ESP32-S2-DevKitC-1
Espressif Systems · development board · ESP32-S2-SOLO · orderable as ESP32-S2-DEVKITC-1R, ESP32-S2-DEVKITC-1-N8R2
This page carries the board as a part, so a carrier board or a breakout molecule can place it: the header pinout as a symbol, the header pattern as a footprint, and a 3D model of the board standing on its headers.
Footprint
J1 (22 pins) and J3 (22 pins) at 2.54 mm, from Espressif's dimension drawing. The footprint origin is the centre of the header pattern; F.Fab draws the board (25.40 x 62.84 mm) and the module. The module's antenna runs 6.31 mm past the board edge; the footprint keeps copper out from under that overhang.
Pinout
As printed in Espressif's user guide (current revision). Pin 1 of each header is at the module end.
J1
| No. | Name | Function |
|---|---|---|
| 1 | 3V3 | 3.3 V power supply |
| 2 | 3V3 | 3.3 V power supply |
| 3 | RST | CHIP_PU |
| 4 | 4 | RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3 |
| 5 | 5 | RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4 |
| 6 | 6 | RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5 |
| 7 | 7 | RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6 |
| 8 | 15 | RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P |
| 9 | 16 | RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N |
| 10 | 17 | RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6, DAC_1 |
| 11 | 18 | RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, DAC_2, CLK_OUT3, RGB LED |
| 12 | 8 | RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7 |
| 13 | 3 | RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2 |
| 14 | 46 | GPIO46 |
| 15 | 9 | RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD |
| 16 | 10 | RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4 |
| 17 | 11 | RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5 |
| 18 | 12 | RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6 |
| 19 | 13 | RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7 |
| 20 | 14 | RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS |
| 21 | 5V | 5 V power supply |
| 22 | G | Ground |
J3
| No. | Name | Function |
|---|---|---|
| 1 | G | Ground |
| 2 | TX | U0TXD, GPIO43, CLK_OUT1 |
| 3 | RX | U0RXD, GPIO44, CLK_OUT2 |
| 4 | 1 | RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0 |
| 5 | 2 | RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1 |
| 6 | 42 | MTMS, GPIO42 |
| 7 | 41 | MTDI, GPIO41, CLK_OUT1 |
| 8 | 40 | MTDO, GPIO40, CLK_OUT2 |
| 9 | 39 | MTCK, GPIO39, CLK_OUT3 |
| 10 | 38 | GPIO38, FSPIWP |
| 11 | 37 | SPIDQS, GPIO37, FSPIQ |
| 12 | 36 | SPIIO7, GPIO36, FSPICLK |
| 13 | 35 | SPIIO6, GPIO35, FSPID |
| 14 | 0 | RTC_GPIO0, GPIO0 |
| 15 | 45 | GPIO45 |
| 16 | 34 | SPIIO5, GPIO34, FSPICS0 |
| 17 | 33 | SPIIO4, GPIO33, FSPIHD |
| 18 | 21 | RTC_GPIO21, GPIO21 |
| 19 | 20 | RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+ |
| 20 | 19 | RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D- |
| 21 | G | Ground |
| 22 | G | Ground |
3D model
Rebuilt from Espressif's own manufacturing data: the PCB layout plots (PCB_ESP32-S2-DevKitC-1_V1_20210508.pdf) give every part, pad and silkscreen line as Espressif drew them (each pad placed on its plotted copper), and the dimension DXF gives the outline and drills. Every part is identified from Espressif's schematic (SCH_ESP32-S2-DEVKITC-1_V1_20220817) and the BOM Espressif publishes for the same layout family (ESP32-S3-DevKitC-1 Reference Design), and each part with an Adom page carries that page's laser-etched model; every model is fitted to its pads in the plot (worst fit 0.28 mm, Q1/Q2: Espressif's SOT-23 land is longer than the part). The module is Espressif's ESP32-S2-SOLO model (espressif/kicad-libraries) with its name etched. The headers are mounted below the board, as the kit ships. The solder mask is black, as in Espressif's user-guide photos.
- J2/J4: Minle 1110-205001 / U-wilcome I42-0531-3121 per Espressif BOM; no maker datasheet found; model generated from the USB Micro-B standard (the chamfered "D" mouth and tongue) plus the BOM's stated height/width, on Espressif's land.
- SW1/SW2: Misaki NTC013-AT1J-A160T per Espressif BOM; model = PTS810 matching the NTC_013 series sheet dimensions (4.6 x 3.2 x 2.5 mm).
- D6: SK68XXMINI-HS on the schematic, orderable as Opsco SK6812MINI-HS: its own page, adom/sk6812mini-hs, carries the model.
- D5 (red 0603 LED): neither BOM part (NationStar FC-DA1608HRK-620D, BD-PT0603R6C-C01-4T) has a listing or datasheet we could find, so it carries KiCad's 0603 LED model and no page.
- C13, C14, C15 and R14 are marked NC on Espressif's schematic: not populated on the shipped board, so their pads are bare on purpose.
