical). |
| 3 | IO0 | bidirectional | RTC_GPIO0/GPIO0; strapping pin for chip boot mode, internal pull-up at reset (bit value 1). |
| 4 | IO1 | bidirectional | RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0. |
| 5 | IO2 | bidirectional | RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1. |
| 6 | IO3 | bidirectional | RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2. |
| 7 | IO4 | bidirectional | RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3. |
| 8 | IO5 | bidirectional | RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4. |
| 9 | IO6 | bidirectional | RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5. |
| 10 | IO7 | bidirectional | RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6. |
| 11 | IO8 | bidirectional | RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7. |
| 12 | IO9 | bidirectional | RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD. |
| 13 | IO10 | bidirectional | RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4. |
| 14 | IO11 | bidirectional | RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5. |
| 15 | IO12 | bidirectional | RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6. |
| 16 | IO13 | bidirectional | RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7. |
| 17 | IO14 | bidirectional | RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS. |
| 18 | IO15 | bidirectional | RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P. |
| 19 | IO16 | bidirectional | RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N. |
| 20 | IO17 | bidirectional | RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6, DAC_1. |
| 21 | IO18 | bidirectional | RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, DAC_2, CLK_OUT3. |
| 22 | IO19 | bidirectional | RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-. |
| 23 | IO20 | bidirectional | RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+. |
| 24 | IO21 | bidirectional | RTC_GPIO21, GPIO21. |
| 25 | IO26 | bidirectional | SPICS1, GPIO26. |
| 26 | GND | power_in | Ground. |
| 27 | IO33 | bidirectional | SPIIO4, GPIO33, FSPIHD. |
| 28 | IO34 | bidirectional | SPIIO5, GPIO34, FSPICS0. |
| 29 | IO35 | bidirectional | SPIIO6, GPIO35, FSPID. |
| 30 | IO36 | bidirectional | SPIIO7, GPIO36, FSPICLK. |
| 31 | IO37 | bidirectional | SPIDQS, GPIO37, FSPIQ. |
| 32 | IO38 | bidirectional | GPIO38, FSPIWP. |
| 33 | IO39 | bidirectional | MTCK, GPIO39, CLK_OUT3. |
| 34 | IO40 | bidirectional | MTDO, GPIO40, CLK_OUT2. |
| 35 | IO41 | bidirectional | MTDI, GPIO41, CLK_OUT1. |
| 36 | IO42 | bidirectional | MTMS, GPIO42. |
| 37 | TXD0 | bidirectional | U0TXD, GPIO43, CLK_OUT1. |
| 38 | RXD0 | bidirectional | U0RXD, GPIO44, CLK_OUT2. |
| 39 | IO45 | bidirectional | GPIO45; strapping pin for VDD_SPI voltage, internal pull-down at reset (bit value 0). |
| 40 | IO46 | input | GPIO46 input; strapping pin for chip boot mode and ROM message printing, internal pull-down at reset (bit value 0). |
| 41 | EN | input | High enables the chip, low powers the chip off; do not leave the EN pin floating. |
| 42 | GND | power_in | Ground. |
| 43 | GND | power_in | Ground: centre pad, labelled 'Pin 43 GND' in Figure 3 (3x3 GND sub-pads) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | 56-VFQFN Exposed Pad |
| Category | RF and Wireless |
| Pins | 43 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Crystal frequency tolerance | Y1 | -10 | 10 | ppm | 40MHz(±10ppm) crystal Y1 as printed in module schematic | 20 | |
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 14 | ||
| Storage temperature | TSTORE | -40 | 85 | °C | 14 | ||
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | 14 | |
| Current delivered by external power supply | IVDD | 0.5 | A | 14 | |||
| Operating ambient temperature | TA | -40 | 85 | °C | 14 | ||
| High-level input current | IIH | 50 | nA | 14 | |||
| Low-level input current | IIL | 50 | nA | 14 | |||
| TX EVM | -24 | -10 | dB | 802.11b, 1 Mbps, DSSS | 17 | ||
| TX EVM | -25 | -5 | dB | 802.11g, 6 Mbps, OFDM | 17 | ||
| TX EVM | -28 | -25 | dB | 802.11g, 54 Mbps, OFDM | 17 | ||
| TX EVM | -30 | -27 | dB | 802.11n, HT20, MCS7 | 17 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Solder, Sn-Ag-Cu (SAC305) lead-free solder alloy Figure 12: Reflow Profile | 27 |
CAD (land: Espressif; 3D: Espressif Systems)
- Symbol:
ESP32-S2-WROOM-I-N4 - Footprint:
PCM_Espressif:ESP32-S2-WROOM - 3D model: 56-VFQFN Exposed Pad (Espressif KiCad libraries, STEP)
- 3D model files:
esp32-s2-wroom-i-n4-etched.step/esp32-s2-wroom-i-n4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-s2-wroom-i-n4.step/esp32-s2-wroom-i-n4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (32 pp, sha256
ee6d88b23241323c, retrieved 2026-11-17) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.