main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs eg1253: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers eg1253: viewers · Ray
eg1253-etched.fit.json eg1253: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg1253-etched.glb eg1253: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg1253-etched.step eg1253: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg1253.glb Publish 0.1.0 · Ray
eg1253.kicad_mod Publish 0.1.0 · Ray
eg1253.kicad_sym Publish 0.1.0 · Ray
eg1253.lbr Publish 0.1.0 · Ray
eg1253.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json eg1253: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md eg1253: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

EG1253

EG Micro · AC-DC Controllers and Regulators · SOP-8

EG1253 from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin. PWM duty cycle is determined by the voltage on this pin combined with the current-sense signal. FB open-circuit voltage ~5.3 V; burst-mode threshold ~1.5 V; overload threshold Vth_OLP ~4.6 V.
2 NC unconnected No connection (悬空). Leave floating.
3 CS input Current-sense input. Senses voltage across the CS resistor to implement cycle-by-cycle over-current protection. Current-limit threshold Vcs(max) ≈ 0.9 V; internal 250 ns leading-edge blanking; OCP delay ~120 ns.
4 RI passive Oscillator frequency-setting pin. An external resistor to GND sets the PWM switching frequency by Fosc(kHz) = 3640 / RI(kΩ). Typical Fosc = 65 kHz with RI = 56 kΩ; RI open-pin voltage ~2 V.
5 GND power_in Chip ground reference for all internal circuitry and the gate driver return.
6 OUT output Gate-drive output for the external power MOSFET. Voh ≥ 11 V at Isource = 20 mA; Vol ≤ 0.3 V at Isink = -20 mA; typical rise/fall 130 ns / 50 ns into 1 nF. Maximum duty cycle Dmax ≈ 46% (50% max).
7 VCC power_in Chip supply. UVLO turn-on ~16 V, turn-off ~10.5 V; VOP over-voltage protection ~28.2 V (on) / 27 V (off); internal Zener clamp ~32 V at 10 mA. Startup current ~6 µA, operating current ~2.3 mA.
8 RT input Over-temperature protection pin. An external NTC thermistor to GND sets the OTP trip point. Internal 80 µA current source biases the pin; OTP triggers when V(RT) falls to ~1.0 V and clears when V(RT) rises above ~1.1 V.

Key specifications

Parameter Value
Manufacturer EG Micro
Package SOP-8
Category PMIC
Pins 8

CAD (KiCad official)

  • Symbol: EG1253
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: eg1253-etched.step / eg1253-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eg1253.step / eg1253.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
eg1253.step 122 KB You want the bare part, or you mark your own boards.
eg1253-etched.step 1.5 MB You want the part with EG1253 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 383 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: EG Micro datasheet (11 pp, sha256 4e175864533cd6be, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF