component
ESP32-P4NRW32X
Public Made by Adomby adom
Espressif Systems Integrated Circuits (ICs), 104-VFQFN Exposed Pad. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D. Chip revision v3.x, the newer revision of ESP32-P4NRW32 (v1.x).
main
Ray
Set visibility: public
e366474
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183
{
"schema_version": 1,
"type": "component",
"slug": "esp32-p4nrw32x",
"title": "ESP32-P4NRW32X",
"brief": "Espressif Systems Integrated Circuits (ICs), 104-VFQFN Exposed Pad. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D. Chip revision v3.x, the newer revision of ESP32-P4NRW32 (v1.x).",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"integrated circuits (ics)",
"esp32-p4nrw32x",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "ESP32-P4NRW32X",
"manufacturer": "Espressif Systems",
"package": "104-VFQFN Exposed Pad",
"pin_count": 105,
"category": "Integrated Circuits (ICs)",
"subcategory": "Integrated Circuits (ICs)",
"datasheet": "https://www.espressif.com/sites/default/files/documentation/esp32-p4_datasheet_en.pdf",
"parts": {
"symbol": "esp32-p4nrw32x.kicad_sym",
"footprint": "esp32-p4nrw32x.kicad_mod",
"model_3d": "esp32-p4nrw32x-hero.glb",
"model_3d_plain": "esp32-p4nrw32x-etched.glb",
"model_3d_step": "esp32-p4nrw32x-etched.step",
"model_3d_step_plain": "esp32-p4nrw32x.step",
"lbr": "esp32-p4nrw32x.lbr"
},
"distributor_links": {
"digikey": "1965-ESP32-P4NRW32XTR-ND",
"mouser": "356-ESP32-P4NRW32X"
},
"distributor_check": {
"checked_at": "2026-10-28T19:24:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "1965-ESP32-P4NRW32XTR-ND",
"status": "found"
},
"mouser": {
"pn": "356-ESP32-P4NRW32X",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO1",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP/VDD_BAT with IO MUX, LP IO MUX and analog (XTAL_32K_P) functions; default drive strength 20 mA."
},
{
"number": "2",
"name": "GPIO2",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP/VDD_BAT with input enabled and weak pull-up at reset; F0 is JTAG MTCK and it also serves as TOUCH_CHANNEL1; default drive strength 20 mA."
},
{
"number": "3",
"name": "GPIO3",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP/VDD_BAT with input enabled at reset; F0 is JTAG MTDI and it also serves as TOUCH_CHANNEL2; default drive strength 20 mA."
},
{
"number": "4",
"name": "GPIO4",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP with input enabled at reset; F0 is JTAG MTMS and it also serves as TOUCH_CHANNEL3; default drive strength 20 mA."
},
{
"number": "5",
"name": "GPIO5",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F0 is JTAG MTDO and it also serves as TOUCH_CHANNEL4; default drive strength 20 mA."
},
{
"number": "6",
"name": "GPIO6",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F2 is SPI2_HOLD_PAD and it also serves as TOUCH_CHANNEL5; default drive strength 20 mA."
},
{
"number": "7",
"name": "GPIO7",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F2 is SPI2_CS_PAD and it also serves as TOUCH_CHANNEL6; default drive strength 20 mA."
},
{
"number": "8",
"name": "GPIO8",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F1 is UART0_RTS, F2 is SPI2_D_PAD, and it also serves as TOUCH_CHANNEL7; default drive strength 20 mA."
},
{
"number": "9",
"name": "VDD_LP",
"type": "power_in",
"description": "Power input for the LP power domain that supplies LP IO pins; recommended input voltage 3.0-3.6 V (typ. 3.3 V)."
},
{
"number": "10",
"name": "GPIO9",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F1 is UART0_CTS, F2 is SPI2_CK_PAD, and it also serves as TOUCH_CHANNEL8; default drive strength 20 mA."
},
{
"number": "11",
"name": "GPIO10",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F1 is UART1_TXD, F2 is SPI2_Q_PAD, and it also serves as TOUCH_CHANNEL9; default drive strength 20 mA."
