component
EG2125
Public Made by Adomby adom
EG Micro Gate Drivers, SSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| eg2125-etched.glb | 8d ago |
| eg2125-etched.step | 8d ago |
| eg2125-hero.glb | 8d ago |
| eg2125-hero.overlay.json | 8d ago |
| eg2125.glb | 8d ago |
| eg2125.kicad_mod | 8d ago |
| eg2125.kicad_sym | 8d ago |
| eg2125.lbr | 8d ago |
| eg2125.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
EG2125
EG Micro · Gate Drivers · SSOP-24
EG2125 from EG Micro, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HIN1 | input | Channel 1 high-side logic input, active high, turns the high-side MOSFET on (HO1 high) when set to 1 and off when set to 0, with an internal 250 kΩ pull-down so the output is off when the input floats. |
| 2 | SD1 | bidirectional | Active-low shutdown for channel 1 that forces LO1 and HO1 low regardless of HIN1 and LIN1; the datasheet lists this pin as I/O. |
| 3 | LIN1 | input | Channel 1 low-side logic input, active high, turns the low-side MOSFET on (LO1 high) when set to 1 and off when set to 0, with an internal 250 kΩ pull-down. |
| 4 | CINN1 | input | Negative input of comparator 1 (over-current detection). |
| 5 | CINP1 | input | Positive input of comparator 1 (over-current detection); comparator input range is 0.1 V to VCC. |
| 6 | LO1 | output | Channel 1 low-side gate driver output for the low-side power MOSFET, rated for 0.8 A source and 1.3 A sink peak (pulse width ≤10 µs). |
| 7 | VCC | power_in | Supply input for the chip, 10 V to 20 V, which should be decoupled with a high-frequency bypass capacitor close to the pin. |
| 8 | NC | unconnected | No connection; leave floating. |
| 9 | NC | unconnected | No connection; leave floating. |
| 10 | VS2 | power_in | Floating high-side ground reference for channel 2 (high-side source node). |
| 11 | HO2 | output | Channel 2 high-side gate driver output for the high-side power MOSFET, rated for 0.8 A source and 1.3 A sink peak (pulse width ≤10 µs). |
| 12 | VB2 | power_in | Floating high-side bootstrap supply for channel 2, referenced to VS2. |
| 13 | HIN2 | input | Channel 2 high-side logic input, active high, turns the high-side MOSFET on (HO2 high) when set to 1 and off when set to 0, with an internal 250 kΩ pull-down. |
| 14 | SD2 | bidirectional | Active-low shutdown for channel 2 that forces LO2 and HO2 low regardless of HIN2 and LIN2; the datasheet lists this pin as I/O. |
| 15 | LIN2 | input | Channel 2 low-side logic input, active high, turns the low-side MOSFET on (LO2 high) when set to 1 and off when set to 0, with an internal 250 kΩ pull-down. |
| 16 | CINN2 | input | Negative input of comparator 2 (over-current detection). |
| 17 | CINP2 | input | Positive input of comparator 2 (over-current detection); comparator input range is 0.1 V to VCC. |
| 18 | GND | power_in | Low-side ground reference for the chip; the datasheet requires it to be common with the MCU ground. |
| 19 | LO2 | output | Channel 2 low-side gate driver output for the low-side power MOSFET, rated for 0.8 A source and 1.3 A sink peak (pulse width ≤10 µs). |
| 20 | NC | unconnected | No connection; leave floating. |
| 21 | NC | unconnected | No connection; leave floating. |
| 22 | VS1 | power_in | Floating high-side ground reference for channel 1 (high-side source node). |
| 23 | HO1 | output | Channel 1 high-side gate driver output for the high-side power MOSFET, rated for 0.8 A source and 1.3 A sink peak (pulse width ≤10 µs). |
| 24 | VB1 | power_in | Floating high-side bootstrap supply for channel 1, referenced to VS1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SSOP-24 |
| Category | Motor Driver ICs |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply VB (absolute maximum) | VB | -0.3 | 600 | V | 8 | ||
| Supply voltage VCC (absolute maximum) | VCC | -0.3 | 25 | V | 9 | ||
| Ambient operating temperature (absolute maximum) | TA | -45 | 125 | ℃ | 9 | ||
| Storage temperature (absolute maximum) | Tstr | -55 | 150 | ℃ | 9 | ||
| Soldering temperature (absolute maximum) | TL | 300 | ℃ | T=10S | 9 | ||
| Supply voltage VCC (recommended operating) | VCC | 10 | 20 | V | Recommended Vcc operating voltage (typical 10V-20V) | 10 | |
| Supply voltage VCC | Vcc | 10 | 15 | 20 | V | 9 | |
| Quiescent current | Icc | 50 | 250 | 500 | uA | Inputs floating, CIN=1, CIP=0 | 9 |
| Logic input high voltage | INH | 2.5 | V | All input control signals | 9 | ||
| Logic input low voltage | INL | -0.3 | 0 | 1 | V | All input control signals | 9 |
| VCC turn-on threshold voltage | Vcc(on) | 7.4 | 8.4 | 9.4 | V | 9 | |
| VCC turn-off threshold voltage | Vcc(off) | 6.9 | 7.9 | 8.9 | V | 9 | |
| VB turn-on threshold voltage | VB(on) | 6.8 | 7.8 | 8.8 | V | 9 | |
| VB turn-off threshold voltage | VB(off) | 6.3 | 7.3 | 8.3 | V | 9 | |
| LO turn-on delay | Ton | 220 | 320 | nS | 见图 7-1 | 9 | |
| LO turn-off delay | Toff | 200 | 300 | nS | 见图 7-1 | 9 | |
| LO rise time | Tr | 350 | 450 | nS | 见图 7-1 | 9 | |
| LO fall time | Tf | 140 | 240 | nS | 见图 7-1 | 9 | |
| HO turn-on delay | Ton | 220 | 320 | nS | 见图 7-2 | 10 | |
| HO turn-off delay | Toff | 200 | 300 | nS | 见图 7-2 | 10 | |
| HO rise time | Tr | 350 | 450 | nS | 见图 7-2 | 10 | |
| HO fall time | Tf | 140 | 240 | nS | 见图 7-2 | 10 | |
| Comparator input offset voltage | VCOS | 10 | mV | 10 | |||
| Comparator input voltage range | VCICR | 0.1 | V | 10 | |||
| IO output source current (peak) | IO+ | 0.4 | 0.8 | A | Vo=0V, VIN=VIH, PW≤10uS | 10 | |
| IO output sink current (peak) | IO- | 0.8 | 1.3 | A | Vo=12V, VIN=VIL, PW≤10uS | 10 |
CAD (KiCad official)
- Symbol:
EG2125 - Footprint:
Package_SO:SSOP-24_5.3x8.2mm_P0.65mm - 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files:
eg2125-etched.step/eg2125-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg2125.step/eg2125.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (13 pp, sha256
13f3383604376409, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).