component
ESP32-C6-MINI-1-H4
Public Made by Adomby adom
Espressif Systems New Arrivals, ESP32-C6-MINI-1. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownESP32-C6-MINI-1-H4
Espressif Systems · New Arrivals · ESP32-C6-MINI-1
ESP32-C6-MINI-1-H4 from Espressif Systems, in a ESP32-C6-MINI-1. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the module. |
| 2 | GND | power_in | Ground reference pin for the module. |
| 3 | 3V3 | power_in | Module 3.3 V supply input; VDD33 recommended range is 3.0-3.3-3.6 V with absolute maximum 3.6 V, and the external supply must deliver at least 0.5 A. |
| 4 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 5 | IO2 | bidirectional | GPIO2 (I/O/T) with alternate functions LP_GPIO2, LP_UART_RTSN, ADC1_CH2 and FSPIQ. |
| 6 | IO3 | bidirectional | GPIO3 (I/O/T) with alternate functions LP_GPIO3, LP_UART_CTSN and ADC1_CH3. |
| 7 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 8 | EN | input | Chip enable input: high turns the chip on, low powers the chip off, and the pin must not be left floating. |
| 9 | IO4 | bidirectional | GPIO4 (I/O/T) also MTMS, a strapping pin by default floating, with alternate functions LP_GPIO4, LP_UART_RXD, ADC1_CH4 and FSPIHD. |
| 10 | IO5 | bidirectional | GPIO5 (I/O/T) also MTDI, a strapping pin by default floating, with alternate functions LP_GPIO5, LP_UART_TXD, ADC1_CH5 and FSPIWP. |
| 11 | GND | power_in | Ground reference pin for the module. |
| 12 | IO0 | bidirectional | GPIO0 (I/O/T) with alternate functions XTAL_32K_P, LP_GPIO0, LP_UART_DTRN and ADC1_CH0. |
| 13 | IO1 | bidirectional | GPIO1 (I/O/T) with alternate functions XTAL_32K_N, LP_GPIO1, LP_UART_DSRN and ADC1_CH1. |
| 14 | GND | power_in | Ground reference pin for the module. |
| 15 | IO6 | bidirectional | GPIO6 (I/O/T) also MTCK, with alternate functions LP_GPIO6, LP_I2C_SDA, ADC1_CH6 and FSPICLK. |
| 16 | IO7 | bidirectional | GPIO7 (I/O/T) also MTDO, with alternate functions LP_GPIO7, LP_I2C_SCL and FSPID. |
| 17 | IO12 | bidirectional | GPIO12 (I/O/T) with alternate function USB_D- (USB data line; extracted text is truncated, read as USB_D-). |
| 18 | IO13 | bidirectional | GPIO13 (I/O/T) with alternate function USB_D+. |
| 19 | IO14 | bidirectional | GPIO14 (I/O/T), general-purpose I/O. |
| 20 | IO15 | bidirectional | GPIO15 (I/O/T), also the JTAG signal source strapping pin, floating by default. |
| 21 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 22 | IO8 | bidirectional | GPIO8 (I/O/T), also a chip boot and ROM message printing strapping pin, floating by default. |
| 23 | IO9 | bidirectional | GPIO9 (I/O/T), also the chip boot mode strapping pin, with a weak pull-up by default (bit value 1). |
| 24 | IO18 | bidirectional | GPIO18 (I/O/T) with alternate functions SDIO_CMD and FSPICS2. |
| 25 | IO19 | bidirectional | GPIO19 (I/O/T) with alternate functions SDIO_CLK and FSPICS3. |
| 26 | IO20 | bidirectional | GPIO20 (I/O/T) with alternate functions SDIO_DATA0 and FSPICS4. |
| 27 | IO21 | bidirectional | GPIO21 (I/O/T) with alternate functions SDIO_DATA1 and FSPICS5. |
| 28 | IO22 | bidirectional | GPIO22 (I/O/T) with alternate function SDIO_DATA2. |
| 29 | IO23 | bidirectional | GPIO23 (I/O/T) with alternate function SDIO_DATA3. |
| 30 | RXD0 | bidirectional | U0RXD (UART0 receive) also GPIO17 and FSPICS1 (I/O/T). |
| 31 | TXD0 | bidirectional | U0TXD (UART0 transmit) also GPIO16 and FSPICS0 (I/O/T). |
| 32 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 33 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 34 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 35 | NC | unconnected | Not connected (NC) per Table 3-1. |
| 36 | GND | power_in | Ground reference pin for the module. |
| 37 | GND | power_in | Ground reference pin for the module. |
| 38 | GND | power_in | Ground reference pin for the module. |
| 39 | GND | power_in | Ground reference pin for the module. |
| 40 | GND | power_in | Ground reference pin for the module. |
| 41 | GND | power_in | Ground reference pin for the module. |
| 42 | GND | power_in | Ground reference pin for the module. |
| 43 | GND | power_in | Ground reference pin for the module. |
| 44 | GND | power_in | Ground reference pin for the module. |
| 45 | GND | power_in | Ground reference pin for the module. |
| 46 | GND | power_in | Ground reference pin for the module. |
| 47 | GND | power_in | Ground reference pin for the module. |
| 48 | GND | power_in | Ground reference pin for the module. |
| 49 | GND | power_in | Ground reference pad; soldering it to base-board ground is optional but improves thermal performance, and excess solder paste can degrade the adhesion of other pins. |
| 50 | GND | power_in | Ground reference pin for the module. |
| 51 | GND | power_in | Ground reference pin for the module. |
| 52 | GND | power_in | Ground reference pin for the module. |
| 53 | GND | power_in | Ground reference pin for the module. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | ESP32-C6-MINI-1 |
| Category | Others |
| Pins | 53 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 26 | ||
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | 26 | |
| Current delivered by external power supply | IVDD | 0.5 | A | 26 | |||
| Operating ambient temperature | TA | -40 | 105 | °C | 105 °C version | 26 | |
| High-level input current | IIH | 50 | nA | 26 | |||
| Low-level input current | IIL | 50 | nA | 26 | |||
| Power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 28 | |
| Maximum clock frequency | FC | 80 | MHz | 28 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | THERMOPLASTIC | HOUSING MATERIAL: THERMOPLASTIC, WHITE, UL 94V-0; | 42 | |
| contacts | COPPER ALLOY | gold | CONTACT MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 42 |
| shell | COPPER ALLOY | gold | SHELL MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 42 |
CAD (KiCad official)
- Symbol:
ESP32-C6-MINI-1-H4 - Footprint:
PCM_Espressif:ESP32-C6-MINI-1 - 3D model: ESP32-C6-MINI-1 (KiCad packages3D, STEP)
- 3D model files:
esp32-c6-mini-1-h4-etched.step/esp32-c6-mini-1-h4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c6-mini-1-h4.step/esp32-c6-mini-1-h4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (53 pp, sha256
26691033f31cbebf, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).