},
{
"number": "12",
"name": "GPIO11",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F1 is UART1_RXD, F2 is SPI2_WP_PAD, and it also serves as TOUCH_CHANNEL10; default drive strength 20 mA."
},
{
"number": "13",
"name": "GPIO12",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F1 is UART1_RTS and it also serves as TOUCH_CHANNEL11; default drive strength 20 mA."
},
{
"number": "14",
"name": "GPIO13",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; F1 is UART1_CTS and it also serves as TOUCH_CHANNEL12; default drive strength 20 mA."
},
{
"number": "15",
"name": "GPIO14",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; LP IO MUX function LP_UART_TXD and it also serves as TOUCH_CHANNEL13; default drive strength 20 mA."
},
{
"number": "16",
"name": "GPIO15",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP; LP IO MUX function LP_UART_RXD and it also serves as TOUCH_CHANNEL14; default drive strength 20 mA."
},
{
"number": "17",
"name": "GPIO16",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL0; default drive strength 20 mA."
},
{
"number": "18",
"name": "GPIO17",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL1; default drive strength 20 mA."
},
{
"number": "19",
"name": "GPIO18",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL2; default drive strength 20 mA."
},
{
"number": "20",
"name": "GPIO19",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL3; default drive strength 20 mA."
},
{
"number": "21",
"name": "VDD_IO_0",
"type": "power_in",
"description": "Digital power domain input for HP IO pins GPIO16-GPIO23; recommended input voltage 1.65-3.6 V (typ. 1.8 V)."
},
{
"number": "22",
"name": "GPIO20",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL4; default drive strength 20 mA."
},
{
"number": "23",
"name": "GPIO21",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL5; default drive strength 20 mA."
},
{
"number": "24",
"name": "GPIO22",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL6; default drive strength 20 mA."
},
{
"number": "25",
"name": "GPIO23",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_0 with analog function ADC1_CHANNEL7; F2 is REF_50M_CLK_PAD output; default drive strength 20 mA."
},
{
"number": "26",
"name": "VDD_HP_0",
"type": "power_in",
"description": "Digital power domain input for the HP core, with absolute maximum allowed input voltage of 0-1.3 V."
},
{
"number": "27",
"name": "FLASH_CS",
"type": "output",
"description": "Dedicated off-package flash chip-select output (CS#), powered by VDD_FLASHIO."
},
{
"number": "28",
"name": "FLASH_Q",
"type": "bidirectional",
"description": "Dedicated off-package flash data output (DO) pin, powered by VDD_FLASHIO."
},
{
"number": "29",
"name": "FLASH_WP",
"type": "bidirectional",
"description": "Dedicated off-package flash write-protect (WP#) pin, powered by VDD_FLASHIO."
},
{
"number": "30",
"name": "VDD_FLASHIO",
"type": "power_in",
"description": "Power input for flash IO, to be adjusted to the flash model (examples in the datasheet use 3.3 V flash); recommended range 1.65-3.6 V."
},
{
"number": "31",
"name": "FLASH_HOLD",
"type": "bidirectional",
"description": "Dedicated off-package flash hold (HOLD#) pin, powered by VDD_FLASHIO."
},
{
"number": "32",
"name": "FLASH_CK",
"type": "output",
"description": "Dedicated off-package flash clock output (CLK), powered by VDD_FLASHIO."
},
{
"number": "33",
"name": "FLASH_D",
"type": "bidirectional",
"description": "Dedicated off-package flash data input (DI) pin, powered by VDD_FLASHIO."
},
{
"number": "34",
"name": "DSI_REXT",
"type": "bidirectional",
"description": "MIPI DSI PHY connection for the 4.02 kΩ external reference resistor, powered by VDD_MIPI_DPHY."
},
{
"number": "35",
"name": "DSI_DATAP1",
"type": "bidirectional",
"description": "MIPI DSI PHY positive data channel 1 (2-lane, 1.5 Gbps per lane), powered by VDD_MIPI_DPHY."
},
{
"number": "36",
"name": "DSI_DATAN1",
"type": "bidirectional",
"description": "MIPI DSI PHY negative data channel 1, powered by VDD_MIPI_DPHY."
