main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers emc1403-1-aizl-tr: viewers · Ray
emc1403-1-aizl-tr-etched.glb Publish 0.1.0 · Ray
emc1403-1-aizl-tr-etched.step emc1403-1-aizl-tr: factory component page (tier=mfr) · Ray
emc1403-1-aizl-tr-hero.glb emc1403-1-aizl-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
emc1403-1-aizl-tr-hero.overlay.json Publish 0.1.0 · Ray
emc1403-1-aizl-tr.glb Publish 0.1.0 · Ray
emc1403-1-aizl-tr.kicad_mod Publish 0.1.0 · Ray
emc1403-1-aizl-tr.kicad_sym Publish 0.1.0 · Ray
emc1403-1-aizl-tr.lbr Publish 0.1.0 · Ray
emc1403-1-aizl-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

EMC1403-1-AIZL-TR

Microchip Tech · Temperature Sensors · MSOP-10

EMC1403-1-AIZL-TR from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input (3.3V supply), absolute maximum -0.3 to 4.0 V.
2 DP1 bidirectional External diode 1 positive (anode) connection, analog input/output.
3 DN1 bidirectional External diode 1 negative (cathode) connection, analog input/output.
4 DP2/DN3 bidirectional External diode 2 positive (anode) connection, or external diode 3 negative (cathode) connection for anti-parallel diodes, analog input/output.
5 DN2/DP3 bidirectional External diode 2 negative (cathode) connection, or external diode 3 positive (anode) connection for anti-parallel diodes, analog input/output.
6 GND power_in Ground.
7 THERM output Critical THERM open-drain output signal, 5V tolerant, requires pull-up resistor; pull-up voltage minus VDD must not exceed 3.6V.
8 ALERT output Active-low open-drain digital ALERT output signal, 5V tolerant, requires pull-up resistor; pull-up voltage minus VDD must not exceed 3.6V.
9 SMDATA bidirectional SMBus data input/open-drain output, 5V tolerant, requires pull-up resistor; pull-up voltage minus VDD must not exceed 3.6V.
10 SMCLK input SMBus clock input, 5V tolerant, requires pull-up resistor; pull-up voltage minus VDD must not exceed 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Sensors
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 3.3 3.6 V 12
Supply Current IDD 430 850 uA 1 conversion / sec, dynamic averaging disabled 12
Supply Current IDD 930 1200 uA 4 conversions / sec, dynamic averaging enabled 12
Supply Current IDD 1120 uA > 16 conversions / sec, dynamic averaging enabled 12
Standby Supply Current IDD 170 230 uA Device in Standby mode, no SMBus communications, ALERT and THERM pins not asserted. 12
Internal Temperature Accuracy -1 0.25 1 °C -5°C < TA < 100°C 12
Internal Temperature Accuracy -2 2 °C -40°C < TA < 125°C 12
External Temperature Accuracy -1 0.25 1 °C +20°C < TDIODE < +110°C, 0°C < TA < 100°C 12
External Temperature Accuracy -2 0.5 2 °C -40°C < TDIODE < 127°C 12
Capacitive Filter CFILTER 2.2 2.5 nF Connected across external diode 12
Output Low Voltage VOL 0.4 V ISINK = 8mA, ALERT and THERM pins 12
Leakage Current ILEAK -5 5 uA ALERT and THERM pins, device powered or unpowered, TA < 85°C, pull-up voltage < 3.6V 12
Conversion Time tCONV 190 ms EMC1403, default settings 12
Temperature Resolution 0.125 °C Internal and external monitors 12
Input High Voltage VIH 2 V 5V Tolerant, max VDD 13
Input Low Voltage VIL -0.3 0.8 V 5V Tolerant 13
Input High/Low Current IIH / IIL -5 5 uA Powered or unpowered, TA < 85°C 13
Hysteresis 420 mV 13
Input Capacitance CIN 5 pF 13
Output Low Sink Current IOL 8.2 15 mA SMDATA = 0.4V 13
Clock Frequency fSMB 10 400 kHz 13
Spike Suppression tSP 50 ns 13
Bus free time Start to Stop tBUF 1.3 us 13
Hold Time: Start tHD:STA 0.6 us 13
Setup Time: Start tSU:STA 0.6 us 13
Setup Time: Stop tSU:STP 0.6 us 13
Data Hold Time tHD:DAT 0 us When transmitting to the master 13
Data Hold Time tHD:DAT 0.3 us When receiving from the master 13
Data Setup Time tSU:DAT 100 ns 13
Clock Low Period tLOW 1.3 us 13
Clock High Period tHIGH 0.6 us 13
Clock/Data Fall time tFALL 300 ns Min = 20+0.1CLOAD ns 13
Clock/Data Rise time tRISE 300 ns Min = 20+0.1CLOAD ns 13
Capacitive Load CLOAD 400 pF per bus line 13
Supply Voltage VDD -0.3 4 V 11
Voltage on 5V tolerant pins V5VT_pin -0.3 5.5 V 11
Voltage on 5V tolerant pins difference /V5VT_pin - VDD/ -0.3 3.6 V see Note 3.1 11
Voltage on any other pin to Ground -0.3 3.6 V -0.3 to VDD +0.3 11
Operating Temperature Range -40 125 °C 11
Storage Temperature Range -55 150 °C 11
ESD Rating, All pins 2000 V HBM 11
Thermal Resistance θj-a 132.2 °C/W Package Thermal Characteristics for MSOP-10 11

CAD (KiCad official)

  • Symbol: EMC1403-1-AIZL-TR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: emc1403-1-aizl-tr-etched.step / emc1403-1-aizl-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); emc1403-1-aizl-tr.step / emc1403-1-aizl-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (55 pp, sha256 7ef39bb41c91858d, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF