component
EH-6A
Public Made by Adomby adom
BOOMELE Boom Precision Elec Wire To Board Connector, 插件,P=2.5mm. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
5e994d6
EH-6A
BOOMELE Boom Precision Elec · Wire To Board Connector · JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical
EH-6A from BOOMELE Boom Precision Elec, in a JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BOOMELE Boom Precision Elec |
| Package | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical |
| Category | Connectors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (initial, mated) | 20 | milliohm | Mate connectors, dry circuit, 10mV MAX., 25A (JIS C5402 5.4) | 4 | |||
| Contact resistance on crimped portion | 5 | milliohm | Crimp applicable wire to terminal, dry circuit, 10mV MAX., 25mA | 4 | |||
| Insulation resistance | 100 | megohm | Apply 500V DC between adjacent terminals or terminal and ground (JIS C5402 5.2 / MIL-STD-202 Method 302) | 4 | |||
| Contact resistance after repeated insertion/withdrawal | 40 | milliohm | Up to 30 cycles at 10 cycles per minute | 6 | |||
| Contact resistance after vibration | 40 | milliohm | Amplitude 1.5mm P-P, 10-55-10 Hz in 1 min, 2 hours each X.Y.Z axes (MIL-STD-202 Method 201) | 6 | |||
| Discontinuity during vibration | 1 | microsecond | Amplitude 1.5mm P-P, 10-55-10 Hz in 1 min, 2 hours each X.Y.Z axes (MIL-STD-202 Method 201) | 6 | |||
| Contact resistance after shock | 40 | milliohm | 490 m/s2 {50G}, 3 strokes each X.Y.Z axes (JIS C60068-2-27 / MIL-STD-202 Method 213) | 6 | |||
| Discontinuity during shock | 1 | microsecond | 490 m/s2 {50G}, 3 strokes each X.Y.Z axes (JIS C60068-2-27 / MIL-STD-202 Method 213) | 6 | |||
| Contact resistance after heat resistance | 40 | milliohm | 96 hours at 83 to 87 ℃ (JIS C60068-2-2 / MIL-STD-202 Method 108) | 6 | |||
| Contact resistance after cold resistance | 40 | milliohm | 96 hours at -37 to -43 ℃ (JIS C60068-2-1) | 7 | |||
| Contact resistance after humidity | 40 | milliohm | 96 hours at 58-62 ℃, 90-95% relative humidity (JIS C60068-2-3 / MIL-STD-202 Method 103) | 7 | |||
| Insulation resistance after humidity | 10 | megohm | 96 hours at 58-62 ℃, 90-95% relative humidity (JIS C60068-2-3 / MIL-STD-202 Method 103) | 7 | |||
| Contact resistance after temperature cycling | 40 | milliohm | 5 cycles of -55 ℃ 30 min and +105 ℃ 30 min (JIS C0025) | 7 | |||
| Contact resistance after salt spray | 40 | milliohm | 48 4 hours exposure to salt spray from 5 1% solution at 35 2 (JIS C5028 / MIL-STD-202 Method 101) | 7 | |||
| Contact resistance after SO2 gas | 40 | milliohm | 24 hours exposure to 50 5ppm SO2 gas at 40 2 ℃ | 8 | |||
| Contact resistance after NH3 gas | 40 | milliohm | 40 minutes exposure to NH3 gas evaporating from 28% ammonia solution | 8 | |||
| Temperature rise | 30 | ℃ | Carrying rated current load (UL 498) | 6 | |||
| Rated voltage (MAX.) | 250 | V | Rated Voltage (MAX.) | 2 | |||
| Rated current (MAX.), AWG #22 | 2.5 | A | AWG #22, applicable wires ø1.0mm MAX. insulation O.D. | 2 | |||
| Rated current (MAX.), AWG #32 | 2.5 | A | AWG #32, applicable wires ø1.0mm MAX. insulation O.D. | 2 | |||
| Ambient temperature range | -25 | 85 | ℃ | Includes terminal temperature rise (note *1) | 2 |
CAD (KiCad official)
- Symbol:
EH-6A - Footprint:
Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical - 3D model: JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical (KiCad packages3D, STEP)
- 3D model files:
eh-6a-etched.step/eh-6a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eh-6a.step/eh-6a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BOOMELE Boom Precision Elec datasheet (14 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# EH-6A
