component
ESP32-C3
Public Made by Adomby adom
Espressif Systems Microcontrollers (MCU/MPU/SOC), QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
970ef9b
ESP32-C3
Espressif Systems · Microcontrollers (MCU/MPU/SOC) · QFN-32-EP(5x5)
ESP32-C3 from Espressif Systems, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LNA_IN | bidirectional | Low Noise Amplifier (RF LNA) input / output signals. |
| 2 | VDD3P3 | power_in | Input power supply for the analog power domain. |
| 3 | VDD3P3 | power_in | Input power supply for the analog power domain. |
| 4 | XTAL_32K_P | bidirectional | Positive 32 kHz clock signal connected to the crystal or oscillator; also GPIO0 and ADC1_CH0 function, powered by VDD3P3_RTC. |
| 5 | XTAL_32K_N | bidirectional | Negative 32 kHz clock signal for external clock input/output; also GPIO1 and ADC1_CH1 function, powered by VDD3P3_RTC. |
| 6 | GPIO2 | bidirectional | General-purpose I/O with input enabled at reset, powered by VDD3P3_RTC; a strapping pin with default drive strength 10 mA. |
| 7 | CHIP_EN | input | High enables the chip (powered up), low disables it (powered down); do not leave this pin floating. |
| 8 | GPIO3 | bidirectional | General-purpose I/O with input enabled at reset, powered by VDD3P3_RTC; default drive strength 10 mA. |
| 9 | MTMS | bidirectional | JTAG test mode select, powered by VDD3P3_RTC with default drive strength 10 mA; also GPIO4 and ADC1_CH4. |
| 10 | MTDI | bidirectional | JTAG test data in, powered by VDD3P3_RTC with default drive strength 10 mA; also GPIO5 and ADC2_CH0. |
| 11 | VDD3P3_RTC | power_in | Input power for the RTC and part of the digital power domains, supplying RTC IO. |
| 12 | MTCK | bidirectional | JTAG test clock, powered by VDD3P3_CPU; shows a 5 ns low-level glitch at power-up. |
| 13 | MTDO | bidirectional | JTAG test data out, powered by VDD3P3_CPU; shows a 5 ns low-level glitch at power-up. |
| 14 | GPIO8 | bidirectional | General-purpose I/O with input enabled, powered by VDD3P3_CPU; a strapping pin. |
| 15 | GPIO9 | bidirectional | General-purpose I/O with input enabled and internal weak pull-up at reset, powered by VDD3P3_CPU; a strapping pin. |
| 16 | GPIO10 | bidirectional | General-purpose I/O with input enabled, powered by VDD3P3_CPU; shows a 5 ns low-level glitch at power-up. |
| 17 | VDD3P3_CPU | power_in | Input power for the digital power domain, supplying digital IO. |
| 18 | VDD_SPI | power_in | Power pin for in-package flash, acting as a backup power line input and output to the flash SPI IO; it can be reconfigured as a GPIO only if the off-package flash has an external supply. |
| 19 | SPIHD | bidirectional | SPI flash hold signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 20 | SPIWP | bidirectional | SPI flash write protect signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 21 | SPICS0 | bidirectional | SPI flash chip select signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 22 | SPICLK | bidirectional | SPI flash clock signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 23 | SPID | bidirectional | SPI flash data line (master out, slave in), powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 24 | SPIQ | bidirectional | SPI flash data line (master in, slave out), powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 25 | GPIO18 | bidirectional | General-purpose I/O also used as USB_D-, powered by VDD3P3_CPU with 40 mA default drive; shows a 50000 ns high-level glitch at power-up. |
| 26 | GPIO19 | bidirectional | General-purpose I/O also used as USB_D+, powered by VDD3P3_CPU with 40 mA default drive. |
| 27 | U0RXD | bidirectional | UART0 receive data, powered by VDD3P3_CPU with input enabled and weak pull-up; shows a 5 ns low-level glitch at power-up. |
| 28 | U0TXD | bidirectional | UART0 transmit data, powered by VDD3P3_CPU with internal weak pull-up enabled and output enabled. |
