main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs eg3012s: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers eg3012s: viewers · Ray
eg3012s-etched.fit.json eg3012s: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg3012s-etched.glb eg3012s: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg3012s-etched.step eg3012s: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg3012s.glb Publish 0.1.0 · Ray
eg3012s.kicad_mod Publish 0.1.0 · Ray
eg3012s.kicad_sym Publish 0.1.0 · Ray
eg3012s.lbr Publish 0.1.0 · Ray
eg3012s.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json eg3012s: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md eg3012s: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

EG3012S

EG Micro · Isolators - Gate Drivers · SOP-8

EG3012S from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Low-side supply input. Recommended operating voltage 12V-15V (range 11V-30V). Bypass with a 0.1µF ceramic capacitor to GND close to the pin. UVLO turn-on ~10V, turn-off ~9.5V.
2 HIN input High-side logic input, active high. '1' turns the high-side MOSFET on (HO high), '0' turns it off. Has an internal 15kΩ (10kΩ per description) pull-down so an open input defaults the high-side off. VIH ≥ 2.5V, VIL ≤ 1.0V.
3 LIN input Low-side logic input, active high. '1' turns the low-side MOSFET on (LO high), '0' turns it off. Internal ~15kΩ pull-down defaults the low-side off when input is floating. VIH ≥ 2.5V, VIL ≤ 1.0V.
4 GND power_in Device ground reference. Logic ground and analog ground are internally tied together and return here.
5 LO output Low-side gate drive output. Totem-pole push-pull, referenced to GND. Drives the gate of the low-side N-channel MOSFET/IGBT. Peak source ~0.8A / sink ~1A (PW ≤ 10µs).
6 VS power_in High-side floating return / switch node. Connects to the source of the high-side MOSFET; forms the negative terminal of the bootstrap capacitor between VB and VS. Absolute range −0.7V to +80V.
7 HO output High-side gate drive output. Totem-pole push-pull referenced to VS, swinging between VS and VB. Drives the gate of the high-side N-channel MOSFET/IGBT. Peak source ~0.8A / sink ~1A.
8 VB power_in High-side floating bootstrap supply. Connect the bootstrap capacitor between VB and VS; charged from VCC through an external (or internal) diode when the low-side is on. Absolute max 90V referenced to GND.

Key specifications

Parameter Value
Manufacturer EG Micro
Package SOP-8
Category PMIC
Pins 8

CAD (KiCad official)

  • Symbol: EG3012S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: eg3012s-etched.step / eg3012s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eg3012s.step / eg3012s.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
eg3012s.step 122 KB You want the bare part, or you mark your own boards.
eg3012s-etched.step 1.9 MB You want the part with EG3012S already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 450 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: EG Micro datasheet (13 pp, sha256 50b05dbc8acf897a, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF