Rev 1: 5 x 7 LED dot matrix

Ellaine's name in 108 white LEDs, powered from a phone charger through a USB-C port on the right edge. It starts where Steven's board ended up: his first revision showed that a 3 x 5 font cannot draw an N, so this one uses a 5 x 7 font from the start.

Rev 1, 3D render of the assembled board

Status Designed and verified in software. Not fabricated yet.
Date 2026-09-23
Board 154.4 x 44.4 mm, 2 layer FR4, Adom molecule 154x44 absolute, medium machine pins
Letters 108 white 0603 LEDs, 5 x 7 pixel font, 3 mm pitch, 3 mm letter gap, 123 mm of text
Power USB-C on the east edge, 5 V, about 460 mA with every LED lit
Result 0 DRC errors, 112 of 112 nets connected, USB-C geometry on the guide's reference numbers
Parts every line an Adom Basic Part with an MPN
Lineage Steven's nameplate, Rev 1 (the failed N) and Rev 2 (the fix)

The board, live

Orbit, zoom, hover any part for its refdes and net, x-ray the copper with the Nets panel, or run the guided walkthrough. The PCB, Schematic and Parts tabs across the top are live too. Open full screen.

The question this revision asked

Steven's Rev 2 is written so the name is one line of code. Does that hold for a longer name with different letters (L, A and I are new), or does a 123 mm row of 108 LEDs need its own layout work?

Method

  1. Same source, new name. lib/index.tsx is Steven's Rev 2 with TEXT = "ELLAINE" and three glyphs added to the 5 x 7 font (L, A, I). The board sizes itself from the text: BOARD_W = ceil((123 + 30) / 2) * 2 = 154 mm.

    Why 5 x 7: the 3 x 5 N from Steven's Rev 1 next to the 5 x 7 N

  2. Parts. White LED IN-S63BT5UW (Inolux), 470 ohm CR0402-FX-4700GLF per LED, 4.7 kohm CR0402-FX-4701GLF CC pulldowns, 10 uF CL21A106KOQNNNG bulk, 100 nF 0402B104J160CT decoupling, USB-C TYPE-C-31-M-12 (LCSC C165948). All stocked on Adom's reels.

  3. Current budget. 108 LEDs at 330 ohm would draw about 650 mA, over the 500 mA a USB-C source gives without negotiation. At 470 ohm each LED runs about 4.3 mA, so the board draws about 460 mA.

  4. USB-C. Wrapper from the adom-usbc guide (extended only to forward schematic coordinates), mount="east", pcbX = W/2 - 5 because the board is absolute sized.

  5. Verify geometry, not just DRC. Every build ran tsci build, adom-tsci lint and the union-find connectivity check in source/scripts/check-connectivity.py.

Results

Negative results: the name was not one line of code

The layout that routed Steven's board cleanly did not route Ellaine's. The longer row and new letter shapes moved the router's choices, and every change near the connector moved them again.

Toolchain / layout DRC errors Nets split
tscircuit 0.0.1753, resistor 1.6 mm below LED 37 2
tscircuit 0.0.2375, support parts at USB_X - 10, resistor 1.6 mm 3 0
same, resistor 1.65 mm, not rotated 7 0
same, resistor 1.7 mm 2 1
same, resistor 1.55 mm 1 0
support parts at USB_X - 11, resistor 1.6 mm 3 0
support parts at USB_X - 10, resistor 1.65 mm 0 0
USB-C moved 1 mm in for the edge fix, same layout 2 1
support parts at USB_X - 9 5 0
support parts at USB_X - 11, resistor 1.65 mm 0 0 (shipped)
support parts at USB_X - 10, resistor 1.6 mm 3 0
support parts at USB_X - 12 5 0

So the honest answer to the question: the circuit and the part choices carry over as one line of code; the routed layout does not. Each name needs its own short sweep, and a geometric connectivity check, because DRC alone passes boards with dead nets (see the "0 errors, 1 split" rows).

Final numbers

Check Value
Components 225: 108 LEDs, 110 resistors, 2 capacitors, 1 USB-C, 4 machine pins
Routing 334 routed traces for 336 declared (the 2 are the merged same-net USB-C tabs), 108 vias
DRC errors in circuit.json 0
Connectivity 112 of 112 nets, each one island
USB-C pad gap / anchor hole gap / mouth overhang 7.00 / 1.83 / 2.29 mm (guide reference 7.35 / 1.83 / 2.31)
USB-C pads / holes 12 / 6
adom-tsci lint 4 of 5 pass. The fifth is the machine-pin schematic symbols stacking, a known limit of the molecule library

