component
EG2104D
Public Made by Adomby adom
EG Micro Gate Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
EG2104D
EG Micro · Gate Drivers · SOP-8
EG2104D from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip supply input, specified at 9V to 25V; a high-frequency 0.1uF bypass capacitor is recommended to reduce high-frequency noise at the supply pin. |
| 2 | IN | input | Logic input controlling the high-side and low-side MOSFET outputs: IN=1 drives HO high and LO low, IN=0 drives LO high and HO low; logic high threshold is 2.5V minimum and low threshold is 1.0V maximum, with an internal 200K pull-down. |
| 3 | SD | input | Active-low shutdown logic input: when SD is 0 both LO and HO are forced low, and when SD is 1 the outputs follow IN; an internal 200K pull-down is included. |
| 4 | GND | power_in | Chip ground reference terminal. |
| 5 | LO | output | Output driving the low-side N-channel MOSFET gate, rated at 0.3A source and 0.6A sink current. |
| 6 | VS | power_in | High-side floating ground reference that connects to the high-side MOSFET source; the datasheet lists the VS voltage range as VB-25V to VB+0.3V. |
| 7 | HO | output | Output driving the high-side N-channel MOSFET gate, referenced to VS, rated at 0.3A source and 0.6A sink current. |
| 8 | VB | power_in | High-side floating supply for the bootstrap circuit; the VB undervoltage lockout turns on at 7.0V typical and turns off at 6.5V typical, with absolute maximum rating of 600V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage (VB) | VB | -0.3 | 600 | V | 7 | ||
| Low-side output LO | LO | -0.3 | V | 7 | |||
| Supply voltage (VCC) | VCC | -0.3 | 25 | V | 7 | ||
| Logic input voltage (IN) | IN | -0.3 | V | 7 | |||
| Enable logic input voltage (SD) | SD | -0.3 | V | 7 | |||
| Ambient temperature | TA | -40 | 125 | ℃ | 7 | ||
| Storage temperature | Tstr | -55 | 150 | ℃ | 7 | ||
| Soldering temperature | TL | 300 | ℃ | T=10S | 7 | ||
| Supply voltage (VCC) | Vcc | 9 | 15 | 25 | V | 8 | |
| Quiescent current | Icc | 180 | 300 | uA | 输入悬空，Vcc=15V | 8 | |
| Logic input high threshold voltage | Vin(H) | 2.5 | V | 所有输入控制信号 | 8 | ||
| Logic input low threshold voltage | Vin(L) | -0.3 | 0 | 1 | V | 所有输入控制信号 | 8 |
| Logic input high-level current | Iin(H) | 30 | uA | Vin=5V | 8 | ||
| Logic input low-level current | Iin(L) | -10 | uA | Vin=0V | 8 | ||
| VCC turn-on threshold voltage | Vcc(on) | 6.2 | 7.2 | 8.2 | V | 8 | |
| VCC turn-off threshold voltage | Vcc(off) | 5.7 | 6.7 | 7.7 | V | 8 | |
| VB turn-on threshold voltage | VB(on) | 6 | 7 | 8 | V | 8 | |
| VB turn-off threshold voltage | VB(off) | 5.7 | 6.5 | 7.5 | V | 8 | |
| LO turn-on delay | Ton | 750 | 850 | 950 | nS | 见图 7-1 | 8 |
| LO turn-off delay | Toff | 150 | 250 | 350 | nS | 见图 7-1 | 8 |
| LO rise time | Tr | 35 | 75 | 170 | nS | 见图 7-1 | 8 |
| LO fall time | Tf | 15 | 35 | 90 | nS | 见图 7-1 | 8 |
| HO turn-on delay | Ton | 750 | 850 | 950 | nS | 见图 7-2 | 8 |
| HO turn-off delay | Toff | 150 | 250 | 350 | nS | 见图 7-2 | 8 |
| HO rise time | Tr | 35 | 75 | 170 | nS | 见图 7-2 | 8 |
| HO fall time | Tf | 15 | 35 | 90 | nS | 见图 7-2 | 8 |
| Dead time | DT | 500 | 600 | 800 | nS | 见图 7-3，无负载电容 CL=0 | 8 |
| IO source (pull-up) current | IO+ | 0.3 | A | Vo=0V,VIN=VIH PW≤10uS | 8 | ||
| IO sink (pull-down) current | IO- | 0.6 | A | Vo=12V,VIN=VIL PW≤10uS | 9 |
CAD (KiCad official)
- Symbol:
EG2104D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
eg2104d-etched.step/eg2104d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg2104d.step/eg2104d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (12 pp, sha256
6687cdc0d7717701, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# EG2104D