},
{
"number": "37",
"name": "DSI_CLKN",
"type": "bidirectional",
"description": "MIPI DSI PHY negative clock channel, powered by VDD_MIPI_DPHY."
},
{
"number": "38",
"name": "DSI_CLKP",
"type": "bidirectional",
"description": "MIPI DSI PHY positive clock channel, powered by VDD_MIPI_DPHY."
},
{
"number": "39",
"name": "DSI_DATAP0",
"type": "bidirectional",
"description": "MIPI DSI PHY positive data channel 0, powered by VDD_MIPI_DPHY."
},
{
"number": "40",
"name": "DSI_DATAN0",
"type": "bidirectional",
"description": "MIPI DSI PHY negative data channel 0, powered by VDD_MIPI_DPHY."
},
{
"number": "41",
"name": "VDD_MIPI_DPHY",
"type": "power_in",
"description": "Power input for the MIPI PHY domain, with absolute maximum allowed input voltage of 0-2.75 V."
},
{
"number": "42",
"name": "CSI_DATAN0",
"type": "bidirectional",
"description": "MIPI CSI PHY negative data channel 0, powered by VDD_MIPI_DPHY."
},
{
"number": "43",
"name": "CSI_DATAP0",
"type": "bidirectional",
"description": "MIPI CSI PHY positive data channel 0, powered by VDD_MIPI_DPHY."
},
{
"number": "44",
"name": "CSI_CLKP",
"type": "bidirectional",
"description": "MIPI CSI PHY positive clock channel, powered by VDD_MIPI_DPHY."
},
{
"number": "45",
"name": "CSI_CLKN",
"type": "bidirectional",
"description": "MIPI CSI PHY negative clock channel, powered by VDD_MIPI_DPHY."
},
{
"number": "46",
"name": "CSI_DATAN1",
"type": "bidirectional",
"description": "MIPI CSI PHY negative data channel 1, powered by VDD_MIPI_DPHY."
},
{
"number": "47",
"name": "CSI_DATAP1",
"type": "bidirectional",
"description": "MIPI CSI PHY positive data channel 1, powered by VDD_MIPI_DPHY."
},
{
"number": "48",
"name": "CSI_REXT",
"type": "bidirectional",
"description": "MIPI CSI PHY connection for the 4.02 kΩ external reference resistor, powered by VDD_MIPI_DPHY."
},
{
"number": "49",
"name": "USB_DM",
"type": "bidirectional",
"description": "USB 2.0 High-Speed OTG PHY D- (USB_D-) dedicated pin."
},
{
"number": "50",
"name": "USB_DP",
"type": "bidirectional",
"description": "USB 2.0 High-Speed OTG PHY D+ (USB_D+) dedicated pin."
},
{
"number": "51",
"name": "VDD_USBPHY",
"type": "power_in",
"description": "Power input for the USB PHY, with absolute maximum allowed input voltage of -0.66-3.96 V."
},
{
"number": "52",
"name": "GPIO24",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4; by default it is the USB1P1_N0 USB Serial/JTAG D- signal, and its default drive strength is 40 mA."
},
{
"number": "53",
"name": "GPIO25",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4; by default it is the USB1P1_P0 USB Serial/JTAG D+ signal with USB pull-up enabled at reset, and its default drive strength is 40 mA."
},
{
"number": "54",
"name": "VDD_HP_1",
"type": "power_in",
"description": "Digital power domain input for the HP core, with absolute maximum allowed input voltage of 0-1.3 V."
},
{
"number": "55",
"name": "GPIO26",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4 with USB1P1_N1 (USB 2.0 Full-Speed OTG D-) analog function; default drive strength 20 mA."
},
{
"number": "56",
"name": "GPIO27",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4 with USB1P1_P1 (USB 2.0 Full-Speed OTG D+) analog function; default drive strength 20 mA."
},
{
"number": "57",
"name": "GPIO28",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4; F2 is SPI2_CS_PAD and F3 is GMAC_PHY_RXDV_PAD; default drive strength 20 mA."