| 29 | XTAL_N | passive | Negative external clock input/output connected to the chip's crystal or oscillator (differential clock negative). |
| 30 | XTAL_P | passive | Positive external clock input/output connected to the chip's crystal or oscillator (differential clock positive). |
| 31 | VDDA | power_in | Input power for the analog power domain. |
| 32 | VDDA | power_in | Input power for the analog power domain. |
| 33 | GND | power_in | External ground connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Allowed input voltage | -0.3 | 3.6 | V | Input power pins | 54 | ||
| Cumulative IO output current | 1000 | mA | 54 | ||||
| Storage temperature | -40 | 150 | °C | 54 | |||
| Recommended input voltage (VDDA, VDD3P3, VDD3P3_RTC) | 3 | 3.3 | 3.6 | V | 54 | ||
| Recommended input voltage (VDD3P3_CPU) | 3 | 3.3 | 3.6 | V | 54 | ||
| Recommended input voltage (VDD_SPI as input) | 3 | 3.3 | 3.6 | V | 54 | ||
| Cumulative input current | 0.5 | A | 54 | ||||
| Low-level input voltage | VIL | -0.3 | V | 55 | |||
| High-level input current | IIH | 50 | nA | 55 | |||
| Low-level input current | IIL | 50 | nA | 55 | |||
| DNL (Differential nonlinearity) | DNL | -7 | 7 | LSB | ADC connected to an external 100 nF capacitor; DC signal input; Ambient temperature at 25 °C; Wi-Fi off | 56 | |
| INL (Integral nonlinearity) | INL | -12 | 12 | LSB | ADC connected to an external 100 nF capacitor; DC signal input; Ambient temperature at 25 °C; Wi-Fi off | 56 | |
| Sampling rate | 100 | kSPS | 56 | ||||
| Total error | -10 | 10 | mV | ATTEN0, effective measurement range of 0 ~ 750 | 56 | ||
| Total error | -35 | 35 | mV | ATTEN3, effective measurement range of 0 ~ 2500 | 56 | ||
| Power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | Flash specification | 57 |
| Power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | Flash specification | 57 |
| Maximum clock frequency | FC | 80 | MHz | Flash specification | 57 | ||
| Program/erase cycles | 100000 | cycles | Flash specification | 57 | |||
| Data retention time | TRET | 20 | years | Flash specification | 57 | ||
| Page program time | TPP | 0.8 | 5 | ms | Flash specification | 57 | |
| Sector erase time (4 KB) | TSE | 70 | 500 | ms | Flash specification | 57 | |
| Block erase time (32 KB) | TBE1 | 0.2 | 2 | s | Flash specification | 57 | |
| Block erase time (64 KB) | TBE2 | 0.3 | 3 | s | Flash specification | 57 | |
| Chip erase time (16 Mb) | TCE | 7 | 20 | s | Chip erase time (16 Mb) | 57 | |
| Chip erase time (32 Mb) | TCE | 20 | 60 | s | Chip erase time (32 Mb) | 57 | |
| Chip erase time (64 Mb) | TCE | 25 | 100 | s | Chip erase time (64 Mb) | 57 | |
| Chip erase time (128 Mb) | TCE | 60 | 200 | s | Chip erase time (128 Mb) | 58 | |
| Chip erase time (256 Mb) | TCE | 70 | 300 | s | Chip erase time (256 Mb) | 58 | |
| ESD HBM (Human Body Model) | -2000 | 2000 | V | HBM (Human Body Mode) | 58 | ||
| ESD CDM (Charge Device Model) | -1000 | 1000 | V | CDM (Charge Device Mode) | 58 | ||
| Latch up current trigger | -200 | 200 | mA | Current trigger | 58 | ||
| Center frequency of operating channel (Wi-Fi) | 2412 | 2484 | MHz | Center frequency of operating channel | 59 | ||
| Center frequency of operating channel (Bluetooth LE) | 2402 | 2480 | MHz | Center frequency of operating channel | 61 | ||
| RF power control range (Bluetooth LE) | -24 | 0 | 20 | dBm | 61 | ||
| Temperature sensor range | -40 | 125 | °C | 50 |
CAD (KiCad official)
- Symbol:
ESP32-C3 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
esp32-c3-etched.step/esp32-c3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c3.step/esp32-c3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (76 pp, sha256
833fc000b4b3c3d3, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ESP32-C3
