main
Ray
esp32-c3-mini-1-h4-es: CAD wording names Espressif's KiCad libraries, not KiCad official
088ebea
ESP32-C3-MINI-1-H4-ES
Espressif Systems · RF and Wireless · Module
ESP32-C3-MINI-1-H4-ES from Espressif Systems, in a Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the module. |
| 2 | GND | power_in | Ground pin of the module. |
| 3 | 3V3 | power_in | Module power supply input; the operating voltage range is 3.0 ~ 3.6 V. |
| 4 | NC | unconnected | Not connected on the module. |
| 5 | IO2 | bidirectional | GPIO2, ADC1_CH2, FSPIQ; strapping pin that controls chip boot mode, and the datasheet recommends pulling it up due to glitches. |
| 6 | IO3 | bidirectional | GPIO3, ADC1_CH3. |
| 7 | NC | unconnected | Not connected on the module. |
| 8 | EN | input | High: on, enables the chip. Low: off, the chip powers off. Do not leave the EN pin floating. |
| 9 | NC | unconnected | Not connected on the module. |
| 10 | NC | unconnected | Not connected on the module. |
| 11 | GND | power_in | Ground pin of the module. |
| 12 | IO0 | bidirectional | GPIO0, ADC1_CH0, XTAL_32K_P. |
| 13 | IO1 | bidirectional | GPIO1, ADC1_CH1, XTAL_32K_N. |
| 14 | GND | power_in | Ground pin of the module. |
| 15 | NC | unconnected | Not connected on the module. |
| 16 | IO10 | bidirectional | GPIO10, FSPICS0. |
| 17 | NC | unconnected | Not connected on the module. |
| 18 | IO4 | bidirectional | GPIO4, ADC1_CH4, FSPIHD, MTMS. |
| 19 | IO5 | bidirectional | GPIO5, ADC2_CH0, FSPIWP, MTDI. |
| 20 | IO6 | bidirectional | GPIO6, FSPICLK, MTCK. |
| 21 | IO7 | bidirectional | GPIO7, FSPID, MTDO. |
| 22 | IO8 | bidirectional | GPIO8; strapping pin that controls boot mode and ROM message printing. |
| 23 | IO9 | bidirectional | GPIO9; strapping pin that controls chip boot mode, with a weak pull-up at reset. |
| 24 | NC | unconnected | Not connected on the module. |
| 25 | NC | unconnected | Not connected on the module. |
| 26 | IO18 | bidirectional | GPIO18, USB_D-. |
| 27 | IO19 | bidirectional | GPIO19, USB_D+. |
| 28 | NC | unconnected | Not connected on the module. |
| 29 | NC | unconnected | Not connected on the module. |
| 30 | RXD0 | bidirectional | GPIO20, U0RXD (UART0 receive). |
| 31 | TXD0 | bidirectional | GPIO21, U0TXD (UART0 transmit). |
| 32 | NC | unconnected | Not connected on the module. |
| 33 | NC | unconnected | Not connected on the module. |
| 34 | NC | unconnected | Not connected on the module. |
| 35 | NC | unconnected | Not connected on the module. |
| 36 | GND | power_in | Ground pin of the module. |
| 37 | GND | power_in | Ground pin of the module. |
| 38 | GND | power_in | Ground pin of the module. |
| 39 | GND | power_in | Ground pin of the module. |
| 40 | GND | power_in | Ground pin of the module. |
| 41 | GND | power_in | Ground pin of the module. |
| 42 | GND | power_in | Ground pin of the module. |
| 43 | GND | power_in | Ground pin of the module. |
| 44 | GND | power_in | Ground pin of the module. |
| 45 | GND | power_in | Ground pin of the module. |
| 46 | GND | power_in | Ground pin of the module. |
| 47 | GND | power_in | Ground pin of the module. |
| 48 | GND | power_in | Ground pin of the module. |
| 49 | GND | power_in | Ground pin of the module (EPAD thermal pad); soldering it to the base board is optional but improves thermal performance. |
| 50 | GND | power_in | Ground pin of the module. |
| 51 | GND | power_in | Ground pin of the module. |
| 52 | GND | power_in | Ground pin of the module. |
| 53 | GND | power_in | Ground pin of the module. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | Module |
| Category | RF and Wireless |
