component
EL2630
Public Made by Adomby adom
Everlight Elec Logic Output Optoisolators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEL2630
Everlight Elec · Logic Output Optoisolators · DIP-8
EL2630 from Everlight Elec, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of the input infrared emitting diode, with a maximum forward current IF of 20 mA and a maximum reverse voltage VR of 5 V. |
| 2 | Cathode | passive | Cathode of the input infrared emitting diode; the switching tests use an input current IF of 7.5 mA, with a 3.75 mA threshold used for propagation delay measurement. |
| 3 | Cathode | passive | Second cathode connection of the input infrared emitting diode, internally shorted to pin 2 in the datasheet's absolute maximum isolation test. |
| 4 | Anode | passive | Second anode connection of the input infrared emitting diode, internally shorted to pin 1 in the datasheet's absolute maximum isolation test. |
| 5 | GND | power_in | Ground reference for the photodetector logic output stage; a 0.1 µF bypass capacitor must connect between pins 8 and 5, placed as close to the package as possible. |
| 6 | Vout 2 | output | Logic gate output 2 of the high-speed photodetector, with a maximum output current IO of 50 mA and a maximum output voltage VO of 7.0 V. |
| 7 | Vout 1 | output | Logic gate output 1 of the high-speed photodetector, with a maximum output current IO of 50 mA and a maximum output voltage VO of 7.0 V. |
| 8 | VCC | power_in | Supply voltage for the photodetector and logic output, with an absolute maximum rating of 7.0 V and a 0.1 µF bypass capacitor required to GND (pin 5). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Everlight Elec |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
EL2630 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
el2630-etched.step/el2630-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);el2630.step/el2630.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Everlight Elec datasheet (14 pp, sha256
fa5ca4d46f35cbf9, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).