Parts on the board
| Ref | Part | Page | 3D model |
|---|---|---|---|
| C1 | 10uF/25V(20%) | adom/10u-0603-capacitors | KiCad library |
| C2 | 0.1uF/50V(10%) | adom/100n-0402-capacitors | KiCad library |
| C3 | 10uF/25V(20%) | adom/10u-0603-capacitors | KiCad library |
| C6 | 1uF/16V(10%) | adom/1u-0402-capacitors | KiCad library |
| C7 | 10uF/25V(20%) | adom/10u-0603-capacitors | KiCad library |
| C8 | 0.1uF/50V(10%) | adom/100n-0402-capacitors | KiCad library |
| C9 | 0.1uF/50V(10%) | adom/100n-0402-capacitors | KiCad library |
| C10 | 10uF/25V(20%) | adom/10u-0603-capacitors | KiCad library |
| C11 | 10uF/25V(20%) | adom/10u-0603-capacitors | KiCad library |
| C12 | 1uF/16V(10%) | adom/1u-0402-capacitors | KiCad library |
| C13 | 0.1uF/50V(10%)(NC) | (none) | not populated (DNP) (C13 is not populated on the shipped board (marked (NC) on Espressif schematic SCH_ESP32-S2-DEVKITC-1_V1_20220817); footprint shown bare on purpose.) |
| C14 | 0.1uF/50V(10%)(NC) | (none) | not populated (DNP) (C14 is not populated on the shipped board (marked (NC) on Espressif schematic SCH_ESP32-S2-DEVKITC-1_V1_20220817); footprint shown bare on purpose.) |
| C15 | 10uF/25V(20%)(NC) | (none) | not populated (DNP) (C15 is not populated on the shipped board (marked (NC) on Espressif schematic SCH_ESP32-S2-DEVKITC-1_V1_20220817); footprint shown bare on purpose.) |
| D1 | 1N5819HW-7-F |
adom/1n5819hw-7-f | adom page (factory model) |
| D2 | LESD5D5.0CT1G |
adom/lesd5d5-0ct1g | adom page (factory model) |
| D3 | LESD5D5.0CT1G |
adom/lesd5d5-0ct1g | adom page (factory model) |
| D4 | LESD5D5.0CT1G |
adom/lesd5d5-0ct1g | adom page (factory model) |
| D5 | RED LED | (none) | KiCad library |
| D6 | SK6812MINI-HS (SK68XXMINI-HS) |
adom/sk6812mini-hs | adom page (factory model) |
| D7 | 1N5819HW-7-F |
adom/1n5819hw-7-f | adom page (factory model) |
| D8 | LESD5D5.0CT1G |
adom/lesd5d5-0ct1g | adom page (factory model) |
| D9 | LESD5D5.0CT1G |
adom/lesd5d5-0ct1g | adom page (factory model) |
| D10 | LESD5D5.0CT1G |
adom/lesd5d5-0ct1g | adom page (factory model) |
| J1 | CON22X1 pin header | (none) | KiCad library |
| J2 | 1110-205001 (MICRO USB) |
(none) | generated (USB Micro-B standard + Espressif BOM height/width, on Espressif land) |
| J3 | CON22X1 pin header | (none) | KiCad library |
| J4 | 1110-205001 (MICRO USB) |
(none) | generated (USB Micro-B standard + Espressif BOM height/width, on Espressif land) |
| Q1 | L8050QLT1G |
adom/l8050qlt1g | adom page (factory model) |
| Q2 | L8050QLT1G |
adom/l8050qlt1g | adom page (factory model) |
| R5 | 10K(1%) | adom/10k-0402-resistors | KiCad library |
| R7 | 0(1%) | adom/0p-0402-resistors | KiCad library |
| R8 | 0(1%) | adom/0p-0402-resistors | KiCad library |
| R9 | 0(1%) | adom/0p-0402-resistors | KiCad library |
| R10 | 10K(1%) | adom/10k-0402-resistors | KiCad library |
| R11 | 5.1K(1%) | adom/5-1k-0402-resistors | KiCad library |
| R12 | 10K(1%) | adom/10k-0402-resistors | KiCad library |
| R13 | 0(1%) | adom/0p-0402-resistors | KiCad library |
| R14 | 10K(1%)(NC) | (none) | not populated (DNP) (R14 is not populated on the shipped board (marked (NC) on Espressif schematic SCH_ESP32-S2-DEVKITC-1_V1_20220817); footprint shown bare on purpose.) |
| R16 | 1K(1%) | adom/1k-0402-resistors | KiCad library |
| R17 | 0(1%) | adom/0p-0402-resistors | KiCad library |
| R18 | 47.5K(1%) | adom/47-5k-0402-resistors | KiCad library |
| R19 | 22.1K(1%) | adom/22-1k-0402-resistors | KiCad library |
| R24 | 0(1%) | adom/0p-0603-resistors | KiCad library |
| R25 | 10K(1%) | adom/10k-0402-resistors | KiCad library |
| SW1 | NTC013-AT1J-A160T |
(none) | KiCad library (C&K PTS810, 4.6 x 3.2 x 2.5 = NTC_013 series sheet) |
| SW2 | NTC013-AT1J-A160T |
(none) | KiCad library (C&K PTS810, 4.6 x 3.2 x 2.5 = NTC_013 series sheet) |
| U2 | SGM2212-3.3XKC3G/TR |
adom/sgm2212-3-3xkc3g | adom page (factory model) |
| U3 | CP2102N-A02-GQFN28R (CP2102N-A02-GQFN28) |
adom/cp2102n-a02-gqfn28r | adom page (factory model) |
| U4 | ESP32-S2-SOLO |
adom/esp32-s2-solo-n4 | Espressif module STEP (laser-etched) |
Documents
- User guide (Espressif, web)
- Module datasheet (ESP32-S2-SOLO, v1.8): docs/esp32-s2-devkitc-1-module-esp32-s2-solo-datasheet.pdf, from Espressif
- Module datasheet (ESP32-S2-SOLO-2, v1.4): docs/esp32-s2-devkitc-1-module-esp32-s2-solo-2-datasheet.pdf, from Espressif
- Schematic: docs/esp32-s2-devkitc-1-schematic.pdf, from Espressif
- Dimensions: docs/esp32-s2-devkitc-1-dimensions.pdf, from Espressif
Modules: schematic: four module options, ESP32-S2-SOLO, -SOLO-U, -SOLO-2, -SOLO-2U (two datasheets cover all four).