component
EG2136
Public Made by Adomby adom
EG Micro Motor Driver ICs, SOP-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEG2136
EG Micro · Motor Driver ICs · SOP-28-300mil
EG2136 from EG Micro, in a SOP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low-side supply voltage, operating range 10V to 20V (absolute max 25V). |
| 2 | HIN1 | input | High-side logic input for channel 1, active low (inverting), -0.3V to 6V, 3.0V min high / 0.8V max low. |
| 3 | HIN2 | input | High-side logic input for channel 2, active low (inverting), -0.3V to 6V, 3.0V min high / 0.8V max low. |
| 4 | HIN3 | input | High-side logic input for channel 3, active low (inverting), -0.3V to 6V, 3.0V min high / 0.8V max low. |
| 5 | LIN1 | input | Low-side logic input for channel 1, active low (inverting), -0.3V to 6V, 3.0V min high / 0.8V max low. |
| 6 | LIN2 | input | Low-side logic input for channel 2, active low (inverting), -0.3V to 6V, 3.0V min high / 0.8V max low. |
| 7 | LIN3 | input | Low-side logic input for channel 3, active low (inverting), -0.3V to 6V, 3.0V min high / 0.8V max low. |
| 8 | FAULT | output | Fault indication output (active low) for overcurrent or low-side undervoltage lockout, with 50-100 ohm typical on-resistance. |
| 9 | ITRIP | input | Overcurrent protection input with 0.46V typical threshold (0.37V to 0.55V) and 0V to 6V input range. |
| 10 | EN | input | Enable input that shuts off all six outputs when pulled low (0V to 6V input range, 0.8V/3.0V thresholds). |
| 11 | RCIN | bidirectional | External RC connection that sets the fault clear delay, with 8V typical threshold and 3V hysteresis. |
| 12 | VSS | power_in | Logic ground (listed as input in datasheet), allowed range VCC-25V to VCC+0.3V relative to COM. |
| 13 | COM | power_in | Low-side gate drive common (ground reference for all voltages). |
| 14 | LO3 | output | Low-side gate driver output for channel 3, -0.3V to VCC+0.3V, +0.2A/-0.35A drive. |
| 15 | LO2 | output | Low-side gate driver output for channel 2, -0.3V to VCC+0.3V, +0.2A/-0.35A drive. |
| 16 | LO1 | output | Low-side gate driver output for channel 1, -0.3V to VCC+0.3V, +0.2A/-0.35A drive. |
| 17 | NC | unconnected | No connection. |
| 18 | VS3 | power_in | High-side floating offset (return) voltage for channel 3, VB3-25V to VB3+0.3V. |
| 19 | HO3 | output | High-side gate driver output for channel 3, VS3-0.3V to VB3+0.3V. |
| 20 | VB3 | power_in | High-side floating absolute supply voltage for channel 3, -0.3V to 600V. |
| 21 | NC | unconnected | No connection. |
| 22 | VS2 | power_in | High-side floating offset (return) voltage for channel 2, VB2-25V to VB2+0.3V. |
| 23 | HO2 | output | High-side gate driver output for channel 2, VS2-0.3V to VB2+0.3V. |
| 24 | VB2 | power_in | High-side floating absolute supply voltage for channel 2, -0.3V to 600V. |
| 25 | NC | unconnected | No connection. |
| 26 | VS1 | power_in | High-side floating offset (return) voltage for channel 1, VB1-25V to VB1+0.3V. |
| 27 | HO1 | output | High-side gate driver output for channel 1, VS1-0.3V to VB1+0.3V. |
| 28 | VB1 | power_in | High-side floating absolute supply voltage for channel 1, -0.3V to 600V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-28-300mil |
| Category | Power Management ICs |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage | VB | -0.3 | 600 | V | TA=25°C, referenced to COM | 7 | |
| High-side floating offset voltage | VS | -25 | 0.3 | V | VB1,2,3-25 to VB1,2,3+0.3 (offsets relative to VB) | 7 | |
