component
EG301
Public Made by Adomby adom
EG Micro Interface - Specialized, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEG301
EG Micro · Interface - Specialized · SOIC-8
EG301 from EG Micro, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0 | input | Key input pin 0 for the button matrix, with an internal pull-down of 40 to 80 kΩ (typ. 60 kΩ). |
| 2 | S1 | input | Key input pin 1 for the button matrix, with an internal pull-down of 40 to 80 kΩ (typ. 60 kΩ). |
| 3 | S2 | input | Key input pin 2, which also serves as the programming clock input (S2 or S3 acts as the serial clock in programming mode), with an internal pull-down of 40 to 80 kΩ. |
| 4 | S3 | input | Key input pin 3, which also serves as the programming clock input (S3 may be used in place of S2 as the serial clock), with an internal pull-down of 40 to 80 kΩ. |
| 5 | VSS | power_in | Ground pin; the datasheet requires VSS to be connected to ground. |
| 6 | PWM | bidirectional | Programming data input/output and rolling-code signal output pin, with an internal pull-down of 25 to 40 kΩ (typ. 30 kΩ). |
| 7 | /LED | output | Chip working LED indicator output pin that drives an external LED (active low by its /LED naming). |
| 8 | VDD | power_in | Power supply input pin; the operating supply range is 3.5 V to 13.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | -0.3 | 13 | V | 8 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 8 | ||
| Normal operating temperature | TWORK | -40 | 100 | ℃ | 8 | ||
| Lead soldering temperature | TLSOL | 300 | ℃ | 8 | |||
| ESD rating | VESD | 3000 | V | 8 | |||
| Average operating current | ICC | 0.5 | 0.8 | mA | VDD=3.5V; 3.5V<VDD<13.0V (table header) | 8 | |
| Average operating current | ICC | 0.7 | 1.5 | mA | VDD=6.6V; 3.5V<VDD<13.0V (table header) | 8 | |
| Average operating current | ICC | 1.1 | 2.3 | mA | VDD=13.0V; 3.5V<VDD<13.0V (table header) | 8 | |
| Static current | ICCS | 0.5 | 1 | uA | 3.5V<VDD<13.0V (table header) | 9 | |
| Low-level input voltage | VIL | -0.3 | V | 3.5V<VDD<13.0V (table header) | 9 | ||
| LED sink current | ILED | 2.5 | 2.7 | 3.3 | mA | VDD=6.6V | 9 |
| LED sink current | ILED | 3.1 | 4.3 | 4.5 | mA | VDD=13.0V | 9 |
| S0-S3 pull-down resistance | RS0-3 | 40 | 60 | 80 | kΩ | 9 | |
| PWM pull-down resistance | RPWM | 25 | 30 | 40 | kΩ | 9 | |
| Programming mode setup time | Tps | 3.5 | 4.5 | ms | VDD=12V, T=25℃ (programming/verify timing table) | 6 | |
| Hold time 1 | Tph1 | 3.5 | ms | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Hold time 2 | Tph2 | 50 | us | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Programming preparation time | Tpbw | 4 | ms | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Programming cycle time | Twc | 50 | ms | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Clock low time | Tclkl | 50 | us | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Clock high time | Tclkh | 50 | us | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Data setup time | Tds | 0 | us | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Data hold time | Tdh | 30 | us | VDD=12V, T=25℃ (programming/verify timing table) | 6 | ||
| Data output valid time | Tdv | 30 | us | VDD=12V, T=25℃ (programming/verify timing table) | 6 |
CAD (KiCad official)
- Symbol:
EG301 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
eg301-etched.step/eg301-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg301.step/eg301.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (10 pp, sha256
0354034167eb0c42, retrieved 2026-10-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).