component
EG8305
Public Made by Adomby adom
EG Micro Audio Power OpAmps, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
eg8305: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
3262037
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188
{
"schema_version": 1,
"type": "component",
"slug": "eg8305",
"title": "EG8305",
"brief": "EG Micro Audio Power OpAmps, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"op-amp-cmp",
"eg8305"
],
"component": {
"mpn": "EG8305",
"manufacturer": "EG Micro",
"package": "SOP-8",
"pin_count": 8,
"category": "Op-amp/Cmp",
"subcategory": "Audio Power OpAmps",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/bc23d8b478ac275ca5841a1cd2b776b1.pdf",
"parts": {
"symbol": "eg8305.kicad_sym",
"footprint": "eg8305.kicad_mod",
"model_3d": "eg8305-etched.glb",
"model_3d_plain": "eg8305.glb",
"model_3d_step": "eg8305-etched.step",
"model_3d_step_plain": "eg8305.step",
"lbr": "eg8305.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "CTRL",
"type": "input",
"description": "Chip enable / shutdown control input. Pulling this pin high (typ. VIH ≥ 1 V at VDD=5.0 V) enables the amplifier; low (VIL ≤ 0.7 V) puts the device into shutdown (ISD < 1 µA)."
},
{
"number": "2",
"name": "BYPASS",
"type": "input",
"description": "Internal reference / bias bypass capacitor node. Connect a 1 µF ceramic capacitor from this pin to GND to filter the internal mid-rail reference for low-noise operation."
},
{
"number": "3",
"name": "INP",
"type": "input",
"description": "Differential audio input, positive side. AC-couple the audio source through Ci (typ. 0.1 µF) to this pin; internal input resistor Ri ≈ 20 kΩ, external Re typically 30 kΩ to set closed-loop gain up to 25 dB."
},
{
"number": "4",
"name": "INN",
"type": "input",
"description": "Differential audio input, negative side. AC-couple through Ci (typ. 0.1 µF); usually tied to signal ground through the same 30 kΩ / 0.1 µF network as INP for single-ended sources."
},
{
"number": "5",
"name": "VON",
"type": "output",
"description": "Class-D bridge-tied-load (BTL) output, negative side. Drives one terminal of the speaker (4 Ω or 8 Ω). Half of the H-bridge with high-side PMOS / low-side NMOS RDS(on) ≈ 465 mΩ at VDD=5 V."
},
{
"number": "6",
"name": "VDD",
"type": "power_in",
"description": "Supply voltage input, 3.0 V to 5.5 V (absolute max 6.0 V). Decouple with a 1 µF ceramic close to the pin and an additional 10 µF bulk capacitor for low-frequency noise rejection."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device ground. Return for supply decoupling and speaker filter capacitors; connect to the board power ground plane."
},
{
"number": "8",
"name": "VOP",
"type": "output",
"description": "Class-D bridge-tied-load (BTL) output, positive side. Drives the other terminal of the speaker; complements VON to deliver up to 3 W into 4 Ω at 5 V."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/bc23d8b478ac275ca5841a1cd2b776b1.pdf",
"pages": 11,
"sha256": "accdf75a68f48226",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "eg8305.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "eg8305-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7e4bbe346ed01dc5118297d97204abea59edfa78c912349e45efbcdb0458d516",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "EG Micro",
"Package": "SOP-8",
"Category": "Op-amp/Cmp",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"eg8305"
],
"discovery_pitch": "EG8305 (EG Micro) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"eg8305.kicad_sym",
"eg8305.kicad_mod",
"eg8305.glb",
"eg8305.step",
"eg8305.lbr",
"docs/hero.png",
"docs/eg8305-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"eg8305-etched.step"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T20:18:43.004Z"
}