| Pins | 53 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 21 | ||
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | 21 | |
| Current delivered by external power supply | IVDD | 0.5 | A | 21 | |||
| Operating ambient temperature | TA | -40 | 105 | °C | 105 °C version module | 21 | |
| High-level input current | IIH | 50 | nA | 21 | |||
| Low-level input current | IIL | 50 | nA | 21 | |||
| Power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | Flash, power supply voltage (1.8 V) | 23 |
| Power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | Flash, power supply voltage (3.3 V) | 23 |
| Maximum clock frequency | FC | 80 | MHz | Flash | 23 | ||
| Data retention time | TRET | 20 | years | Flash | 23 | ||
| Page program time | TPP | 0.8 | 5 | ms | Flash | 23 | |
| Sector erase time (4 KB) | TSE | 70 | 500 | ms | Flash | 23 | |
| Block erase time (32 KB) | TBE1 | 0.2 | 2 | s | Flash | 23 | |
| Block erase time (64 KB) | TBE2 | 0.3 | 3 | s | Flash | 23 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | THERMOPLASTIC | HOUSING MATERIAL: THERMOPLASTIC, WHITE, UL 94V-0; | 36 | |
| contacts | COPPER ALLOY | gold | CONTACT MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 36 |
| shell | COPPER ALLOY | gold | SHELL MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 36 |
CAD (land: Espressif; 3D: manufacturer)
- Symbol:
ESP32-C3-MINI-1-H4-ES - Footprint:
PCM_Espressif:ESP32-C3-MINI-1 - 3D model: Module (Espressif KiCad libraries, STEP)
- 3D model files:
esp32-c3-mini-1-h4-es-etched.step/esp32-c3-mini-1-h4-es-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c3-mini-1-h4-es.step/esp32-c3-mini-1-h4-es.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (48 pp, sha256
b53790a43866afb4, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.
# ESP32-C3-MINI-1-H4-ES
**Espressif Systems** · RF and Wireless · Module
ESP32-C3-MINI-1-H4-ES from Espressif Systems, in a Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the module. |
| 2 | GND | power_in | Ground pin of the module. |
| 3 | 3V3 | power_in | Module power supply input; the operating voltage range is 3.0 ~ 3.6 V. |
| 4 | NC | unconnected | Not connected on the module. |
| 5 | IO2 | bidirectional | GPIO2, ADC1_CH2, FSPIQ; strapping pin that controls chip boot mode, and the datasheet recommends pulling it up due to glitches. |
| 6 | IO3 | bidirectional | GPIO3, ADC1_CH3. |
| 7 | NC | unconnected | Not connected on the module. |
| 8 | EN | input | High: on, enables the chip. Low: off, the chip powers off. Do not leave the EN pin floating. |
| 9 | NC | unconnected | Not connected on the module. |
| 10 | NC | unconnected | Not connected on the module. |
| 11 | GND | power_in | Ground pin of the module. |
| 12 | IO0 | bidirectional | GPIO0, ADC1_CH0, XTAL_32K_P. |
| 13 | IO1 | bidirectional | GPIO1, ADC1_CH1, XTAL_32K_N. |
| 14 | GND | power_in | Ground pin of the module. |
| 15 | NC | unconnected | Not connected on the module. |
| 16 | IO10 | bidirectional | GPIO10, FSPICS0. |
| 17 | NC | unconnected | Not connected on the module. |
| 18 | IO4 | bidirectional | GPIO4, ADC1_CH4, FSPIHD, MTMS. |
| 19 | IO5 | bidirectional | GPIO5, ADC2_CH0, FSPIWP, MTDI. |
| 20 | IO6 | bidirectional | GPIO6, FSPICLK, MTCK. |
| 21 | IO7 | bidirectional | GPIO7, FSPID, MTDO. |
| 22 | IO8 | bidirectional | GPIO8; strapping pin that controls boot mode and ROM message printing. |
| 23 | IO9 | bidirectional | GPIO9; strapping pin that controls chip boot mode, with a weak pull-up at reset. |
| 24 | NC | unconnected | Not connected on the module. |
| 25 | NC | unconnected | Not connected on the module. |
| 26 | IO18 | bidirectional | GPIO18, USB_D-. |