Rev 1 top view

Reproduce this experiment

Tools used

Tool Version What it did here Get it
Claude Code, in Adom's Hydrogen desktop Claude Opus 5.5 The AI that wrote the board, ran every build and check, and wrote this page Adom Hydrogen
bun 1.4.0 JavaScript runtime that runs tscircuit curl -fsSL https://bun.sh/install | bash
tscircuit, @tscircuit/cli 0.0.2375 / 0.1.2134 Board description in TSX, autorouter, DRC, gerber and GLB export bun install --frozen-lockfile (pinned in bun.lock)
@tsci/adom-inc.molecule, @tsci/adom-inc.library 1.1.15 / 1.2.6 Adom molecule outline and corner machine pins same, through the .npmrc registry npm.tscircuit.com
adom-tsci 1.4.24 Live 3D / PCB / schematic preview, lint, gerber export, walkthrough, the viewer embedded on this page adom-wiki pkg install adom/adom-tsci
adom-usbc guide ships with adom-tsci The USB-C wrapper (copied verbatim) and the edge checks ~/.claude/skills/adom-tsci/guides/adom-usbc.md
scripts/check-connectivity.py this page Geometric pad-trace-via connectivity per net; catches opens DRC misses Python 3 standard library
scripts/sweep.sh this page Parallel layout sweep, reports DRC errors and split nets per variant bash + bun
scripts/make-bom.py this page Real BOM and pick-and-place spliced into the gerber zip Python 3 standard library
glb-datauri-textures.mjs, glb-make-zup.mjs adom-tsci page Makes the 3D models load in the wiki's sandbox and lie flat https://wiki.adom.inc/adom/adom-tsci/render/scripts/
pup (Adom Bridge) The renders on this page, shot in a background browser adom-bridge pup_open_window
adom-wiki Publishing this page preinstalled on Adom containers

What actually ran, in order

  1. Took Steven's Rev 2 lib/index.tsx, set TEXT = "ELLAINE" and added the L, A and I glyphs.
  2. Built on tscircuit 0.0.1753; swept four layouts; none connected every net.
  3. Installed tscircuit 0.0.2375 in a scratch copy (with the @tsci registry in .npmrc), rebuilt: every net connected, one via inside a USB-C pad. Swept the support-part position.
  4. Ran adom-tsci lint; fixed the schematic by giving every symbol explicit schX/schY.
  5. Ran the adom-usbc edge check; overhang was 3.29 mm because the board is absolute sized; moved the connector 1 mm in and swept again (scripts/sweep.sh).
  6. bunx tsci build lib/index.tsx --svgs --pcb-png --3d-png and bunx tsci export lib/index.tsx --format glb for the 3D model.
  7. adom-tsci start; found the preview's re-baked GLB had a 0-vertex USB-C; served the tscircuit-exported GLB instead and confirmed the console had no placeholder.
  8. adom-tsci export --format gerbers, then scripts/make-bom.py.
  9. Renders shot in a background pup window; this page built and published with adom-wiki.

Rebuild it yourself

adom-wiki repo download adom/ellaine-led-nameplate --extract ./ellaine
cd ellaine/rev1/source
bun install --frozen-lockfile          # pins tscircuit 0.0.2375, @tscircuit/cli 0.1.2134
bunx tsci build lib/index.tsx --svgs --pcb-png
bunx tsci export lib/index.tsx --format glb --output ../dist/lib/index/3d.glb
python3 scripts/check-connectivity.py  # expect: 112 nets checked, 0 split

Expected: 0 *_error entries in dist/lib/index/circuit.json, 334 routed traces.

Live 3D: the Rev 1 viewer, or the 3D Model view at the top of this page. To fabricate, upload rev1/fab/gerbers.zip; its bom.csv and pick_and_place.csv carry real part numbers.

Outputs

File What it is License
rev1/source/lib/index.tsx The board, as tscircuit TSX, parameterized by TEXT MIT
rev1/source/lib/UsbCReceptacle.tsx USB-C wrapper from the adom-usbc guide, plus schematic forwarding MIT
rev1/source/scripts/check-connectivity.py Geometric net connectivity check MIT
rev1/source/package.json, bun.lock, .npmrc Exact dependency pins MIT
rev1/viewer/circuit.json Complete circuit description CC0
rev1/viewer/3d.glb, board.glb 3D models CC0
rev1/fab/gerbers.zip, bom.csv, pick_and_place.csv, pcb.svg, schematic.svg Fabrication and assembly data CC0
this document Method, results, negative results CC BY 4.0

Provenance

Requested by John Lauer, Adom Industries
Designed by Claude Opus 5.5 (Anthropic), in Claude Code inside Adom's Hydrogen desktop
Toolchain tscircuit 0.0.2375, @tscircuit/cli 0.1.2134, @tsci/adom-inc.molecule 1.1.15, @tsci/adom-inc.library 1.2.6, adom-tsci 1.4.24, bun 1.4.0
Built on Steven's nameplate Rev 2 (same session, same source file)

Contributor roles (CRediT): John Lauer, conceptualization and supervision. Claude (AI), design, software, validation, writing.

Funding

The node is funded by the U.S. National Science Foundation PCL Test Bed program (ROR 021nxhr62). Made as a worked example of open publishing for the Astera Institute (ROR 00ydx1s47); Astera did not fund it.