**EG Micro** · Gate Drivers · SOP-8
EG2104D from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip supply input, specified at 9V to 25V; a high-frequency 0.1uF bypass capacitor is recommended to reduce high-frequency noise at the supply pin. |
| 2 | IN | input | Logic input controlling the high-side and low-side MOSFET outputs: IN=1 drives HO high and LO low, IN=0 drives LO high and HO low; logic high threshold is 2.5V minimum and low threshold is 1.0V maximum, with an internal 200K pull-down. |
| 3 | SD | input | Active-low shutdown logic input: when SD is 0 both LO and HO are forced low, and when SD is 1 the outputs follow IN; an internal 200K pull-down is included. |
| 4 | GND | power_in | Chip ground reference terminal. |
| 5 | LO | output | Output driving the low-side N-channel MOSFET gate, rated at 0.3A source and 0.6A sink current. |
| 6 | VS | power_in | High-side floating ground reference that connects to the high-side MOSFET source; the datasheet lists the VS voltage range as VB-25V to VB+0.3V. |
| 7 | HO | output | Output driving the high-side N-channel MOSFET gate, referenced to VS, rated at 0.3A source and 0.6A sink current. |
| 8 | VB | power_in | High-side floating supply for the bootstrap circuit; the VB undervoltage lockout turns on at 7.0V typical and turns off at 6.5V typical, with absolute maximum rating of 600V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage (VB) | VB | -0.3 | | 600 | V | | 7 |
| Low-side output LO | LO | -0.3 | | | V | | 7 |
| Supply voltage (VCC) | VCC | -0.3 | | 25 | V | | 7 |
| Logic input voltage (IN) | IN | -0.3 | | | V | | 7 |
| Enable logic input voltage (SD) | SD | -0.3 | | | V | | 7 |
| Ambient temperature | TA | -40 | | 125 | ℃ | | 7 |
| Storage temperature | Tstr | -55 | | 150 | ℃ | | 7 |
| Soldering temperature | TL | | | 300 | ℃ | T=10S | 7 |
| Supply voltage (VCC) | Vcc | 9 | 15 | 25 | V | | 8 |
| Quiescent current | Icc | | 180 | 300 | uA | 输入悬空，Vcc=15V | 8 |
| Logic input high threshold voltage | Vin(H) | 2.5 | | | V | 所有输入控制信号 | 8 |
| Logic input low threshold voltage | Vin(L) | -0.3 | 0 | 1 | V | 所有输入控制信号 | 8 |
| Logic input high-level current | Iin(H) | | | 30 | uA | Vin=5V | 8 |
| Logic input low-level current | Iin(L) | -10 | | | uA | Vin=0V | 8 |
| VCC turn-on threshold voltage | Vcc(on) | 6.2 | 7.2 | 8.2 | V | | 8 |
| VCC turn-off threshold voltage | Vcc(off) | 5.7 | 6.7 | 7.7 | V | | 8 |
| VB turn-on threshold voltage | VB(on) | 6 | 7 | 8 | V | | 8 |
| VB turn-off threshold voltage | VB(off) | 5.7 | 6.5 | 7.5 | V | | 8 |
| LO turn-on delay | Ton | 750 | 850 | 950 | nS | 见图 7-1 | 8 |
| LO turn-off delay | Toff | 150 | 250 | 350 | nS | 见图 7-1 | 8 |
| LO rise time | Tr | 35 | 75 | 170 | nS | 见图 7-1 | 8 |
| LO fall time | Tf | 15 | 35 | 90 | nS | 见图 7-1 | 8 |
| HO turn-on delay | Ton | 750 | 850 | 950 | nS | 见图 7-2 | 8 |
| HO turn-off delay | Toff | 150 | 250 | 350 | nS | 见图 7-2 | 8 |
| HO rise time | Tr | 35 | 75 | 170 | nS | 见图 7-2 | 8 |
| HO fall time | Tf | 15 | 35 | 90 | nS | 见图 7-2 | 8 |
| Dead time | DT | 500 | 600 | 800 | nS | 见图 7-3，无负载电容 CL=0 | 8 |
| IO source (pull-up) current | IO+ | | 0.3 | | A | Vo=0V,VIN=VIH PW≤10uS | 8 |
| IO sink (pull-down) current | IO- | | 0.6 | | A | Vo=12V,VIN=VIL PW≤10uS | 9 |
## CAD (KiCad official)
- Symbol: `EG2104D`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `eg2104d-etched.step` / `eg2104d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `eg2104d.step` / `eg2104d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [EG Micro datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8597552925656682496) (12 pp, sha256 `6687cdc0d7717701`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/eg2104d-datasheet.pdf)