**Espressif Systems** · Microcontrollers (MCU/MPU/SOC) · QFN-32-EP(5x5)
ESP32-C3 from Espressif Systems, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LNA_IN | bidirectional | Low Noise Amplifier (RF LNA) input / output signals. |
| 2 | VDD3P3 | power_in | Input power supply for the analog power domain. |
| 3 | VDD3P3 | power_in | Input power supply for the analog power domain. |
| 4 | XTAL_32K_P | bidirectional | Positive 32 kHz clock signal connected to the crystal or oscillator; also GPIO0 and ADC1_CH0 function, powered by VDD3P3_RTC. |
| 5 | XTAL_32K_N | bidirectional | Negative 32 kHz clock signal for external clock input/output; also GPIO1 and ADC1_CH1 function, powered by VDD3P3_RTC. |
| 6 | GPIO2 | bidirectional | General-purpose I/O with input enabled at reset, powered by VDD3P3_RTC; a strapping pin with default drive strength 10 mA. |
| 7 | CHIP_EN | input | High enables the chip (powered up), low disables it (powered down); do not leave this pin floating. |
| 8 | GPIO3 | bidirectional | General-purpose I/O with input enabled at reset, powered by VDD3P3_RTC; default drive strength 10 mA. |
| 9 | MTMS | bidirectional | JTAG test mode select, powered by VDD3P3_RTC with default drive strength 10 mA; also GPIO4 and ADC1_CH4. |
| 10 | MTDI | bidirectional | JTAG test data in, powered by VDD3P3_RTC with default drive strength 10 mA; also GPIO5 and ADC2_CH0. |
| 11 | VDD3P3_RTC | power_in | Input power for the RTC and part of the digital power domains, supplying RTC IO. |
| 12 | MTCK | bidirectional | JTAG test clock, powered by VDD3P3_CPU; shows a 5 ns low-level glitch at power-up. |
| 13 | MTDO | bidirectional | JTAG test data out, powered by VDD3P3_CPU; shows a 5 ns low-level glitch at power-up. |
| 14 | GPIO8 | bidirectional | General-purpose I/O with input enabled, powered by VDD3P3_CPU; a strapping pin. |
| 15 | GPIO9 | bidirectional | General-purpose I/O with input enabled and internal weak pull-up at reset, powered by VDD3P3_CPU; a strapping pin. |
| 16 | GPIO10 | bidirectional | General-purpose I/O with input enabled, powered by VDD3P3_CPU; shows a 5 ns low-level glitch at power-up. |
| 17 | VDD3P3_CPU | power_in | Input power for the digital power domain, supplying digital IO. |
| 18 | VDD_SPI | power_in | Power pin for in-package flash, acting as a backup power line input and output to the flash SPI IO; it can be reconfigured as a GPIO only if the off-package flash has an external supply. |
| 19 | SPIHD | bidirectional | SPI flash hold signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 20 | SPIWP | bidirectional | SPI flash write protect signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 21 | SPICS0 | bidirectional | SPI flash chip select signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 22 | SPICLK | bidirectional | SPI flash clock signal, powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 23 | SPID | bidirectional | SPI flash data line (master out, slave in), powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 24 | SPIQ | bidirectional | SPI flash data line (master in, slave out), powered by VDD_SPI or VDD3P3_CPU with internal weak pull-up enabled. |
| 25 | GPIO18 | bidirectional | General-purpose I/O also used as USB_D-, powered by VDD3P3_CPU with 40 mA default drive; shows a 50000 ns high-level glitch at power-up. |
| 26 | GPIO19 | bidirectional | General-purpose I/O also used as USB_D+, powered by VDD3P3_CPU with 40 mA default drive. |
| 27 | U0RXD | bidirectional | UART0 receive data, powered by VDD3P3_CPU with input enabled and weak pull-up; shows a 5 ns low-level glitch at power-up. |
| 28 | U0TXD | bidirectional | UART0 transmit data, powered by VDD3P3_CPU with internal weak pull-up enabled and output enabled. |
| 29 | XTAL_N | passive | Negative external clock input/output connected to the chip's crystal or oscillator (differential clock negative). |