},
{
"number": "58",
"name": "GPIO29",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4; F2 is SPI2_D_PAD and F3 is GMAC_PHY_RXD0_PAD; default drive strength 20 mA."
},
{
"number": "59",
"name": "VDD_PSRAM_0",
"type": "power_in",
"description": "Power input for PSRAM IO; recommended input voltage 1.65-1.95 V (typ. 1.8 V)."
},
{
"number": "60",
"name": "GPIO30",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4; F2 is SPI2_CK_PAD and F3 is GMAC_PHY_RXD1_PAD; default drive strength 20 mA."
},
{
"number": "61",
"name": "GPIO31",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4; F2 is SPI2_Q_PAD and F3 is GMAC_PHY_RXER_PAD; default drive strength 20 mA."
},
{
"number": "62",
"name": "VDD_IO_4",
"type": "power_in",
"description": "Digital power domain input for HP IO pins GPIO24-GPIO38 group; recommended input voltage 1.65-3.6 V (typ. 1.8 V)."
},
{
"number": "63",
"name": "GPIO32",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4 with input enabled at reset; F2 is SPI2_HOLD_PAD, F3 is GMAC_RMII_CLK_PAD, and it is a dedicated I3C master SCL pin with configurable pull-up."
},
{
"number": "64",
"name": "GPIO33",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_4 with input enabled at reset; F2 is SPI2_WP_PAD, F3 is GMAC_PHY_TXEN_PAD, and it is a dedicated I3C master SDA pin with configurable pull-up."
},
{
"number": "65",
"name": "GPIO34",
"type": "bidirectional",
"description": "Strapping IO pin powered by VDD_IO_4 with input enabled at reset (JTAG signal source control, floating by default); F2 is SPI2_IO4_PAD and F3 is GMAC_PHY_TXD0_PAD."
},
{
"number": "66",
"name": "GPIO35",
"type": "bidirectional",
"description": "Strapping IO pin powered by VDD_IO_4 with input enabled and weak pull-up at reset (chip boot mode control, default bit value 1); F2 is SPI2_IO5_PAD and F3 is GMAC_PHY_TXD1_PAD."
},
{
"number": "67",
"name": "VDD_PSRAM_1",
"type": "power_in",
"description": "Power input for PSRAM IO; recommended input voltage 1.65-1.95 V (typ. 1.8 V)."
},
{
"number": "68",
"name": "GPIO36",
"type": "bidirectional",
"description": "Strapping IO pin powered by VDD_IO_4 with input enabled at reset (ROM message printing control, floating by default); F2 is SPI2_IO6_PAD and F3 is GMAC_PHY_TXER_PAD."
},
{
"number": "69",
"name": "GPIO37",
"type": "bidirectional",
"description": "Strapping IO pin powered by VDD_IO_4 (chip boot mode control, floating by default); F0 is UART0_TXD and F2 is SPI2_IO7_PAD."
},
{
"number": "70",
"name": "GPIO38",
"type": "bidirectional",
"description": "Strapping IO pin powered by VDD_IO_4 with input enabled at reset (chip boot mode control, floating by default); F0 is UART0_RXD and F2 is SPI2_DQS_PAD."
},
{
"number": "71",
"name": "VDDO_FLASH",
"type": "power_out",
"description": "Regulated output supplying the off-package flash, rated up to 50 mA at maximum."
},
{
"number": "72",
"name": "VDDO_PSRAM",
"type": "power_out",
"description": "Regulated output supplying in-package and off-package PSRAM, rated up to 50 mA at maximum."
},
{
"number": "73",
"name": "VDDO_3",
"type": "power_out",
"description": "Regulated power output rated up to 50 mA at maximum."
},
{
"number": "74",
"name": "VDDO_4",
"type": "power_out",
"description": "Regulated power output rated up to 50 mA at maximum."
},
{
"number": "75",
"name": "VDD_LDO",
"type": "power_in",
"description": "Analog power domain input providing power for the LDOs; recommended input voltage 3.0-3.6 V (typ. 3.3 V)."
