component
ESP32-C5-WROOM-1-N8R8
Public Made by Adomby adom
Espressif Systems WiFi Modules, ESP32-C5-WROOM-1. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20251024
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| esp32-c5-wroom-1-n8r8-etched.glb | 7d ago |
| esp32-c5-wroom-1-n8r8-etched.step | 7d ago |
| esp32-c5-wroom-1-n8r8.glb | 7d ago |
| esp32-c5-wroom-1-n8r8.kicad_mod | 7d ago |
| esp32-c5-wroom-1-n8r8.kicad_sym | 7d ago |
| esp32-c5-wroom-1-n8r8.lbr | 7d ago |
| esp32-c5-wroom-1-n8r8.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
ESP32-C5-WROOM-1-N8R8
Espressif Systems · WiFi Modules · ESP32-C5-WROOM-1
ESP32-C5-WROOM-1-N8R8 from Espressif Systems, in a ESP32-C5-WROOM-1. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin of the module. |
| 2 | 3V3 | power_in | Module power supply pin; the VDD33 operating range is 3.0 V to 3.6 V with 3.3 V typical (Table 6-2, page 32). |
| 3 | EN | input | Chip enable: high enables the chip, low powers the chip off, and the pin must not be left floating. |
| 4 | IO2 | bidirectional | GPIO2 and MTMS strapping pin (floating by default), also usable as LP_GPIO2, LP_UART_RTSN, LP_I2C_SDA, ADC1_CH1 and FSPIQ. |
| 5 | IO3 | bidirectional | GPIO3 and MTDI strapping pin (floating by default), also usable as LP_GPIO3, LP_UART_CTSN, LP_I2C_SCL and ADC1_CH2. |
| 6 | IO0 | bidirectional | GPIO0, also usable as XTAL_32K_P, LP_GPIO0 and LP_UART_DTRN. |
| 7 | IO1 | bidirectional | GPIO1, also usable as XTAL_32K_N, LP_GPIO1, LP_UART_DSRN and ADC1_CH0. |
| 8 | IO6 | bidirectional | GPIO6, also usable as LP_GPIO6, ADC1_CH5 and FSPICLK. |
| 9 | IO7 | bidirectional | GPIO7, also usable as FSPID and SDIO_DATA1; it is a strapping pin for the JTAG signal source and floats by default. |
| 10 | IO8 | bidirectional | GPIO8, also usable as PAD_COMP0 and SDIO_DATA0. |
| 11 | IO9 | bidirectional | GPIO9, also usable as PAD_COMP1 and SDIO_CLK. |
| 12 | IO10 | bidirectional | GPIO10, also usable as FSPICS0 and SDIO_CMD. |
| 13 | IO13 | bidirectional | GPIO13, also usable as USB_D- and SDIO_DATA3. |
| 14 | IO14 | bidirectional | GPIO14, also usable as USB_D+ and SDIO_DATA2. |
| 15 | IO28 | bidirectional | GPIO28, a boot-mode strapping pin with an internal pull-up (default logic 1). |
| 16 | IO5 | bidirectional | MTDO and GPIO5, also usable as LP_GPIO5, LP_UART_TXD, ADC1_CH4 and FSPIWP. |
| 17 | IO4 | bidirectional | MTCK and GPIO4, also usable as LP_GPIO4, LP_UART_RXD, ADC1_CH3 and FSPIHD. |
| 18 | IO27 | bidirectional | GPIO27, a boot-mode and ROM message printing strapping pin with an internal pull-up (default logic 1). |
| 19 | NC/IO15 | bidirectional | Used as SPICS1 and unavailable for other functions when the module has in-package SPI PSRAM; otherwise usable as GPIO15. |
| 20 | NC | unconnected | Not connected. |
| 21 | IO23 | bidirectional | GPIO23. |
| 22 | NC | unconnected | Not connected. |
| 23 | IO24 | bidirectional | GPIO24. |
| 24 | RX0 | bidirectional | U0RXD, UART0 receive, also usable as GPIO12. |
| 25 | TX0 | bidirectional | U0TXD, UART0 transmit, also usable as GPIO11. |
| 26 | IO25 | bidirectional | GPIO25, a strapping pin for SDIO sampling and driving clock edge control (floating by default). |
| 27 | IO26 | bidirectional | GPIO26, a chip boot-mode strapping pin (floating by default). |
| 28 | GND | power_in | Ground pin. |
| 29 | EPAD | power_in | Exposed ground pad of the module. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | ESP32-C5-WROOM-1 |
| Category | IoT/Communication Modules |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 32 | ||
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | 32 | |
| Current delivered by external power supply | IV DD | 0.6 | A | 32 | |||
| Operating ambient temperature | TA | -40 | 85 | °C | 32 | ||
| High-level input current | IIH | 50 | nA | 32 | |||
| Low-level input current | IIL | 50 | nA | 32 | |||
| Flash power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | 35 | |
| Flash power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 35 | |
| Flash maximum clock frequency | FC | 80 | MHz | 35 | |||
| Flash program/erase cycles | 100000 | cycles | 35 | ||||
| Flash data retention time | TRET | 20 | years | 35 | |||
| Flash page program time | TPP | 0.8 | 5 | ms | 35 | ||
| Flash sector erase time (4 KB) | TSE | 70 | 500 | ms | 35 | ||
| Flash block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 35 | ||
| Flash block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 35 | ||
| Flash chip erase time (16 Mb) | TCE | 7 | 20 | s | 35 | ||
| Flash chip erase time (32 Mb) | TCE | 20 | 60 | s | 35 | ||
| Flash chip erase time (64 Mb) | TCE | 25 | 100 | s | 35 | ||
| Flash chip erase time (128 Mb) | TCE | 60 | 200 | s | 35 | ||
| Flash chip erase time (256 Mb) | TCE | 70 | 300 | s | 35 | ||
| PSRAM power supply voltage (1.8 V) | VCC | 1.62 | 1.8 | 1.98 | V | 35 | |
| PSRAM power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 35 | |
| PSRAM maximum clock frequency | FC | 80 | MHz | 35 | |||
| RF transmit power range (802.15.4, 250 Kbps) | -15 | 20 | dBm | 46 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Solder: Sn-Ag-Cu (SAC305) lead-free solder Temperature (°C) | 56 |
CAD (KiCad official)
- Symbol:
ESP32-C5-WROOM-1-N8R8 - Footprint:
PCM_Espressif:ESP32-C5-WROOM-1 - 3D model: ESP32-C5-WROOM-1 (KiCad packages3D, STEP)
- 3D model files:
esp32-c5-wroom-1-n8r8-etched.step/esp32-c5-wroom-1-n8r8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c5-wroom-1-n8r8.step/esp32-c5-wroom-1-n8r8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (62 pp, sha256
fa50f329237226d0, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).