EG6599

{
  "slug": "eg6599",
  "version": "0.1.0",
  "type": "component",
  "description": "EG Micro AC-DC Controllers And Regulators, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "eg6599",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "eg6599.kicad_sym",
    "eg6599.kicad_mod",
    "eg6599.glb",
    "eg6599.step",
    "eg6599.lbr",
    "docs/hero.png",
    "docs/eg6599-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "eg6599-hero.glb",
    "eg6599-hero.overlay.json",
    "eg6599-etched.glb"
  ],
  "component": {
    "mpn": "EG6599",
    "manufacturer": "EG Micro",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884813688684544",
    "parts": {
      "symbol": "eg6599.kicad_sym",
      "footprint": "eg6599.kicad_mod",
      "model_3d": "eg6599-hero.glb",
      "model_3d_plain": "eg6599-etched.glb",
      "model_3d_step": "eg6599-etched.step",
      "model_3d_step_plain": "eg6599.step",
      "lbr": "eg6599.lbr"
    },
    "distributor_links": {
      "lcsc": "C481167"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T06:03:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CSS",
        "type": "output",
        "description": "Soft-start capacitor node that is discharged when VCC is below UVLO, LINE is below 1.25 V or above 6 V, DIS is above 1.85 V, ISEN is above 1.5 V, or DELAY is above 3.5 V."
      },
      {
        "number": "2",
        "name": "DELAY",
        "type": "output",
        "description": "Overcurrent delay node: above 2 V it fully discharges the soft-start capacitor to drive maximum frequency, the IC shuts down internally above 3.5 V, and it restarts when the voltage falls below 0.3 V."
      },
      {
        "number": "3",
        "name": "CF",
        "type": "output",
        "description": "Connection for the external oscillator timing capacitor."
      },
      {
        "number": "4",
        "name": "RFMIN",
        "type": "input",
        "description": "Minimum oscillator frequency setting pin that provides a 2 V reference, with about 2 mA source capability, and is also used for the soft-start network."
      },
      {
        "number": "5",
        "name": "STBY",
        "type": "input",
        "description": "Burst-mode input: below 1.25 V the IC enters a low-power idle state, above 1.25 V it operates normally, and it should be tied to RFMIN if burst mode is not used."
      },
      {
        "number": "6",
        "name": "ISEN",
        "type": "input",
        "description": "Current sense input: above 0.8 V it discharges the soft-start capacitor and triggers frequency shift, and above 1.5 V the IC enters a low-power state that requires a VCC restart to clear the latch."
      },
      {
        "number": "7",
        "name": "LINE",
        "type": "input",
        "description": "High-line voltage detection input: below 1.25 V the IC enters a low-power state, and if the function is unused it should be biased between 1.25 V and 6 V."
      },
      {
        "number": "8",
        "name": "DIS",
        "type": "input",
        "description": "Latched disable input: above 1.85 V the IC enters a low-power state that requires a VCC restart to clear the latch, and it should be connected to GND if unused."
      },
      {
        "number": "9",
        "name": "PFC_STOP",
        "type": "output",
        "description": "Open-collector PFC drain control output that is pulled low when DIS > 1.85 V, ISEN > 1.5 V, LINE > 6 V, STBY < 1.25 V or DELAY > 2 V, and should be left floating if unused."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground terminal."
      },
      {
        "number": "11",
        "name": "LVG",
        "type": "output",
        "description": "Low-side gate drive output with 0.3 A source and 0.8 A sink peak drive capability."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Chip supply input; the datasheet gives a 25 V absolute maximum and a typical operating range of 7.5 V to 20 V with 15 V typical."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; leave floating."
      },
      {
        "number": "14",
        "name": "OUT",
        "type": "output",
        "description": "High-side driver floating ground (half-bridge switching node), with an absolute range of VBOOT-25 V to VBOOT+0.3 V."
      },
      {
        "number": "15",
        "name": "HVG",
        "type": "output",
        "description": "High-side gate drive output with 0.3 A source and 0.8 A sink peak drive capability."
      },
      {
        "number": "16",
        "name": "VBOOT",
        "type": "power_in",
        "description": "High-side floating supply input, with an absolute maximum rating of 600 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet calls OUT the 'high-side driver floating ground' and lists its type as O (output). It ; The pin-diagram text in the datasheet (Figure 4-1) is garbled, so pin numbers were taken from the pi; Section 8.2 describes PFC_STOP as an open-collector output, while section 4.2 types it as O. The typ"
        ],
        "pages_sent": 22,
        "cost_usd": 0.08,
        "at": "2026-10-18T05:57:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884813688684544",
        "pages": 22,
        "sha256": "988183c67796ee47",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "eg6599.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "eg6599-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c088ee10fc42d0bfa6ce1866b1c16248b06d2a1ddd5c0576dc1b9eac8b78d1bb",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}