},
{
"number": "76",
"name": "VDD_HP_2",
"type": "power_in",
"description": "Digital power domain input for the HP core, with absolute maximum allowed input voltage of 0-1.3 V."
},
{
"number": "77",
"name": "VDD_DCDCC",
"type": "power_in",
"description": "Analog power domain input providing power for DC/DC control; recommended input voltage 3.0-3.6 V (typ. 3.3 V)."
},
{
"number": "78",
"name": "FB_DCDC",
"type": "passive",
"description": "Feedback pin of the power supply for the external DC/DC; it regulates VDD_HP_0/1/2/3 together with external feedback resistors."
},
{
"number": "79",
"name": "EN_DCDC",
"type": "output",
"description": "Enable output for the external DC/DC converter."
},
{
"number": "80",
"name": "GPIO39",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA0 and F2 is REF_50M_CLK_PAD; default drive strength 20 mA."
},
{
"number": "81",
"name": "GPIO40",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA1 and F2 is GMAC_PHY_TXEN_PAD; default drive strength 20 mA."
},
{
"number": "82",
"name": "GPIO41",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA2 and F2 is GMAC_PHY_TXD0_PAD; default drive strength 20 mA."
},
{
"number": "83",
"name": "GPIO42",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA3 and F2 is GMAC_PHY_TXD1_PAD; default drive strength 20 mA."
},
{
"number": "84",
"name": "GPIO43",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CCLK and F2 is GMAC_PHY_TXER_PAD; default drive strength 20 mA."
},
{
"number": "85",
"name": "VDD_IO_5",
"type": "power_in",
"description": "Digital power domain input for HP IO pins GPIO39-GPIO48; recommended input voltage 1.65-3.6 V (typ. 1.8 V)."
},
{
"number": "86",
"name": "GPIO44",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CCMD and F2 is GMAC_RMII_CLK_PAD; default drive strength 20 mA."
},
{
"number": "87",
"name": "GPIO45",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA4 and F2 is GMAC_PHY_RXDV_PAD; default drive strength 20 mA."
},
{
"number": "88",
"name": "GPIO46",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA5 and F2 is GMAC_PHY_RXD0_PAD; default drive strength 20 mA."
},
{
"number": "89",
"name": "GPIO47",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA6 and F2 is GMAC_PHY_RXD1_PAD; default drive strength 20 mA."
},
{
"number": "90",
"name": "GPIO48",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_5; F0 is SD1_CDATA7 and F2 is GMAC_PHY_RXER_PAD; default drive strength 20 mA."
},
{
"number": "91",
"name": "VDD_HP_3",
"type": "power_in",
"description": "Digital power domain input for the HP core, with absolute maximum allowed input voltage of 0-1.3 V."
},
{
"number": "92",
"name": "GPIO49",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_6 with analog function ADC2_CHANNEL0; F2 is GMAC_PHY_TXEN_PAD; default drive strength 20 mA."
},
{
"number": "93",
"name": "GPIO50",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_6 with analog function ADC2_CHANNEL1; F2 is GMAC_RMII_CLK_PAD; default drive strength 20 mA."
},
{
"number": "94",
"name": "GPIO51",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_6 with analog functions ADC2_CHANNEL2 and ANA_COMP0; F2 is GMAC_PHY_RXDV_PAD; default drive strength 20 mA."
},
{
"number": "95",
"name": "GPIO52",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_6 with analog functions ADC2_CHANNEL3 and ANA_COMP0; F2 is GMAC_PHY_RXD0_PAD; default drive strength 20 mA."
},
{
"number": "96",
"name": "VDD_IO_6",
"type": "power_in",
"description": "Digital power domain input for HP IO pins GPIO49-GPIO54; recommended input voltage 1.65-3.6 V (typ. 1.8 V)."
},
{
"number": "97",
"name": "GPIO53",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_6 with analog functions ADC2_CHANNEL4 and ANA_COMP1; F2 is GMAC_PHY_RXD1_PAD; default drive strength 20 mA."