| 30 | XTAL_P | passive | Positive external clock input/output connected to the chip's crystal or oscillator (differential clock positive). |
| 31 | VDDA | power_in | Input power for the analog power domain. |
| 32 | VDDA | power_in | Input power for the analog power domain. |
| 33 | GND | power_in | External ground connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Allowed input voltage | | -0.3 | | 3.6 | V | Input power pins | 54 |
| Cumulative IO output current | | | | 1000 | mA | | 54 |
| Storage temperature | | -40 | | 150 | °C | | 54 |
| Recommended input voltage (VDDA, VDD3P3, VDD3P3_RTC) | | 3 | 3.3 | 3.6 | V | | 54 |
| Recommended input voltage (VDD3P3_CPU) | | 3 | 3.3 | 3.6 | V | | 54 |
| Recommended input voltage (VDD_SPI as input) | | 3 | 3.3 | 3.6 | V | | 54 |
| Cumulative input current | | 0.5 | | | A | | 54 |
| Low-level input voltage | VIL | -0.3 | | | V | | 55 |
| High-level input current | IIH | | | 50 | nA | | 55 |
| Low-level input current | IIL | | | 50 | nA | | 55 |
| DNL (Differential nonlinearity) | DNL | -7 | | 7 | LSB | ADC connected to an external 100 nF capacitor; DC signal input; Ambient temperature at 25 °C; Wi-Fi off | 56 |
| INL (Integral nonlinearity) | INL | -12 | | 12 | LSB | ADC connected to an external 100 nF capacitor; DC signal input; Ambient temperature at 25 °C; Wi-Fi off | 56 |
| Sampling rate | | | | 100 | kSPS | | 56 |
| Total error | | -10 | | 10 | mV | ATTEN0, effective measurement range of 0 ~ 750 | 56 |
| Total error | | -35 | | 35 | mV | ATTEN3, effective measurement range of 0 ~ 2500 | 56 |
| Power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | Flash specification | 57 |
| Power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | Flash specification | 57 |
| Maximum clock frequency | FC | 80 | | | MHz | Flash specification | 57 |
| Program/erase cycles | | 100000 | | | cycles | Flash specification | 57 |
| Data retention time | TRET | 20 | | | years | Flash specification | 57 |
| Page program time | TPP | | 0.8 | 5 | ms | Flash specification | 57 |
| Sector erase time (4 KB) | TSE | | 70 | 500 | ms | Flash specification | 57 |
| Block erase time (32 KB) | TBE1 | | 0.2 | 2 | s | Flash specification | 57 |
| Block erase time (64 KB) | TBE2 | | 0.3 | 3 | s | Flash specification | 57 |
| Chip erase time (16 Mb) | TCE | | 7 | 20 | s | Chip erase time (16 Mb) | 57 |
| Chip erase time (32 Mb) | TCE | | 20 | 60 | s | Chip erase time (32 Mb) | 57 |
| Chip erase time (64 Mb) | TCE | | 25 | 100 | s | Chip erase time (64 Mb) | 57 |
| Chip erase time (128 Mb) | TCE | | 60 | 200 | s | Chip erase time (128 Mb) | 58 |
| Chip erase time (256 Mb) | TCE | | 70 | 300 | s | Chip erase time (256 Mb) | 58 |
| ESD HBM (Human Body Model) | | -2000 | | 2000 | V | HBM (Human Body Mode) | 58 |
| ESD CDM (Charge Device Model) | | -1000 | | 1000 | V | CDM (Charge Device Mode) | 58 |
| Latch up current trigger | | -200 | | 200 | mA | Current trigger | 58 |
| Center frequency of operating channel (Wi-Fi) | | 2412 | | 2484 | MHz | Center frequency of operating channel | 59 |
| Center frequency of operating channel (Bluetooth LE) | | 2402 | | 2480 | MHz | Center frequency of operating channel | 61 |
| RF power control range (Bluetooth LE) | | -24 | 0 | 20 | dBm | | 61 |
| Temperature sensor range | | -40 | | 125 | °C | | 50 |
## CAD (KiCad official)
- Symbol: `ESP32-C3`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm`
- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `esp32-c3-etched.step` / `esp32-c3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esp32-c3.step` / `esp32-c3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Espressif Systems datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf) (76 pp, sha256 `833fc000b4b3c3d3`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/esp32-c3-datasheet.pdf)