main
Ray Publish 0.1.0 2098641

EMC1413-A-AIA-TR

Microchip Tech · Temperature Sensors · UDFN-10-EP(3x3)

EMC1413-A-AIA-TR from Microchip Tech, in a UDFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin; absolute maximum supply voltage is -0.3 to 4.0 V.
2 DP1 passive External diode 1 positive (anode) analog input/output connection.
3 DN1 passive External diode 1 negative (cathode) analog input/output connection.
4 DP2/DN3 passive External diode 2 positive (anode) connection, or external diode 3 negative (cathode) connection for anti-parallel diodes (EMC1414 only).
5 DN2/DP3 passive External diode 2 negative (cathode) connection, or external diode 3 positive (anode) connection for anti-parallel diodes (EMC1414 only).
6 GND power_in Ground.
7 THERM/ADDR bidirectional Open-drain (5V tolerant) critical THERM output requiring a pull-up resistor; also selects the SMBus address based on the pull-up resistor.
8 ALERT output Active-low open-drain (5V tolerant) digital ALERT output requiring a pull-up resistor.
9 SMDATA bidirectional SMBus data input/open-drain output (5V tolerant), requires a pull-up resistor.
10 SMCLK input SMBus clock input (5V tolerant), requires a pull-up resistor.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package UDFN-10-EP(3x3)
Category Sensors
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 3.3 3.6 V 11
Supply Current IDD 430 850 μA 1 conversion / sec, dynamic averaging disabled 11
Supply Current IDD 930 1200 μA 4 conversions / sec, dynamic averaging enabled 11
Supply Current IDD 1120 μA > 16 conversions / sec, dynamic averaging enabled 11
Standby Supply Current IDD 170 230 μA Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. 11
Internal Temperature Accuracy -1 0.25 1 °C -5°C < TA < 100°C 11
Internal Temperature Accuracy -2 2 °C -40°C < TA < 125°C 11
External Temperature Accuracy -1 0.25 1 °C +20°C < TDIODE < +110°C, 0°C < TA < 100°C 11
External Temperature Accuracy -2 0.5 2 °C -40°C < TDIODE < 127°C 11
Capacitive Filter CFILTER 2.2 2.7 nF Connected across external diode 11
ALERT/THERM Output Low Voltage VOL 0.4 V ISINK = 8mA 11
ALERT/THERM Leakage Current ILEAK -5 5 μA Device powered or unpowered, TA < 85°C, pull-up voltage < 3.6V 11
Temperature Resolution 0.125 °C 11
Conversion Time all Channels tCONV 150 ms default settings 11
SMBus Input High Voltage VIH 2 3.6 V 5V Tolerant; max printed as VDD 12
SMBus Input Low Voltage VIL -0.3 0.8 V 5V Tolerant 12
SMBus Leakage Current ILEAK -5 5 μA Powered or unpowered, TA < 85°C 12
Hysteresis 420 mV 12
Input Capacitance CIN 5 pF 12
Output Low Sink Current IOL 8.2 15 mA SMDATA = 0.4V 12
Clock Frequency fSMB 10 400 kHz 12
Spike Suppression tSP 50 ns 12
Bus Free Time Stop to Start tBUF 1.3 μs 12
Hold Time: Start tHD:STA 0.6 μs 12
Setup Time: Start tSU:STA 0.6 μs 12
Setup Time: Stop tSU:STO 0.6 μs 12
Data Hold Time tHD:DAT 0 μs When transmitting to the master 12
Data Hold Time tHD:DAT 0.3 μs When receiving from the master 12
Data Setup Time tSU:DAT 100 ns 12
Clock Low Period tLOW 1.3 μs 12
Clock High Period tHIGH 0.6 μs 12
Clock/Data Fall time tFALL 300 ns Min = 20+0.1CLOAD ns 12
Clock/Data Rise time tRISE 300 ns Min = 20+0.1CLOAD ns 12
Capacitive Load CLOAD 400 pF per bus line 12
Supply Voltage (absolute maximum) VDD -0.3 4 V 10
Voltage on 5V tolerant pins V5VT_pin -0.3 5.5 V 10
Voltage on 5V tolerant pins difference /V5VT_pin - VDD/ 0 3.6 V see Note 4.1 10
Operating Temperature Range -40 125 °C 10
Storage Temperature Range -55 150 °C 10
ESD Rating, All pins 2000 V HBM 10
Thermal Resistance DFN-10 θj-a 77.1 °C/W Package Thermal Characteristics for DFN-10 10

CAD (KiCad official)

  • Symbol: EMC1413-A-AIA-TR
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: UDFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: emc1413-a-aia-tr-etched.step / emc1413-a-aia-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); emc1413-a-aia-tr.step / emc1413-a-aia-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (54 pp, sha256 59cf383eb07ca8b0, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF