component
ES2F-E3
Public Made by Adomby adom
Vishay Intertech Fast Recovery / High Efficiency Diodes, DO-214AA(SMB). Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownES2F-E3
Vishay Intertech · Fast Recovery / High Efficiency Diodes · DO-214AA(SMB)
ES2F-E3 from Vishay Intertech, in a DO-214AA(SMB). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DO-214AA(SMB) |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum repetitive peak reverse voltage | VRRM | 300 | V | 1 | |||
| Working peak reverse voltage | VRWM | 225 | V | 1 | |||
| Maximum RMS voltage | VRMS | 210 | V | 1 | |||
| Maximum average forward rectified current | IF(AV) | 2 | A | at TL = 110 °C | 1 | ||
| Peak forward surge current | IFSM | 50 | A | 8.3 ms single half sine-wave superimposed on rated load | 1 | ||
| Operating junction and storage temperature range | TJ, TSTG | -55 | 150 | °C | 1 | ||
| Maximum instantaneous forward voltage | VF | 1.1 | V | 2.0 A | 2 | ||
| Maximum reverse current at VRRM | IR | 10 | µA | at VRRM, TA = 25 °C | 2 | ||
| Maximum reverse current at VRRM | IR | 200 | µA | at VRRM, TA = 100 °C | 2 | ||
| Maximum reverse recovery time | trr | 35 | ns | IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A | 2 | ||
| Maximum reverse recovery time | trr | 50 | ns | IF = 1.0 A, dI/dt = 100 A/µs, VR = 30 V, Irr = 0.1 IRM | 2 | ||
| Maximum reverse recovery current | IRM | 3 | A | IF = 1.0 A, dI/dt = 100 A/µs, VR = 30 V, Irr = 0.1 IRM | 2 | ||
| Maximum stored charge | Qrr | 50 | nC | IF = 1.0 A, dI/dt = 100 A/µs, VR = 30 V, Irr = 0.1 IRM | 2 | ||
| Typical junction capacitance | CJ | 15 | pF | 4.0 V, 1 MHz | 2 | ||
| Maximum thermal resistance, junction to ambient | RJA | 75 | °C/W | Units mounted on PCB 5.0 mm x 5.0 mm land areas (footnote 1) | 2 | ||
| Maximum thermal resistance, junction to lead | RJL | 25 | °C/W | Units mounted on PCB 5.0 mm x 5.0 mm land areas (footnote 1) | 2 |
CAD (KiCad official)
- Symbol:
ES2F-E3 - Footprint:
Diode_SMD:D_SMB - 3D model: DO-214AA(SMB) (KiCad packages3D, STEP)
- 3D model files:
es2f-e3-etched.step/es2f-e3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);es2f-e3.step/es2f-e3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (5 pp, sha256
36d3b15326ebe95a, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarycathode-band convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).