},
{
"number": "98",
"name": "GPIO54",
"type": "bidirectional",
"description": "IO pin powered by VDD_IO_6 with analog functions ADC2_CHANNEL5 and ANA_COMP1; F2 is GMAC_PHY_RXER_PAD; default drive strength 20 mA."
},
{
"number": "99",
"name": "XTAL_N",
"type": "passive",
"description": "Negative external clock input/output connected to the chip's crystal or oscillator."
},
{
"number": "100",
"name": "XTAL_P",
"type": "passive",
"description": "Positive external clock input/output connected to the chip's crystal or oscillator (differential clock with XTAL_N)."
},
{
"number": "101",
"name": "VDD_ANA",
"type": "power_in",
"description": "Analog power domain input; recommended input voltage 3.0-3.6 V (typ. 3.3 V)."
},
{
"number": "102",
"name": "VDD_BAT",
"type": "power_in",
"description": "Analog power domain input that can optionally connect to an external battery; recommended input voltage 2.5-3.6 V (typ. 3.3 V)."
},
{
"number": "103",
"name": "CHIP_PU",
"type": "input",
"description": "Chip enable: High enables the chip (powered up), Low disables it (powered down); it must not be left floating."
},
{
"number": "104",
"name": "GPIO0",
"type": "bidirectional",
"description": "IO pin powered by VDD_LP/VDD_BAT with analog function XTAL_32K_N and LP_GPIO0; default drive strength 20 mA."
},
{
"number": "105",
"name": "GND",
"type": "power_in",
"description": "External ground connection (exposed pad on the QFN104 package)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package hint says '104-VFQFN Exposed Pad', but the datasheet gives the package as QFN104 (10×10 mm).; Datasheet is Pre-release v0.7 and states electrical characteristics values are preliminary and may c; Pin 9 (VDD_LP) to pin 104 (GPIO0) IO descriptions are abbreviated; the datasheet gives full IO MUX F"
],
"pages_sent": 65,
"cost_usd": 0.108,
"at": "2026-10-28T19:26:03"
},
"datasheet": {
"url": "https://www.espressif.com/sites/default/files/documentation/esp32-p4_datasheet_en.pdf",
"pages": 102,
"sha256": "fb4f3e91cc2ac519",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 105,
"described": 105,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "esp32-p4nrw32x.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.02,
10.02,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "none",
"sha256": "5998329acc7c124ea30e7af68cadaf05195c547a8b8a1218884095c644082757",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "esp32-p4nrw32x-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.02,
10.02,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "none",
"sha256": "1f1aa5c67d529b0bed842736ca3184a8d16a945b0da0972af2db3bb9e4a576cf",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Espressif Systems",
"Package": "104-VFQFN Exposed Pad",
"Category": "Integrated Circuits (ICs)",
"Pins": "105"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "fb4f3e91cc2ac519ec08cdec3dac9cb62b546cf5402ead1c5b83595a21bb6bc6",
"rows": [
{
"name": "Allowed input voltage (VDD_LDO, VDD_DCDCC, VDD_ANA, VDD_BAT, VDD_LP)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Allowed input voltage (VDD_IO_0, VDD_FLASHIO, VDD_IO_4, VDD_IO_5, VDD_IO_6)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Allowed input voltage (VDD_PSRAM_0, VDD_PSRAM_1)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": 1.62,
"typ": null,
"max": 1.98,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Allowed input voltage (VDD_HP_0, VDD_HP_1, VDD_HP_2, VDD_HP_3)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": 0,
"typ": null,
"max": 1.3,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Allowed input voltage (VDD_MIPI_DPHY)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": 0,
"typ": null,
"max": 2.75,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Allowed input voltage (VDD_USBPHY)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.66,
"typ": null,
"max": 3.96,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Cumulative IO output current",
"symbol": "Ioutput",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 1500,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Storage temperature",
"symbol": "TSTORE",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_LDO, VDD_DCDCC, VDD_ANA, VDD_LP)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": 3.3,
"max": 3.6,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_BAT)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 2.5,
"typ": 3.3,
