component
EG2183Q
Public Made by Adomby adom
EG Micro Gate Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEG2183Q
EG Micro · Gate Drivers · SOP-8
EG2183Q from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HIN | input | High-side logic input, active high, controls the HO output; the datasheet gives a high-level threshold of at least 2.8 V and a low-level threshold of at most 1.3 V, with an internal 250K pull-down. |
| 2 | LIN | input | Low-side logic input, active low, controls the LO output (LIN low turns the low-side MOSFET on); the datasheet says it has an internal pull-up to high level so the outputs are off when the input floats, without giving a resistor value. |
| 3 | GND | power_in | Chip ground reference for the logic and low-side driver. |
| 4 | LO | output | Low-side gate driver output for the external low-side N-channel MOSFET or IGBT, rated IO+ 2 A source and IO- 2.5 A sink (pulse width 10 µs or less for sink). |
| 5 | VCC | power_in | Low-side supply input operating at 10 V to 20 V, to be bypassed with a high-frequency 0.1 µF capacitor; absolute maximum is 20 V. |
| 6 | VS | power_in | High-side floating ground (switch node) reference for the HO driver; the datasheet limits it to VB−20 V to VB+0.3 V. The datasheet labels this pin as O (output), which is unusual for a floating reference. |
| 7 | HO | output | High-side gate driver output referenced to VS for the external high-side N-channel MOSFET or IGBT, limited to VS−0.3 V to VB+0.3 V, with the same 2 A source and 2.5 A sink capability. |
| 8 | VB | power_in | High-side floating bootstrap supply, rated up to 650 V absolute maximum, fed from VCC through an external bootstrap diode and capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
EG2183Q - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
eg2183q-etched.step/eg2183q-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg2183q.step/eg2183q.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (12 pp, sha256
1b574086481d6aca, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).