**BOOMELE Boom Precision Elec** · Wire To Board Connector · JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical
EH-6A from BOOMELE Boom Precision Elec, in a JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BOOMELE Boom Precision Elec |
| Package | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical |
| Category | Connectors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (initial, mated) | | | | 20 | milliohm | Mate connectors, dry circuit, 10mV MAX., 25A (JIS C5402 5.4) | 4 |
| Contact resistance on crimped portion | | | | 5 | milliohm | Crimp applicable wire to terminal, dry circuit, 10mV MAX., 25mA | 4 |
| Insulation resistance | | 100 | | | megohm | Apply 500V DC between adjacent terminals or terminal and ground (JIS C5402 5.2 / MIL-STD-202 Method 302) | 4 |
| Contact resistance after repeated insertion/withdrawal | | | | 40 | milliohm | Up to 30 cycles at 10 cycles per minute | 6 |
| Contact resistance after vibration | | | | 40 | milliohm | Amplitude 1.5mm P-P, 10-55-10 Hz in 1 min, 2 hours each X.Y.Z axes (MIL-STD-202 Method 201) | 6 |
| Discontinuity during vibration | | | | 1 | microsecond | Amplitude 1.5mm P-P, 10-55-10 Hz in 1 min, 2 hours each X.Y.Z axes (MIL-STD-202 Method 201) | 6 |
| Contact resistance after shock | | | | 40 | milliohm | 490 m/s2 {50G}, 3 strokes each X.Y.Z axes (JIS C60068-2-27 / MIL-STD-202 Method 213) | 6 |
| Discontinuity during shock | | | | 1 | microsecond | 490 m/s2 {50G}, 3 strokes each X.Y.Z axes (JIS C60068-2-27 / MIL-STD-202 Method 213) | 6 |
| Contact resistance after heat resistance | | | | 40 | milliohm | 96 hours at 83 to 87 ℃ (JIS C60068-2-2 / MIL-STD-202 Method 108) | 6 |
| Contact resistance after cold resistance | | | | 40 | milliohm | 96 hours at -37 to -43 ℃ (JIS C60068-2-1) | 7 |
| Contact resistance after humidity | | | | 40 | milliohm | 96 hours at 58-62 ℃, 90-95% relative humidity (JIS C60068-2-3 / MIL-STD-202 Method 103) | 7 |
| Insulation resistance after humidity | | 10 | | | megohm | 96 hours at 58-62 ℃, 90-95% relative humidity (JIS C60068-2-3 / MIL-STD-202 Method 103) | 7 |
| Contact resistance after temperature cycling | | | | 40 | milliohm | 5 cycles of -55 ℃ 30 min and +105 ℃ 30 min (JIS C0025) | 7 |
| Contact resistance after salt spray | | | | 40 | milliohm | 48 4 hours exposure to salt spray from 5 1% solution at 35 2 (JIS C5028 / MIL-STD-202 Method 101) | 7 |
| Contact resistance after SO2 gas | | | | 40 | milliohm | 24 hours exposure to 50 5ppm SO2 gas at 40 2 ℃ | 8 |
| Contact resistance after NH3 gas | | | | 40 | milliohm | 40 minutes exposure to NH3 gas evaporating from 28% ammonia solution | 8 |
| Temperature rise | | | | 30 | ℃ | Carrying rated current load (UL 498) | 6 |
| Rated voltage (MAX.) | | | | 250 | V | Rated Voltage (MAX.) | 2 |
| Rated current (MAX.), AWG #22 | | | | 2.5 | A | AWG #22, applicable wires ø1.0mm MAX. insulation O.D. | 2 |
| Rated current (MAX.), AWG #32 | | | | 2.5 | A | AWG #32, applicable wires ø1.0mm MAX. insulation O.D. | 2 |
| Ambient temperature range | | -25 | | 85 | ℃ | Includes terminal temperature rise (note *1) | 2 |
## CAD (KiCad official)
- Symbol: `EH-6A`
- Footprint: `Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical`
- 3D model: JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical (KiCad packages3D, STEP)
- 3D model files: `eh-6a-etched.step` / `eh-6a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `eh-6a.step` / `eh-6a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [BOOMELE Boom Precision Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887326953525248) (14 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/eh-6a-datasheet.pdf)