component
EG8305
Public Made by Adomby adom
EG Micro Audio Power OpAmps, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,37 +32,37 @@ "number": "1", "name": "CTRL", "type": "input",- "description": "Chip enable / shutdown control input. Pulling this pin high (typ. VIH \u2265 1 V at VDD=5.0 V) enables the amplifier; low (VIL \u2264 0.7 V) puts the device into shutdown (ISD < 1 \u00b5A)."+ "description": "Chip enable / shutdown control input. Pulling this pin high (typ. VIH ≥ 1 V at VDD=5.0 V) enables the amplifier; low (VIL ≤ 0.7 V) puts the device into shutdown (ISD < 1 µA)." }, { "number": "2", "name": "BYPASS", "type": "input",- "description": "Internal reference / bias bypass capacitor node. Connect a 1 \u00b5F ceramic capacitor from this pin to GND to filter the internal mid-rail reference for low-noise operation."+ "description": "Internal reference / bias bypass capacitor node. Connect a 1 µF ceramic capacitor from this pin to GND to filter the internal mid-rail reference for low-noise operation." }, { "number": "3", "name": "INP", "type": "input",- "description": "Differential audio input, positive side. AC-couple the audio source through Ci (typ. 0.1 \u00b5F) to this pin; internal input resistor Ri \u2248 20 k\u03a9, external Re typically 30 k\u03a9 to set closed-loop gain up to 25 dB."+ "description": "Differential audio input, positive side. AC-couple the audio source through Ci (typ. 0.1 µF) to this pin; internal input resistor Ri ≈ 20 kΩ, external Re typically 30 kΩ to set closed-loop gain up to 25 dB." }, { "number": "4", "name": "INN", "type": "input",- "description": "Differential audio input, negative side. AC-couple through Ci (typ. 0.1 \u00b5F); usually tied to signal ground through the same 30 k\u03a9 / 0.1 \u00b5F network as INP for single-ended sources."+ "description": "Differential audio input, negative side. AC-couple through Ci (typ. 0.1 µF); usually tied to signal ground through the same 30 kΩ / 0.1 µF network as INP for single-ended sources." }, { "number": "5", "name": "VON", "type": "output",- "description": "Class-D bridge-tied-load (BTL) output, negative side. Drives one terminal of the speaker (4 \u03a9 or 8 \u03a9). Half of the H-bridge with high-side PMOS / low-side NMOS RDS(on) \u2248 465 m\u03a9 at VDD=5 V."+ "description": "Class-D bridge-tied-load (BTL) output, negative side. Drives one terminal of the speaker (4 Ω or 8 Ω). Half of the H-bridge with high-side PMOS / low-side NMOS RDS(on) ≈ 465 mΩ at VDD=5 V." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Supply voltage input, 3.0 V to 5.5 V (absolute max 6.0 V). Decouple with a 1 \u00b5F ceramic close to the pin and an additional 10 \u00b5F bulk capacitor for low-frequency noise rejection."+ "description": "Supply voltage input, 3.0 V to 5.5 V (absolute max 6.0 V). Decouple with a 1 µF ceramic close to the pin and an additional 10 µF bulk capacitor for low-frequency noise rejection." }, { "number": "7",@@ -74,7 +74,7 @@ "number": "8", "name": "VOP", "type": "output",- "description": "Class-D bridge-tied-load (BTL) output, positive side. Drives the other terminal of the speaker; complements VON to deliver up to 3 W into 4 \u03a9 at 5 V."+ "description": "Class-D bridge-tied-load (BTL) output, positive side. Drives the other terminal of the speaker; complements VON to deliver up to 3 W into 4 Ω at 5 V." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/eg8305-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }