component
EL3061
Public Made by Adomby adom
Everlight Elec Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 9d ago |
| viewers | 9d ago |
| el3061-etched.glb | 9d ago |
| el3061-etched.step | 9d ago |
| el3061-hero.glb | 9d ago |
| el3061-hero.overlay.json | 9d ago |
| el3061.glb | 9d ago |
| el3061.kicad_mod | 9d ago |
| el3061.kicad_sym | 9d ago |
| el3061.lbr | 9d ago |
| el3061.step | 9d ago |
| package.json | 9d ago |
| page.json | 9d ago |
| README.md | 9d ago |
EL3061
Everlight Elec · Triac, SCR Output Optoisolators · DIP-6
EL3061 from Everlight Elec, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | input | LED anode of the GaAs infrared input diode; the datasheet gives a 15 mA maximum trigger current (IFT) for EL3061 and a 60 mA absolute maximum forward current. |
| 2 | Cathode | input | LED cathode of the GaAs infrared input diode; the input forward current must stay between the 15 mA maximum IFT and the 60 mA absolute maximum IF. |
| 3 | No Connection | unconnected | Pin 3 is printed as No Connection in the datasheet pin configuration and should be left unconnected. |
| 4 | Terminal | passive | Output photo-triac terminal (MT, main terminal) of the zero-crossing triac driver; the off-state voltage rating for the EL306X family is 600 V VDRM and the on-state RMS current is limited to 100 mA. |
| 5 | Substrate | unconnected | Substrate pin is marked do not connect and must be left floating. |
| 6 | Terminal | passive | Output photo-triac terminal (MT, main terminal) of the zero-crossing triac driver, paired with pin 4 across the load; the same 600 V VDRM and 100 mA on-state RMS limits apply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Everlight Elec |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Blocking Current (EL306X) | IDRM1 | 500 | nA | VDRM = Rated VDRM, IF = 0 mA | 3 | ||
| Critical Rate of Rise off-state Voltage (EL306X) | dv/dt | 1000 | V/µs | VPEAK = Rated VDRM, IF = 0 (Fig. 10) | 3 | ||
| Input Forward Voltage | VF | 1.5 | V | IF = 30mA | 3 | ||
| Reverse Leakage Current | IR | 10 | µA | VR = 6V | 3 | ||
| Peak On-state Voltage | VTM | 3 | V | ITM=100 mA peak, IF=Rated IFT | 3 | ||
| Inhibit Voltage | VINH | 20 | V | IF= Rated IFT | 3 | ||
| Leakage in Inhibited State | IDRM2 | 500 | µA | IF= Rated IFT, VDRM=Rated VDRM, off state | 3 | ||
| LED Trigger Current (EL3061) | IFT | 15 | mA | Main terminal Voltage=3V | 4 | ||
| Recommended LED operating current range (EL3061, per note *4) | IF | 15 | 60 | mA | Per note *4: IF between max IFT (15 mA for EL3061) and absolute maximum IF (60 mA) | 4 | |
| Input Forward Current | IF | 60 | mA | 2 | |||
| Reverse Voltage | VR | 6 | V | 2 | |||
| Power Dissipation (input) | PD | 100 | mW | 2 | |||
| Derating factor (input, above Ta = 85°C) | 3.8 | mW /°C | Above Ta = 85°C | 2 | |||
| Off-state Output Terminal Voltage (EL306X) | VDRM | 600 | V | 2 | |||
| Peak Repetitive Surge Current | ITSM | 1 | A | pw=1ms, 120pps | 2 | ||
| On-State RMS Current | IT(RMS) | 100 | mA | 2 | |||
| Power Dissipation (output) | PC | 300 | mW | 2 | |||
| Derating factor (output, above Ta = 85°C) | 7.6 | mW/℃ | Above Ta = 85°C | 2 | |||
| Total Power Dissipation | PTOT | 330 | mW | 2 | |||
| Isolation Voltage | VISO | 5000 | Vrms | AC for 1 minute, R.H. = 40 ~ 60% R.H.; pins 1, 2 & 3 shorted, pins 4, 5 & 6 shorted | 2 | ||
| Operating Temperature | TOPR | -55 | 100 | ℃ | 2 | ||
| Storage Temperature | TSTG | -55 | 125 | ℃ | 2 | ||
| Soldering Temperature | TSOL | 260 | ℃ | For 10 seconds | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D | 13 |
CAD (KiCad official)
- Symbol:
EL3061 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
el3061-etched.step/el3061-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);el3061.step/el3061.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Everlight Elec datasheet (14 pp, sha256
6d81be5e83846295, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).