component
EL3081
Public Made by Adomby adom
Everlight Elec Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownEL3081
Everlight Elec · Triac, SCR Output Optoisolators · DIP-6
EL3081 from Everlight Elec, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of the GaAs infrared emitting diode (input side); the input forward current is absolutely limited to 60 mA, with a 6 V reverse voltage rating. |
| 2 | Cathode | passive | Cathode of the GaAs infrared emitting diode (input side); the LED is driven to trigger the photo triac at IF of at least IFT max 15 mA for EL3081, with absolute maximum IF of 60 mA. |
| 3 | NC | unconnected | No connection; the datasheet marks this pin as not connected. |
| 4 | Terminal | passive | Main terminal of the monolithic zero-voltage-crossing photo triac output; the EL308X series (including EL3081) is rated for an off-state terminal voltage VDRM of 800 V and an on-state RMS current of 100 mA. |
| 5 | Substrate | unconnected | Substrate pin that must not be connected (do not connect). |
| 6 | Terminal | passive | Main terminal of the monolithic zero-voltage-crossing photo triac output; the EL308X series (including EL3081) is rated for an off-state terminal voltage VDRM of 800 V and an on-state RMS current of 100 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Everlight Elec |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Voltage | VF | 1.5 | V | IF = 30mA | 3 | ||
| Reverse Leakage current | IR | 10 | µA | VR = 6V | 3 | ||
| Peak Blocking Current (EL308X) | IDRM1 | 500 | nA | VDRM = Rated VDRM, IF = 0 mA*2 | 3 | ||
| Peak On-state Voltage | VTM | 3 | V | ITM=100 mA peak, IF=Rated IFT | 3 | ||
| Critical Rate of Rise off-state Voltage (EL308X) | dv/dt | 600 | V/µs | VPEAK =Rated VDRM, IF=0 (Fig. 10)*3 | 3 | ||
| Inhibit Voltage (MT1-MT2 voltage above which device will not trigger) | VINH | 20 | V | IF= Rated IFT | 3 | ||
| Leakage in Inhibited State | IDRM2 | 500 | µA | IF= Rated IFT, VDRM=Rated VDRM, off state | 3 | ||
| LED Trigger Current (EL3081) | IFT | 15 | mA | Main terminal Voltage=3V*4 | 4 | ||
| Forward current, recommended operating range | IF | 15 | 60 | mA | Per note *4: between max IFT (15 mA for EL3081) and absolute maximum IF (60 mA) | 4 | |
| Input Forward current | IF | 60 | mA | Ta=25℃ | 2 | ||
| Reverse voltage | VR | 6 | V | Ta=25℃ | 2 | ||
| Power dissipation (input) | PD | 100 | mW | Ta=25℃ | 2 | ||
| Derating factor (input, above Ta = 85°C) | PD | 3.8 | mW/°C | above Ta = 85°C | 2 | ||
| Off-state Output Terminal Voltage (EL308X) | VDRM | 800 | V | Ta=25℃ | 2 | ||
| Peak Repetitive Surge Current | ITSM | 1 | A | pw=1ms, 120pps | 2 | ||
| On-State RMS Current | IT(RMS) | 100 | mA | Ta=25℃ | 2 | ||
| Power dissipation (output) | PC | 300 | mW | Ta=25℃ | 2 | ||
| Derating factor (output, above Ta = 85°C) | PC | 7.6 | mW/℃ | above Ta = 85°C | 2 | ||
| Total power dissipation | PTOT | 330 | mW | Ta=25℃ | 2 | ||
| Isolation voltage | VISO | 5000 | Vrms | AC for 1 minute, R.H.= 40 ~ 60% R.H.; note *1 | 2 | ||
| Operating temperature | TOPR | -55 | 100 | ℃ | 2 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 2 | ||
| Soldering Temperature | TSOL | 260 | ℃ | For 10 seconds; note *2 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D | 13 |
CAD (KiCad official)
- Symbol:
EL3081 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
el3081-etched.step/el3081-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);el3081.step/el3081.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Everlight Elec datasheet (14 pp, sha256
6d81be5e83846295, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).