component
eg3002
Public Made by Adomby adom
EG Micro Isolators - Gate Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
main
Ray
eg3002: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
be4e9ac
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "eg3002",
"version": "0.1.0",
"type": "component",
"description": "EG Micro Isolators - Gate Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"eg3002"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"eg3002.kicad_sym",
"eg3002.kicad_mod",
"eg3002.glb",
"eg3002.step",
"eg3002.lbr",
"docs/hero.png",
"docs/eg3002-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"eg3002-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "EG3002",
"manufacturer": "EG Micro",
"package": "SOP-8",
"pin_count": 8,
"category": "Isolators - Gate Drivers",
"parts": {
"symbol": "eg3002.kicad_sym",
"footprint": "eg3002.kicad_mod",
"model_3d": "eg3002-etched.glb",
"model_3d_plain": "eg3002.glb",
"model_3d_step": "eg3002-etched.step",
"model_3d_step_plain": "eg3002.step",
"lbr": "eg3002.lbr"
},
"pins": [
{
"number": "1",
"name": "VCP-",
"type": "input",
"description": "Inverting input of the internal fast comparator. Used with VCP+ to sense a current-shunt voltage for short-circuit / overcurrent protection; when VCP- > VCP+ the driver output follows IN, when VCP- < VCP+ the output is forced low. Input range -0.3V to VCC+0.3V."
},
{
"number": "2",
"name": "VCP+",
"type": "input",
"description": "Non-inverting input of the internal fast comparator. Typically tied to a reference (~0.1V) for shunt-based overcurrent sensing. Input range -0.3V to VCC+0.3V; input offset voltage ~1mV typ (10mV max), bias current ~0.3µA typ."
},
{
"number": "3",
"name": "IN",
"type": "input",
"description": "Logic drive input controlling turn-on/turn-off of the external power MOSFET. High (VIH ≥ 2.5V, typ 5V, up to 30V) turns the MOSFET on; low (VIL ≤ 1.0V) turns it off. Input current ~200µA typ at Vin=5V (logic 1), ~0µA at logic 0. Absolute range -0.3V to VCC+0.3V (pin tolerates up to +30V per features list)."
},
{
"number": "4",
"name": "SD",
"type": "input",
"description": "Shutdown / output-disable control. Logic '0' enables the driver output; logic '1' forces the output low and disables the driver. Implements cycle-by-cycle shutdown for short-circuit / overcurrent protection: after a shutdown, the output stays off until IN transitions low-to-high again. VIH ≥ 2.5V, VIL ≤ 1.0V; input current ~210µA typ at 5V."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Common ground for input and output stages. Must be routed close to the source terminal of the driven MOSFET to minimize gate-loop inductance."
},
{
"number": "6",
"name": "OUTS",
"type": "output",
"description": "Sink (pull-down) driver output for the external MOSFET gate. Sinks up to 1.2A peak (PW ≤ 10µs). Typically tied to OUTD through a turn-off resistor to independently set the MOSFET gate fall time. Absolute range -0.3V to 35V."
},
{
"number": "7",
"name": "OUTD",
"type": "output",
"description": "Source (pull-up) driver output for the external MOSFET gate. Sources up to 1A peak (PW ≤ 10µs). Typically tied to OUTS through a turn-on resistor to independently set the MOSFET gate rise time. Absolute range -0.3V to 35V."
},
{
"number": "8",
"name": "Vcc",
"type": "power_in",
"description": "Chip supply and MOSFET gate-drive supply. Operating range 3V-30V (recommended 8V-20V for driving N-channel power MOSFETs); absolute max 35V. Quiescent current ~2mA typ (3.5mA max) at 12V with input floating. Bypass with a local ceramic (and bulk) capacitor to GND."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C5267392",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T18:57:13Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "eg3002.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "eg3002-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c8aab16d2f13f781a226c2666644d6733578da57779999a2ea81a5f6cff4c3db",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}