EG6562

{
  "slug": "eg6562",
  "version": "0.1.0",
  "type": "component",
  "description": "EG Micro AC-DC Controllers And Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "eg6562",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "eg6562.kicad_sym",
    "eg6562.kicad_mod",
    "eg6562.glb",
    "eg6562.step",
    "eg6562.lbr",
    "docs/hero.png",
    "docs/eg6562-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "eg6562-hero.glb",
    "eg6562-hero.overlay.json",
    "eg6562-etched.glb"
  ],
  "component": {
    "mpn": "EG6562",
    "manufacturer": "EG Micro",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/502148d0cd6d0b296d999f9184652d71.pdf",
    "parts": {
      "symbol": "eg6562.kicad_sym",
      "footprint": "eg6562.kicad_mod",
      "model_3d": "eg6562-hero.glb",
      "model_3d_plain": "eg6562-etched.glb",
      "model_3d_step": "eg6562-etched.step",
      "model_3d_step_plain": "eg6562.step",
      "lbr": "eg6562.lbr"
    },
    "distributor_links": {
      "lcsc": "C6150392"
    },
    "distributor_check": {
      "checked_at": "2026-11-04T23:54:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "INV",
        "type": "input",
        "description": "Error amplifier inverting input, compared against the internal 2.5V reference; the output is disabled when INV falls below 0.2V and re-enabled above 0.45V."
      },
      {
        "number": "2",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output, with a high level of 5.2V typical (5 to 6V) and a low level of 2.25V."
      },
      {
        "number": "3",
        "name": "MULT",
        "type": "input",
        "description": "Multiplier input with a linear operating range of 0 to 3V and an input current of 1uA."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for cycle-by-cycle current limit, with a 1.08V typical comparison voltage and 200ns leading-edge blanking."
      },
      {
        "number": "5",
        "name": "ZCD",
        "type": "input",
        "description": "Zero-current detector input that triggers when the voltage falls below 0.7V, with a 1.4V rising-edge threshold and internal clamps at 5.7V high and 0V low."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground."
      },
      {
        "number": "7",
        "name": "GD",
        "type": "output",
        "description": "Totem-pole gate drive output for the power switch, rated 0.8A source and 0.8A sink with an 18V maximum output clamp."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Chip supply with an operating range of 10.5V to 30V, UVLO turn-on threshold of 12.5V typical and turn-off threshold of 9.7V typical, and a 30V zener clamp at 10mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers both SOP8 and DIP8 packages and gives one pin table (page 5) without stating wh"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0402,
        "at": "2026-11-04T23:53:48"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/502148d0cd6d0b296d999f9184652d71.pdf",
        "pages": 19,
        "sha256": "b6cdb56a681188d1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "eg6562.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-04",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "eg6562-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b0adc7c4f968b2882a2de04d36b320f2d8b5ff495a0b2cd44f361f6f421f2f4f",
        "checked": "2026-11-04",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}