component
EMC1412-2-ACZL-TR
Public Made by Adomby adom
Microchip Tech Temperature Sensors, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
EMC1412-2-ACZL-TR
Microchip Tech · Temperature Sensors · MSOP-8
EMC1412-2-ACZL-TR from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin; absolute maximum -0.3 to 4.0 V, and the pull-up voltage on 5V-tolerant pins must never differ from VDD by more than 3.6 V. |
| 2 | DP | passive | External diode positive (anode) connection, analog input/output. |
| 3 | DN | passive | External diode negative (cathode) connection, analog input/output. |
| 4 | THERM | output | Active-low open-drain critical THERM output (5V tolerant) requiring a pull-up resistor, and the pull-up resistor value also selects the SMBus address (ADDR). |
| 5 | GND | power_in | Ground. |
| 6 | ALERT | output | Active-low open-drain digital ALERT output (5V tolerant) requiring a pull-up resistor. |
| 7 | SMDATA | bidirectional | SMBus data input/open-drain output (5V tolerant) requiring a pull-up resistor. |
| 8 | SMCLK | input | SMBus clock digital input (5V tolerant) requiring a pull-up resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 3.3 | 3.6 | V | 11 | |
| Supply Current | IDD | 430 | 850 | μA | 1 conversion / sec, dynamic averaging disabled | 11 | |
| Supply Current | IDD | 930 | 1200 | μA | 4 conversions / sec, dynamic averaging enabled | 11 | |
| Supply Current | IDD | 1120 | μA | > 16 conversions / sec, dynamic averaging enabled | 11 | ||
| Standby Supply Current | IDD | 170 | 230 | μA | Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. | 11 | |
| Internal Temperature Accuracy | -1 | 0.25 | 1 | °C | -5°C < TA < 100°C | 11 | |
| Internal Temperature Accuracy | -2 | 2 | °C | -40°C < TA < 125°C | 11 | ||
| Internal Temperature Resolution | 0.125 | °C | 11 | ||||
| External Temperature Accuracy | -1 | 0.25 | 1 | °C | +20°C < TDIODE < +110°C, 0°C < TA < 100°C | 11 | |
| External Temperature Accuracy | -2 | 0.5 | 2 | °C | -40°C < TDIODE < 127°C | 11 | |
| External Temperature Resolution | 0.125 | °C | 11 | ||||
| Conversion Time all Channels | tCONV | 190 | ms | default settings | 11 | ||
| Capacitive Filter | CFILTER | 2.2 | 2.7 | nF | Connected across external diode | 11 | |
| ALERT/THERM Output Low Voltage | VOL | 0.4 | V | ISINK = 8mA | 11 | ||
| ALERT/THERM Leakage Current | ILEAK | -5 | 5 | μA | Device powered or unpowered, TA < 85°C, pull-up voltage < 3.6V | 11 | |
| SMBus Input High Voltage | VIH | 2 | V | 5V Tolerant | 12 | ||
| SMBus Input Low Voltage | VIL | -0.3 | 0.8 | V | 5V Tolerant | 12 | |
| SMBus Leakage Current | ILEAK | -5 | 5 | μA | Powered or unpowered, TA < 85°C | 12 | |
| SMBus Hysteresis | 420 | mV | 12 | ||||
| SMBus Input Capacitance | CIN | 5 | pF | 12 | |||
| Output Low Sink Current | IOL | 8.2 | 15 | mA | SMDATA = 0.4V | 12 | |
| Clock Frequency | fSMB | 10 | 400 | kHz | 12 | ||
| Spike Suppression | tSP | 50 | ns | 12 | |||
| Bus Free Time Stop to Start | tBUF | 1.3 | μs | 12 | |||
| Hold Time: Start | tHD:STA | 0.6 | μs | 12 | |||
| Setup Time: Start | tSU:STA | 0.6 | μs | 12 | |||
| Setup Time: Stop | tSU:STO | 0.6 | μs | 12 | |||
| Data Hold Time | tHD:DAT | 0 | μs | When transmitting to the master | 12 | ||
| Data Hold Time | tHD:DAT | 0.3 | μs | When receiving from the master | 12 | ||
| Data Setup Time | tSU:DAT | 100 | ns | 12 | |||
| Clock Low Period | tLOW | 1.3 | μs | 12 | |||
| Clock High Period | tHIGH | 0.6 | μs | 12 | |||
| Clock/Data Fall time | tFALL | 300 | ns | Min = 20+0.1CLOAD ns | 12 | ||
| Clock/Data Rise time | tRISE | 300 | ns | Min = 20+0.1CLOAD ns | 12 | ||
| Capacitive Load | CLOAD | 400 | pF | per bus line | 12 | ||
| Supply Voltage (absolute maximum) | VDD | -0.3 | 4 | V | 10 | ||
| Voltage on 5V tolerant pins | V5VT_pin | -0.3 | 5.5 | V | 10 | ||
| Voltage on 5V tolerant pins difference | /V5VT_pin - VDD/ | 0 | 3.6 | V | see Note 4.1 | 10 | |
| Voltage on any other pin to Ground | -0.3 | 3.6 | V | -0.3 to VDD +0.3 V | 10 | ||
| Operating Temperature Range | -40 | 125 | °C | 10 | |||
| Storage Temperature Range | -55 | 150 | °C | 10 | |||
| ESD Rating, All pins | 2000 | V | HBM | 10 | |||
| Thermal Resistance junction-ambient MSOP-8 | θj-a | 140.8 | °C/W | Package Thermal Characteristics for MSOP-8 | 10 |
CAD (KiCad official)
- Symbol:
EMC1412-2-ACZL-TR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
emc1412-2-aczl-tr-etched.step/emc1412-2-aczl-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);emc1412-2-aczl-tr.step/emc1412-2-aczl-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
abfb606a13fb93a0, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).