component

EG393

Public Made by Adom

by adom

EG Micro Comparators, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpeg393
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs eg393: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
eg393-etched.fit.json eg393: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg393-etched.glb eg393: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
eg393-etched.step eg393: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
eg393.glb Publish 0.1.0 · Ray
eg393.kicad_mod Publish 0.1.0 · Ray
eg393.kicad_sym Publish 0.1.0 · Ray
eg393.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
eg393.step Publish 0.1.0 · Ray
package.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json eg393: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray
README.md eg393: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

EG393

EG Micro · Comparators · SOP-8

EG393 from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Open-collector output of comparator A. Requires an external pull-up resistor to a supply rail (typ. 3k-100k). Can sink up to 16mA; absolute-max output-to-ground short-circuit current 20mA.
2 -INA input Inverting input of comparator A. Input common-mode range 0V to Vcc−1.5V; input bias current typ. 25nA, offset current typ. ±5nA.
3 +INA input Non-inverting input of comparator A. Input common-mode range extends down to ground and up to Vcc−1.5V.
4 GND power_in Ground / negative supply reference (V-). Tied to 0V in single-supply operation, or to the negative rail (down to −18V) in dual-supply operation.
5 +INB input Non-inverting input of comparator B. Input common-mode range extends down to ground and up to Vcc−1.5V.
6 -INB input Inverting input of comparator B. Input bias current typ. 25nA; input offset voltage typ. 1.0mV.
7 OUTB output Open-collector output of comparator B. Requires an external pull-up resistor to a supply rail. Can be wired-OR'd with OUTA on a shared pull-up. Sink current up to 16mA.
8 VCC power_in Positive supply. Single-supply range 2.0V to 36V, or +1V to +18V in split-supply operation. Typical quiescent current 0.8mA (independent of Vcc). No bypass capacitor is required for the bias network but standard decoupling is recommended.

Key specifications

Parameter Value
Manufacturer EG Micro
Package SOP-8
Category Op-amp/Cmp
Pins 8

CAD (KiCad official)

  • Symbol: EG393
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: eg393-etched.step / eg393-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eg393.step / eg393.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: EG Micro datasheet (11 pp, sha256 a17ae2ce7eb64a53, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF