main
Ray Publish 0.2.0 c47dfbe

ESP32-C3-DevKitM-1

Espressif Systems · development board · ESP32-C3-MINI-1 module (4 MB flash, PCB antenna) · orderable as ESP32-C3-DevKitM-1-N4X

This page carries the board as a part, so a carrier board or a breakout molecule can place it: the header pinout as a symbol, the two-row header pattern as a footprint, and a 3D model of the whole board standing on its headers.

Footprint

Two 1 x 15 headers at 2.54 mm, 22.86 mm apart, from Espressif's dimension drawing. The footprint origin is the centre of the header pattern. F.Fab draws the board (25.4 x 38.91 mm) and the module's antenna, which runs 5.34 mm past the board's top edge. Espressif keeps copper away from the antenna, so the footprint has a copper keepout under the overhang.

Pinout

As printed in Espressif's user guide. J1 is the left header and J3 the right one, with the module at the top.

J1 Name Function J3 Name Function
J1-1 GND Ground. J3-1 GND Ground.
J1-2 3V3 3.3 V power supply. J3-2 TX GPIO21, U0TXD.
J1-3 3V3 3.3 V power supply. J3-3 RX GPIO20, U0RXD.
J1-4 IO2 GPIO2, ADC1_CH2, FSPIQ (strapping pin). J3-4 GND Ground.
J1-5 IO3 GPIO3, ADC1_CH3. J3-5 IO9 GPIO9 (strapping pin, Boot button).
J1-6 GND Ground. J3-6 IO8 GPIO8 (strapping pin), RGB LED.
J1-7 RST CHIP_PU. J3-7 GND Ground.
J1-8 GND Ground. J3-8 IO7 GPIO7, FSPID, MTDO.
J1-9 IO0 GPIO0, ADC1_CH0, XTAL_32K_P. J3-9 IO6 GPIO6, FSPICLK, MTCK.
J1-10 IO1 GPIO1, ADC1_CH1, XTAL_32K_N. J3-10 IO5 GPIO5, ADC2_CH0, FSPIWP, MTDI.
J1-11 IO10 GPIO10, FSPICS0. J3-11 IO4 GPIO4, ADC1_CH4, FSPIHD, MTMS.
J1-12 GND Ground. J3-12 GND Ground.
J1-13 5V 5 V power supply. J3-13 IO18 GPIO18, USB_D-.
J1-14 5V 5 V power supply. J3-14 IO19 GPIO19, USB_D+.
J1-15 GND Ground. J3-15 GND Ground.

3D model

Rebuilt from Espressif's own manufacturing data: the PCB layout plots (PCB_ESP32-C3-DEVKITM-1_V1_20200915AA.pdf) give every part, its pads (by the plot's own pad designators) and the silkscreen as Espressif drew them; the dimension DXF (DIMENSION_ESP32-C3-DEVKITM-1_V1_20200915AA.dxf) gives the outline. The plot draws no holes for the through-hole pads, so they are drilled 1.0 mm, the KiCad pin-header drill (a builder choice, stated here). The module is Espressif's ESP32-C3-MINI-1 model (espressif/kicad-libraries) with its name etched; every other part is a KiCad library model fitted to its pads in the plot (worst fit 0.07 mm), each listed below with where its model came from. J2: Micro-B jack with no maker datasheet, generated from the USB Micro-B receptacle interface and the jack height in Espressif's BOM (S3-DevKitC-1 reference design, USB_5P_MICRO_F_ML), on this board's own land. The headers are mounted below the board, pins down, as the kit ships. Solder mask black and silkscreen white, from Espressif's user-guide photo. Two-pad parts are fitted by their land: where a diode and an LED share a land, the land cannot tell which, and the passive values are not read from the schematic.

Documents

Modules: schematic: ESP32-C3-MINI-1.

Schematic (Espressif)

Loads when you scroll to it. Unloads after 5 minutes in the background.

Dimensions (Espressif)

Loads when you scroll to it. Unloads after 5 minutes in the background.

Parts on the board

Ref Part Page 3D model
C1 (none) KiCad library model, fitted to its plotted pads
C2 (none) KiCad library model, fitted to its plotted pads
C4 (none) KiCad library model, fitted to its plotted pads
C5 (none) KiCad library model, fitted to its plotted pads
C6 (none) KiCad library model, fitted to its plotted pads
C7 (none) KiCad library model, fitted to its plotted pads
C8 (none) KiCad library model, fitted to its plotted pads
C9 (none) KiCad library model, fitted to its plotted pads
C10 (none) KiCad library model, fitted to its plotted pads
C11 (none) KiCad library model, fitted to its plotted pads
C12 (none) KiCad library model, fitted to its plotted pads
C13 (none) KiCad library model, fitted to its plotted pads
C14 (none) KiCad library model, fitted to its plotted pads
D1 (none) KiCad library model, fitted to its plotted pads
D2 (none) KiCad library model, fitted to its plotted pads
D3 (none) KiCad library model, fitted to its plotted pads
D4 (none) KiCad library model, fitted to its plotted pads
D5 (none) KiCad library model, fitted to its plotted pads
D6 (none) KiCad library model, fitted to its plotted pads
J1 (none) KiCad library model, fitted to its plotted pads
J2 (none) generated: USB Micro-B receptacle interface + Espressif BOM jack height (S3-DevKitC-1 reference design item 16, USB_5P_MICRO_F_ML), on this board's own land
J3 (none) KiCad library model, fitted to its plotted pads
Q1 (none) KiCad library model, fitted to its plotted pads
Q2 (none) KiCad library model, fitted to its plotted pads
R1 (none) KiCad library model, fitted to its plotted pads
R2 (none) KiCad library model, fitted to its plotted pads
R3 (none) KiCad library model, fitted to its plotted pads
R4 (none) KiCad library model, fitted to its plotted pads
R5 (none) KiCad library model, fitted to its plotted pads
R10 (none) KiCad library model, fitted to its plotted pads
R11 (none) KiCad library model, fitted to its plotted pads
R12 (none) KiCad library model, fitted to its plotted pads
R14 (none) KiCad library model, fitted to its plotted pads
R16 (none) KiCad library model, fitted to its plotted pads
R17 (none) KiCad library model, fitted to its plotted pads
R18 (none) KiCad library model, fitted to its plotted pads
R19 (none) KiCad library model, fitted to its plotted pads
R20 (none) KiCad library model, fitted to its plotted pads
R21 (none) KiCad library model, fitted to its plotted pads
R22 (none) KiCad library model, fitted to its plotted pads
SW1 (none) KiCad library model, fitted to its plotted pads
SW2 (none) KiCad library model, fitted to its plotted pads
U2 (none) KiCad library model, fitted to its plotted pads
U3 (none) KiCad library model, fitted to its plotted pads
U4 (none) Espressif's ESP32-C3-MINI-1 model (espressif/kicad-libraries), name etched