"max": 3.6,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_IO_0, VDD_FLASHIO, VDD_IO_4, VDD_IO_5, VDD_IO_6)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 1.65,
"typ": 1.8,
"max": 3.6,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_PSRAM_0, VDD_PSRAM_1)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 1.65,
"typ": 1.8,
"max": 1.95,
"conditions": "",
"source_page": 88,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_HP_0, VDD_HP_1, VDD_HP_2, VDD_HP_3)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 0.99,
"typ": 1.1,
"max": 1.3,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_MIPI_DPHY)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 2.25,
"typ": 2.5,
"max": 2.75,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Recommended input voltage (VDD_USBPHY)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 2.97,
"typ": 3.3,
"max": 3.63,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Current supplied to core",
"symbol": "IVDD",
"kind": "recommended_operating",
"unit": "A",
"min": 0.5,
"typ": null,
"max": null,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Ambient temperature",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 85,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Low-level input voltage",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "High-level input current",
"symbol": "IIH",
"kind": "electrical",
"unit": "nA",
"min": null,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Low-level input current",
"symbol": "IIL",
"kind": "electrical",
"unit": "nA",
"min": null,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 89,
"source": "datasheet"
},
{
"name": "Chip reset voltage",
"symbol": "VIL_nRST",
"kind": "electrical",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "CHIP_PU voltage is within the specified range",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Differential nonlinearity (DNL)",
"symbol": "DNL",
"kind": "electrical",
"unit": "LSB",
"min": -1,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Integral nonlinearity (INL)",
"symbol": "INL",
"kind": "electrical",
"unit": "LSB",
"min": -5,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 90,
"source": "datasheet"
},
{
"name": "ADC sampling rate",
"symbol": "",
"kind": "electrical",
"unit": "kSPS",
"min": null,
"typ": null,
"max": 100,
"conditions": "",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Total error ATTEN0",
"symbol": "",
"kind": "tolerance",
"unit": "mV",
"min": -12,
"typ": null,
"max": 12,
"conditions": "effective measurement range of 0–1000",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Total error ATTEN1",
"symbol": "",
"kind": "tolerance",
"unit": "mV",
"min": -12,
"typ": null,
"max": 12,
"conditions": "effective measurement range of 0–1300",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Total error ATTEN2",
"symbol": "",
"kind": "tolerance",
"unit": "mV",
"min": -12,
"typ": null,
"max": 12,
"conditions": "effective measurement range of 0–1900",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Total error ATTEN3",
"symbol": "",
"kind": "tolerance",
"unit": "mV",
"min": -15,
"typ": null,
"max": 15,
"conditions": "effective measurement range of 0–3300",
"source_page": 90,
"source": "datasheet"
},
{
"name": "Power supply voltage (1.8 V PSRAM)",
"symbol": "VCC",
"kind": "recommended_operating",
"unit": "V",
"min": 1.62,
"typ": 1.8,
"max": 1.98,
"conditions": "Power supply voltage (1.8 V)",
"source_page": 92,
"source": "datasheet"
},
{
"name": "Power supply voltage (3.3 V PSRAM)",
"symbol": "VCC",
"kind": "recommended_operating",
"unit": "V",
"min": 2.7,
"typ": 3.3,
"max": 3.6,
"conditions": "Power supply voltage (3.3 V)",
"source_page": 92,
"source": "datasheet"
},
{
"name": "Maximum clock frequency (PSRAM)",
"symbol": "FC",
"kind": "timing",
"unit": "MHz",
"min": 80,
"typ": null,
"max": null,
"conditions": "Maximum clock frequency",
"source_page": 92,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"esp32-p4nrw32x"
],
"discovery_pitch": "ESP32-P4NRW32X (Espressif Systems) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"esp32-p4nrw32x.kicad_sym",
"esp32-p4nrw32x.kicad_mod",
"esp32-p4nrw32x.glb",
"esp32-p4nrw32x.step",
"esp32-p4nrw32x.lbr",
"docs/hero.png",
"docs/esp32-p4nrw32x-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"esp32-p4nrw32x-hero.glb",
"esp32-p4nrw32x-hero.overlay.json",
"esp32-p4nrw32x-etched.glb"
],
"visibility": {
"public": true
}
}