| 27 | IO19 | bidirectional | GPIO19, USB_D+. |
| 28 | NC | unconnected | Not connected on the module. |
| 29 | NC | unconnected | Not connected on the module. |
| 30 | RXD0 | bidirectional | GPIO20, U0RXD (UART0 receive). |
| 31 | TXD0 | bidirectional | GPIO21, U0TXD (UART0 transmit). |
| 32 | NC | unconnected | Not connected on the module. |
| 33 | NC | unconnected | Not connected on the module. |
| 34 | NC | unconnected | Not connected on the module. |
| 35 | NC | unconnected | Not connected on the module. |
| 36 | GND | power_in | Ground pin of the module. |
| 37 | GND | power_in | Ground pin of the module. |
| 38 | GND | power_in | Ground pin of the module. |
| 39 | GND | power_in | Ground pin of the module. |
| 40 | GND | power_in | Ground pin of the module. |
| 41 | GND | power_in | Ground pin of the module. |
| 42 | GND | power_in | Ground pin of the module. |
| 43 | GND | power_in | Ground pin of the module. |
| 44 | GND | power_in | Ground pin of the module. |
| 45 | GND | power_in | Ground pin of the module. |
| 46 | GND | power_in | Ground pin of the module. |
| 47 | GND | power_in | Ground pin of the module. |
| 48 | GND | power_in | Ground pin of the module. |
| 49 | GND | power_in | Ground pin of the module (EPAD thermal pad); soldering it to the base board is optional but improves thermal performance. |
| 50 | GND | power_in | Ground pin of the module. |
| 51 | GND | power_in | Ground pin of the module. |
| 52 | GND | power_in | Ground pin of the module. |
| 53 | GND | power_in | Ground pin of the module. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | Module |
| Category | RF and Wireless |
| Pins | 53 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | | 3.6 | V | | 21 |
| Power supply voltage | VDD33 | 3 | 3.3 | 3.6 | V | | 21 |
| Current delivered by external power supply | IVDD | 0.5 | | | A | | 21 |
| Operating ambient temperature | TA | -40 | | 105 | °C | 105 °C version module | 21 |
| High-level input current | IIH | | | 50 | nA | | 21 |
| Low-level input current | IIL | | | 50 | nA | | 21 |
| Power supply voltage (1.8 V) | VCC | 1.65 | 1.8 | 2 | V | Flash, power supply voltage (1.8 V) | 23 |
| Power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | Flash, power supply voltage (3.3 V) | 23 |
| Maximum clock frequency | FC | 80 | | | MHz | Flash | 23 |
| Data retention time | TRET | 20 | | | years | Flash | 23 |
| Page program time | TPP | | 0.8 | 5 | ms | Flash | 23 |
| Sector erase time (4 KB) | TSE | | 70 | 500 | ms | Flash | 23 |
| Block erase time (32 KB) | TBE1 | | 0.2 | 2 | s | Flash | 23 |
| Block erase time (64 KB) | TBE2 | | 0.3 | 3 | s | Flash | 23 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | THERMOPLASTIC | | HOUSING MATERIAL: THERMOPLASTIC, WHITE, UL 94V-0; | 36 |
| contacts | COPPER ALLOY | gold | CONTACT MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 36 |
| shell | COPPER ALLOY | gold | SHELL MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 36 |
## CAD (land: Espressif; 3D: manufacturer)
- Symbol: `ESP32-C3-MINI-1-H4-ES`
- Footprint: `PCM_Espressif:ESP32-C3-MINI-1`
- 3D model: Module (Espressif KiCad libraries, STEP)
- 3D model files: `esp32-c3-mini-1-h4-es-etched.step` / `esp32-c3-mini-1-h4-es-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esp32-c3-mini-1-h4-es.step` / `esp32-c3-mini-1-h4-es.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Espressif Systems datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c3-mini-1_datasheet_en.pdf) (48 pp, sha256 `b53790a43866afb4`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.
[Datasheet PDF](docs/esp32-c3-mini-1-h4-es-datasheet.pdf)