component
ESDZL5-1F4
Public Made by Adomby adom
STMicroelectronics ESD And Surge Protection (TVS/ESD), 0201. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
873b070
ESDZL5-1F4
STMicroelectronics · ESD And Surge Protection (TVS/ESD) · 0201
ESDZL5-1F4 from STMicroelectronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Pin 1 | passive | Pin 1 is one terminal of the unidirectional line TVS, identified by the bar on the package; with an 8 kV contact discharge (IEC 61000-4-2) applied Pin 1 to Pin 2, the clamping voltage at 30 ns is 9.5 V. |
| 2 | PIN2 | passive | Pin 2 is the other terminal of the unidirectional TVS, and with an 8 kV contact discharge applied Pin 2 to Pin 1 the clamping voltage at 30 ns is 3 V; the device is rated for VRM 5.5 V max, IRM 100 nA max at VRM, and Tj -55 to +150 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | 0201 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak pulse voltage (contact discharge) | VPP | 15 | kV | Contact discharge | 2 | ||
| Peak pulse voltage (air discharge) | VPP | 30 | kV | Air discharge | 2 | ||
| Peak pulse power dissipation | PPP | 60 | W | 8/20 µs | 2 | ||
| Peak pulse current | IPP | 7 | A | 8/20 µs | 2 | ||
| Operating junction temperature range | Tj | -55 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Maximum lead temperature for soldering | TL | 260 | °C | during 10 s | 2 | ||
| Forward voltage | VF | 0.7 | 0.9 | V | IF = 10 mA | 2 | |
| Trigger voltage | VTrig | 5.8 | 10 | V | Higher voltage than VTrig guarantees the protection turn-on | 2 | |
| Holding voltage | VH | 4 | 4.6 | V | Lower voltage than VH guarantees the protection turn-off | 2 | |
| Stand-off voltage | VRM | 5.5 | V | 2 | |||
| Leakage current | IRM | 100 | nA | VRM = 5.5 V | 2 | ||
| Clamping voltage (8 kV contact discharge after 30 ns, Pin1 to Pin2) | VCL | 9.5 | V | 8 kV contact discharge after 30 ns, IEC 61000-4-2, Pin1 to Pin2 | 2 | ||
| Clamping voltage (8 kV contact discharge after 30 ns, Pin2 to Pin1) | VCL | 3 | V | 8 kV contact discharge after 30 ns, IEC 61000-4-2, Pin2 to Pin1 | 2 | ||
| Clamping voltage (8/20 µs waveform) | VCL | 10 | V | 8/20 µs waveform, IPP = 7 A | 2 | ||
| Input capacitance per line | CLINE | 7.5 | 9.5 | pF | F = 1 MHz, VLINE = 0 V, VOSC = 30 mV | 2 | |
| Dynamic resistance | RD | 0.2 | Ω | Pulse duration 100 ns | 2 |
CAD (KiCad official)
- Symbol:
ESDZL5-1F4 - Footprint:
Diode_SMD:D_0201_0603Metric - 3D model: 0201, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.3 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
esdzl5-1f4-etched.step/esdzl5-1f4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esdzl5-1f4.step/esdzl5-1f4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (9 pp, sha256
12e7bd26bd9764e0, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ESDZL5-1F4
**STMicroelectronics** · ESD And Surge Protection (TVS/ESD) · 0201
ESDZL5-1F4 from STMicroelectronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Pin 1 | passive | Pin 1 is one terminal of the unidirectional line TVS, identified by the bar on the package; with an 8 kV contact discharge (IEC 61000-4-2) applied Pin 1 to Pin 2, the clamping voltage at 30 ns is 9.5 V. |
| 2 | PIN2 | passive | Pin 2 is the other terminal of the unidirectional TVS, and with an 8 kV contact discharge applied Pin 2 to Pin 1 the clamping voltage at 30 ns is 3 V; the device is rated for VRM 5.5 V max, IRM 100 nA max at VRM, and Tj -55 to +150 °C. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | 0201 |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak pulse voltage (contact discharge) | VPP | | | 15 | kV | Contact discharge | 2 |
| Peak pulse voltage (air discharge) | VPP | | | 30 | kV | Air discharge | 2 |
| Peak pulse power dissipation | PPP | | | 60 | W | 8/20 µs | 2 |
| Peak pulse current | IPP | | | 7 | A | 8/20 µs | 2 |
| Operating junction temperature range | Tj | -55 | | 150 | °C | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| Maximum lead temperature for soldering | TL | | | 260 | °C | during 10 s | 2 |
| Forward voltage | VF | | 0.7 | 0.9 | V | IF = 10 mA | 2 |
| Trigger voltage | VTrig | 5.8 | | 10 | V | Higher voltage than VTrig guarantees the protection turn-on | 2 |
| Holding voltage | VH | 4 | | 4.6 | V | Lower voltage than VH guarantees the protection turn-off | 2 |
| Stand-off voltage | VRM | | | 5.5 | V | | 2 |
| Leakage current | IRM | | | 100 | nA | VRM = 5.5 V | 2 |
| Clamping voltage (8 kV contact discharge after 30 ns, Pin1 to Pin2) | VCL | | | 9.5 | V | 8 kV contact discharge after 30 ns, IEC 61000-4-2, Pin1 to Pin2 | 2 |
| Clamping voltage (8 kV contact discharge after 30 ns, Pin2 to Pin1) | VCL | | | 3 | V | 8 kV contact discharge after 30 ns, IEC 61000-4-2, Pin2 to Pin1 | 2 |
| Clamping voltage (8/20 µs waveform) | VCL | | | 10 | V | 8/20 µs waveform, IPP = 7 A | 2 |
| Input capacitance per line | CLINE | | 7.5 | 9.5 | pF | F = 1 MHz, VLINE = 0 V, VOSC = 30 mV | 2 |
| Dynamic resistance | RD | | | 0.2 | Ω | Pulse duration 100 ns | 2 |
## CAD (KiCad official)
- Symbol: `ESDZL5-1F4`
- Footprint: `Diode_SMD:D_0201_0603Metric`
- 3D model: 0201, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.3 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `esdzl5-1f4-etched.step` / `esdzl5-1f4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esdzl5-1f4.step` / `esdzl5-1f4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/esdzl5-1f4.pdf) (9 pp, sha256 `12e7bd26bd9764e0`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/esdzl5-1f4-datasheet.pdf)