component
EL3063M-V
Public Made by Adomby adom
Everlight Elec Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
EL3063M-V
Everlight Elec · Triac, SCR Output Optoisolators · DIP-6
EL3063M-V from Everlight Elec, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | LED anode of the GaAs infrared emitting diode; absolute maximum input forward current is 60 mA and recommended IF lies between max IFT (5 mA for EL3063) and 60 mA. |
| 2 | Cathode | passive | LED cathode of the GaAs infrared emitting diode; reverse voltage rating is 6 V. |
| 3 | No Connection | unconnected | Labeled No Connection in the pin configuration; the datasheet assigns no function to this pin. |
| 4 | Terminal | passive | Output terminal of the monolithic zero-crossing photo triac; off-state output terminal voltage VDRM is 250 V for the EL303X series. |
| 5 | Substrate | unconnected | Internal substrate pin, marked do not connect. |
| 6 | Terminal | passive | Output terminal of the monolithic zero-crossing photo triac; on-state RMS current is rated at 100 mA maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Everlight Elec |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Voltage | VF | 1.5 | V | IF = 30mA | 3 | ||
| Reverse Leakage current | IR | 10 | µA | VR = 6V | 3 | ||
| Peak Blocking Current (EL306X) | IDRM1 | 500 | nA | VDRM = Rated VDRM, IF = 0 mA | 3 | ||
| Peak On-state Voltage | VTM | 3 | V | ITM=100 mA peak, IF=Rated IFT | 3 | ||
| Critical Rate of Rise off-state Voltage (EL306X) | dv/dt | 1000 | V/µs | VPEAK =Rated VDRM, IF=0 (Fig. 10) | 3 | ||
| Inhibit Voltage (MT1-MT2 voltage above which device will not trigger) | VINH | 20 | V | IF= Rated IFT | 3 | ||
| Leakage in Inhibited State | IDRM2 | 500 | µA | IF= Rated IFT, VDRM=Rated VDRM, off state | 3 | ||
| LED Trigger Current (EL3063) | IFT | 5 | mA | Main terminal Voltage=3V | 4 | ||
| Input Forward current | IF | 60 | mA | 2 | |||
| Reverse voltage | VR | 6 | V | 2 | |||
| Power dissipation (input) | PD | 100 | mW | 2 | |||
| Off-state Output Terminal Voltage (EL306X) | VDRM | 600 | V | 2 | |||
| Peak Repetitive Surge Current | ITSM | 1 | A | pw=1ms, 120pps | 2 | ||
| On-State RMS Current | IT(RMS) | 100 | mA | 2 | |||
| Power dissipation (output) | PC | 300 | mW | 2 | |||
| Total power dissipation | PTOT | 330 | mW | 2 | |||
| Isolation voltage | VISO | 5000 | Vrms | AC for 1 minute, R.H.= 40 ~ 60% R.H. | 2 | ||
| Operating temperature | TOPR | -55 | 100 | ℃ | 2 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 2 | ||
| Soldering Temperature | TSOL | 260 | ℃ | For 10 seconds | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D | 13 |
CAD (KiCad official)
- Symbol:
EL3063M-V - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
el3063m-v-etched.step/el3063m-v-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);el3063m-v.step/el3063m-v.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Everlight Elec datasheet (14 pp, sha256
6d81be5e83846295, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# EL3063M-V
**Everlight Elec** · Triac, SCR Output Optoisolators · DIP-6
EL3063M-V from Everlight Elec, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | LED anode of the GaAs infrared emitting diode; absolute maximum input forward current is 60 mA and recommended IF lies between max IFT (5 mA for EL3063) and 60 mA. |
| 2 | Cathode | passive | LED cathode of the GaAs infrared emitting diode; reverse voltage rating is 6 V. |
| 3 | No Connection | unconnected | Labeled No Connection in the pin configuration; the datasheet assigns no function to this pin. |
| 4 | Terminal | passive | Output terminal of the monolithic zero-crossing photo triac; off-state output terminal voltage VDRM is 250 V for the EL303X series. |
| 5 | Substrate | unconnected | Internal substrate pin, marked do not connect. |
| 6 | Terminal | passive | Output terminal of the monolithic zero-crossing photo triac; on-state RMS current is rated at 100 mA maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Everlight Elec |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Voltage | VF | | | 1.5 | V | IF = 30mA | 3 |
| Reverse Leakage current | IR | | | 10 | µA | VR = 6V | 3 |
| Peak Blocking Current (EL306X) | IDRM1 | | | 500 | nA | VDRM = Rated VDRM, IF = 0 mA | 3 |
| Peak On-state Voltage | VTM | | | 3 | V | ITM=100 mA peak, IF=Rated IFT | 3 |
| Critical Rate of Rise off-state Voltage (EL306X) | dv/dt | 1000 | | | V/µs | VPEAK =Rated VDRM, IF=0 (Fig. 10) | 3 |
| Inhibit Voltage (MT1-MT2 voltage above which device will not trigger) | VINH | | | 20 | V | IF= Rated IFT | 3 |
| Leakage in Inhibited State | IDRM2 | | | 500 | µA | IF= Rated IFT, VDRM=Rated VDRM, off state | 3 |
| LED Trigger Current (EL3063) | IFT | | | 5 | mA | Main terminal Voltage=3V | 4 |
| Input Forward current | IF | | | 60 | mA | | 2 |
| Reverse voltage | VR | | | 6 | V | | 2 |
| Power dissipation (input) | PD | | | 100 | mW | | 2 |
| Off-state Output Terminal Voltage (EL306X) | VDRM | | | 600 | V | | 2 |
| Peak Repetitive Surge Current | ITSM | | | 1 | A | pw=1ms, 120pps | 2 |
| On-State RMS Current | IT(RMS) | | | 100 | mA | | 2 |
| Power dissipation (output) | PC | | | 300 | mW | | 2 |
| Total power dissipation | PTOT | | | 330 | mW | | 2 |
| Isolation voltage | VISO | | | 5000 | Vrms | AC for 1 minute, R.H.= 40 ~ 60% R.H. | 2 |
| Operating temperature | TOPR | -55 | | 100 | ℃ | | 2 |
| Storage temperature | TSTG | -55 | | 125 | ℃ | | 2 |
| Soldering Temperature | TSOL | | | 260 | ℃ | For 10 seconds | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D | 13 |
## CAD (KiCad official)
- Symbol: `EL3063M-V`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `el3063m-v-etched.step` / `el3063m-v-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `el3063m-v.step` / `el3063m-v.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Everlight Elec datasheet](https://en.everlight.com/wp-content/plugins/ItemRelationship/product_files/pdf/EL303X_EL304X_EL306X_EL308X.pdf) (14 pp, sha256 `6d81be5e83846295`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/el3063m-v-datasheet.pdf)