component
ESP32-C5HF4
Public Made by Adomby adom
Espressif Systems Microcontrollers (MCU/MPU/SOC), QFN-48(6x6). Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
ESP32-C5HF4
Espressif Systems · Microcontrollers (MCU/MPU/SOC) · QFN-48(6x6)
ESP32-C5HF4 from Espressif Systems, in a QFN-48(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDA6 | power_in | Analog power domain supply input, 3.3 V. |
| 2 | GND | power_in | External ground connection. |
| 3 | VDDA7 | power_in | Analog power domain supply input, 3.3 V. |
| 4 | XTAL_N | passive | External clock input/output connected to the crystal or oscillator, differential negative. |
| 5 | XTAL_P | passive | External clock input/output connected to the crystal or oscillator, differential positive. |
| 6 | VDDA8 | power_in | Analog power domain supply input, 3.3 V. |
| 7 | CHIP_PU | input | Chip enable powered by VDDPST1: high powers up the chip, low powers it down (reset), and it must not be left floating. |
| 8 | VDDPST1 | power_in | Power supply input for the LP digital power domain and LP IO pins. |
| 9 | XTAL_32K_P | bidirectional | IO powered by VDDPST1 with HP IO MUX (GPIO0), LP IO MUX (LP_UART_DTRN, LP_GPIO0) and analog function XTAL_32K_P. |
| 10 | XTAL_32K_N | bidirectional | IO powered by VDDPST1 with HP IO MUX (GPIO1), LP IO MUX (LP_UART_DSRN, LP_GPIO1) and analog functions XTAL_32K_N and ADC1_CH0. |
| 11 | MTMS | bidirectional | IO powered by VDDPST1 with JTAG MTMS, GPIO2, FSPIQ, LP_UART_RTSN, LP_I2C_SDA and ADC1_CH1; strapping pin, input enabled at reset. |
| 12 | MTDI | bidirectional | IO powered by VDDPST1 with JTAG MTDI, GPIO3, LP_UART_CTSN, LP_I2C_SCL and ADC1_CH2; strapping pin for SDIO sampling/driving clock edge, input enabled at reset. |
| 13 | MTCK | bidirectional | IO powered by VDDPST1 with JTAG MTCK, GPIO4, FSPIHD, LP_UART_RXD and ADC1_CH3; input enabled with weak pull-up at reset. |
| 14 | MTDO | bidirectional | IO powered by VDDPST1 with JTAG MTDO, GPIO5, FSPIWP, LP_UART_TXD and ADC1_CH4; input enabled at reset. |
| 15 | GPIO6 | bidirectional | IO powered by VDDPST1 with GPIO6, FSPICLK, LP_GPIO6 and ADC1_CH5; input enabled at reset. |
| 16 | GPIO7 | bidirectional | IO powered by VDDPST1 with GPIO7, SDIO_DATA1 and FSPID; strapping pin for JTAG signal source. |
| 17 | GPIO8 | bidirectional | IO powered by VDDPST1 with GPIO8, SDIO_DATA0 and analog function PAD_COMP0. |
| 18 | GPIO9 | bidirectional | IO powered by VDDPST1 with GPIO9, SDIO_CLK and analog function PAD_COMP1. |
| 19 | GPIO10 | bidirectional | IO powered by VDDPST1 with GPIO10, SDIO_CMD and FSPICS0. |
| 20 | U0TXD | bidirectional | UART0 transmit data (GPIO11) powered by VDDPST1; input and output enabled at reset. |
| 21 | U0RXD | bidirectional | UART0 receive data (GPIO12) powered by VDDPST1; input enabled with weak pull-up at reset. |
| 22 | GPIO13 | bidirectional | IO powered by VDDPST2 with GPIO13, USB_D- and SDIO_DATA3; default drive strength 40 mA. |
| 23 | GPIO14 | bidirectional | IO powered by VDDPST2 with GPIO14, USB_D+ and SDIO_DATA2; default drive strength 40 mA and USB pull-up enabled by default. |
| 24 | VDDPST2 | power_in | Power supply input for the HP digital and part of the analog pin power domains (HP IO). |
| 25 | SPICS1 | bidirectional | IO (GPIO15, SPICS1) powered from the VDD_SPI rail; input enabled with weak pull-up at and after reset. |
| 26 | NC | unconnected | Not connected on ESP32-C5HF4 (SPICS0 on other variants). |
| 27 | NC | unconnected | Not connected on ESP32-C5HF4 (SPIQ on other variants). |
| 28 | NC | unconnected | Not connected on ESP32-C5HF4 (SPIWP on other variants). |
| 29 | NC | unconnected | Not connected on ESP32-C5HF4 (VDD_SPI on other variants). |
| 30 | NC | unconnected | Not connected on ESP32-C5HF4 (SPIHD on other variants). |
| 31 | NC | unconnected | Not connected on ESP32-C5HF4 (SPICLK on other variants). |
| 32 | NC | unconnected | Not connected on ESP32-C5HF4 (SPID on other variants). |