| High-side output voltage | HO | -0.3 | 0.3 | V | VS1,2,3-0.3 to VB1,2,3+0.3 (relative to VS/VB) | 7 | |
| Low-side output voltage | LO | -0.3 | 0.3 | V | -0.3 to VCC+0.3 (max relative to VCC) | 7 | |
| Supply voltage | VCC | -0.3 | 25 | V | 8 | ||
| Ground VSS | VSS | -25 | 0.3 | V | VCC-25 to VCC+0.3 (relative to VCC) | 8 | |
| High-side logic input | HIN1,2,3 | -0.3 | 6 | V | 8 | ||
| Low-side logic input | LIN1,2,3 | -0.3 | 6 | V | 8 | ||
| RCIN input voltage | VRCIN | -0.3 | 0.3 | V | VSS-0.3 to VCC+0.3 (relative) | 8 | |
| FAULT input voltage | VFAULT | -0.3 | 0.3 | V | VSS-0.3 to VCC+0.3 (relative) | 8 | |
| EN input voltage | EN | 0 | 6 | V | VSS to 6 | 8 | |
| ITRIP input voltage | ITRIP | 0 | 6 | V | VSS to 6 | 8 | |
| Ambient temperature | TA | -40 | 125 | °C | 8 | ||
| Storage temperature | Tstr | -55 | 150 | °C | 8 | ||
| Soldering temperature | TL | 300 | °C | T=10S | 8 | ||
| Supply voltage | VCC | 10 | 20 | V | 8 | ||
| Input logic high | VIH | 3 | V | HIN1,2,3=LIN1,2,3 | 8 | ||
| Input logic low | VIL | 0.8 | V | HIN1,2,3=LIN1,2,3 | 8 | ||
| EN enable voltage | VTH+ | 3 | V | 8 | |||
| EN enable voltage | VTH- | 0.8 | V | 8 | |||
| ITRIP overcurrent threshold | VITTH | 0.37 | 0.46 | 0.55 | V | 8 | |
| ITRIP hysteresis | VITHYS | 0.07 | V | 8 | |||
| RCIN threshold | VRCINTH | 8 | V | 8 | |||
| RCIN hysteresis | VRCINHYS | 3 | V | 8 | |||
| VCC/VBS UV reset voltage | VCCUV+/VBSUV+ | 8 | 8.9 | 9.8 | V | 8 | |
| VCC/VBS UV detect voltage | VCCUV-/VBSUV- | 7.4 | 8.2 | 9 | V | 8 | |
| VCC/VBS UV hysteresis | VCCUVH/VBSUVH | 0.3 | 0.7 | V | 8 | ||
| Quiescent current | Icc | 1 | 1.5 | mA | VIN=5, VCC=15V | 8 | |
| VBS quiescent current | IBS | 30 | uA | VIN=5 | 9 | ||
| Floating supply leakage current | ILK | 50 | uA | VB1,2,3=VS1,2,3=600V | 9 | ||
| EN disable current | IEN | 1 | uA | VEN=0 | 9 | ||
| Output source current | IO+ | 200 | mA | Vo=0V,VIN=VIH PW≤10uS | 9 | ||
| Output sink current | IO- | 350 | mA | Vo=12V,VIN=VIL PW≤10uS | 9 | ||
| High-level output voltage | VOH | 14.2 | V | IO=25 mA | 9 | ||
| Low-level output voltage | VOL | 0.2 | V | IO=25 mA | 9 | ||
| RCIN on-resistance | RONRCIN | 50 | 100 | Ω | 9 | ||
| FAULT on-resistance | RONFAULT | 50 | 100 | Ω | 9 | ||
| Output rise time | tr | 125 | 190 | nS | 9 | ||
| Output fall time | tf | 50 | 75 | nS | 9 | ||
| Turn-on delay | ton | 300 | 425 | 550 | nS | 9 | |
| Turn-off delay | toff | 250 | 400 | 550 | nS | 9 | |
| EN disable delay | tEN | 300 | 450 | 600 | nS | VIN,VEN=0V 或 5V | 9 |
| ITRIP overcurrent delay | tITRIP | 500 | 750 | 1000 | nS | VITRIP=5V | 9 |
| ITRIP leading edge blanking | tbl | 100 | 150 | nS | VIN=0V或5V ,VITRIP=5V | 9 | |
| ITRIP to FAULT delay | tFLT | 400 | 600 | 800 | nS | VIN=0V或5V ,VITRIP=5V | 9 |
| Input filter time | tFILIN | 100 | 200 | nS | VIN=0V 或 5V | 9 | |
| RCIN reset time | tFLTCLR | 1.3 | 1.65 | 2 | mS | VIN=0V或5V ,VITRIP=0V | 9 |
| Dead time | DT | 220 | 290 | 360 | nS | VIN=0V 或 5V | 9 |
| High/low-side delay matching | MT | 40 | 75 | nS | 9 | ||
| Three-channel on/off delay matching | MDT | 25 | 70 | nS | 9 | ||
| Input/output pulse width matching | PM | 40 | 75 | nS | /pwin-pwout/ | 9 |
CAD (KiCad official)
- Symbol:
EG2136 - Footprint:
Package_SO:SOP-28_8.4x18.16mm_P1.27mm - 3D model: SOP-28-300mil (KiCad packages3D, STEP)
- 3D model files:
eg2136-etched.step/eg2136-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg2136.step/eg2136.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (13 pp, sha256
dd966beb1e7729a1, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).