| 33 | GPIO23 | bidirectional | IO powered by VDDPST3 with GPIO23; input enabled at reset. |
| 34 | GPIO24 | bidirectional | IO powered by VDDPST3 with GPIO24; input enabled at reset. |
| 35 | GPIO25 | bidirectional | IO powered by VDDPST3 with GPIO25; strapping pin for SDIO sampling/driving clock edge. |
| 36 | GPIO26 | bidirectional | IO powered by VDDPST3 with GPIO26; strapping pin for chip boot mode. |
| 37 | GPIO27 | bidirectional | IO powered by VDDPST3 with GPIO27; strapping pin for chip boot mode and ROM message printing, default pull-up. |
| 38 | GPIO28 | bidirectional | IO powered by VDDPST3 with GPIO28; strapping pin for chip boot mode, default pull-up. |
| 39 | VDDPST3 | power_in | Power supply input for the HP digital power domain (HP IO). |
| 40 | VDDA1 | power_in | Analog power domain supply input, 3.3 V. |
| 41 | VDDA2 | power_in | Analog power domain supply input, 3.3 V. |
| 42 | ANT_2G | bidirectional | 2.4 GHz RF input/output. |
| 43 | GND | power_in | External ground connection. |
| 44 | VDDA3 | power_in | Analog power domain supply input, 3.3 V. |
| 45 | VDDA4 | power_in | Analog power domain supply input, 3.3 V. |
| 46 | VDDA5 | power_in | Analog power domain supply input, 3.3 V. |
| 47 | GND | power_in | External ground connection. |
| 48 | ANT_5G | bidirectional | 5 GHz RF input/output. |
| 49 | GND | power_in | Exposed ground pad shown as pin 49 in the ESP32-C5HF4 pin layout. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-48(6x6) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input power pins allowed input voltage | -0.3 | 3.6 | V | 70 | |||
| Storage temperature | TSTORE | -40 | 150 | °C | 70 | ||
| Recommended input voltage (VDDA1-VDDA8) | 3 | 3.3 | 3.6 | V | 70 | ||
| Recommended input voltage (VDDPST1, VDDPST3) | 3 | 3.3 | 3.6 | V | 70 | ||
| Recommended input voltage (VDD_SPI as input) | 3 | 3.3 | 3.6 | V | 70 | ||
| Recommended input voltage (VDDPST2) | 3 | 3.3 | 3.6 | V | 70 | ||
| Cumulative input current | IVDD | 0.6 | A | 70 | |||
| Ambient temperature (recommended range, H variant) | -40 | 105 | °C | 14 | |||
| Low-level input voltage | VIL | -0.3 | V | 71 | |||
| High-level input current | IIH | 50 | nA | 71 | |||
| Low-level input current | IIL | 50 | nA | 71 | |||
| Chip reset voltage (CHIP_PU voltage is within the specified range) | VIL_nRST | -0.3 | V | 71 | |||
| DNL (Differential nonlinearity) | DNL | -5 | 5 | LSB | 72 | ||
| INL (Integral nonlinearity) | INL | -5 | 5 | LSB | 72 | ||
| Sampling rate | 2000 | kSPS | 72 | ||||
| Total error | -10 | 10 | mV | ATTEN0, effective measurement range of 0 ~ 1000 | 72 | ||
| Total error | -12 | 12 | mV | ATTEN2, effective measurement range of 0 ~ 1900 | 72 | ||
| Total error | -15 | 15 | mV | ATTEN3, effective measurement range of 0 ~ 3300 | 72 | ||
| Power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | 74 | |
| Power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 74 | |
| Maximum clock frequency | FC | 80 | MHz | 75 | |||
| Program/erase cycles | 100000 | cycles | 75 | ||||
| Data retention time | TRET | 20 | years | 75 | |||
| Page program time | TPP | 0.8 | 5 | ms | 75 | ||
| Sector erase time (4 KB) | TSE | 70 | 500 | ms | 75 | ||
| Block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 75 | ||
| Block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 75 | ||
| Chip erase time (16 Mb) | TCE | 7 | 20 | s | 75 | ||
| Chip erase time (32 Mb) | TCE | 20 | 60 | s | 75 | ||
| Chip erase time (64 Mb) | TCE | 25 | 100 | s | 75 | ||
| Chip erase time (128 Mb) | TCE | 60 | 200 | s | 75 | ||
| Chip erase time (256 Mb) | TCE | 70 | 300 | s | 75 |
CAD (KiCad official)
- Symbol:
ESP32-C5HF4 - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm - 3D model: QFN-48(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
esp32-c5hf4-etched.step/esp32-c5hf4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c5hf4.step/esp32-c5hf4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (96 pp, sha256
e3cb7ad57b6fdf16, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).