component
EG12521
Public Made by Adomby adom
EG Micro Motor Driver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
EG12521
EG Micro · Motor Driver ICs · SOP-8
EG12521 from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip supply input, operating range 4V to 20V; a 0.1-1uF high-frequency bypass capacitor is recommended to reduce high-frequency noise at the input. |
| 2 | HIN | input | High-side logic input, active high: 1 turns on the high-side power MOSFET (HO) and 0 turns it off; the datasheet gives V_IH ≥ 2.5V and V_IL ≤ 1.0V. |
| 3 | LIN | input | Low-side logic input, active high: 1 turns on the low-side power MOSFET (LO) and 0 turns it off; the datasheet gives V_IH ≥ 2.5V and V_IL ≤ 1.0V. |
| 4 | GND | power_in | Chip ground terminal. |
| 5 | LO | output | Low-side gate drive output that controls the on/off state of the low-side power MOSFET. |
| 6 | VS | power_in | High-side floating ground (high-side return), the reference node for the HO driver. |
| 7 | HO | output | High-side gate drive output that controls the on/off state of the high-side power MOSFET; output sources up to 0.8A and sinks up to 1.2A (pulse width ≤10µs). |
| 8 | VB | power_in | High-side floating supply, charged through the external bootstrap diode and capacitor; the datasheet rates VB from -0.3V to 600V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage (VB) | VB | -0.3 | 600 | V | 7 | ||
| Supply voltage (VCC) | VCC | -0.3 | 25 | V | 7 | ||
| Ambient temperature (TA) | TA | -45 | 125 | ℃ | 7 | ||
| Storage temperature (Tstr) | Tstr | -65 | 150 | ℃ | 7 | ||
| Soldering temperature (TL) | TL | 300 | ℃ | T=10S | 7 | ||
| Supply voltage (Vcc) | Vcc | 4 | 15 | 20 | V | 8 | |
| Input logic high level (Vin(H)) | Vin(H) | 2.5 | V | All input control signals | 8 | ||
| Input logic low level (Vin(L)) | Vin(L) | -0.3 | 0 | 1 | V | All input control signals | 8 |
| Quiescent current (Icc) | Icc | 0 | 1 | uA | Input floating, Vcc=15V | 8 | |
| High-side quiescent current (Ibs) | Ibs | 0 | 1 | uA | Input floating, VBS=15V | 8 | |
| Delay matching (MT) | MT | 5 | 50 | nS | HO, LO turn-on/turn-off time difference | 8 | |
| LO turn-on delay (Ton) | Ton | 100 | 150 | nS | See Figure 7-1 | 8 | |
| LO turn-off delay (Toff) | Toff | 70 | 100 | nS | See Figure 7-1 | 8 | |
| LO rise time (Tr) | Tr | 30 | 70 | nS | See Figure 7-1 | 8 | |
| LO fall time (Tf) | Tf | 20 | 50 | nS | See Figure 7-1 | 8 | |
| HO turn-on delay (Ton) | Ton | 100 | 150 | nS | See Figure 7-2 | 8 | |
| HO turn-off delay (Toff) | Toff | 70 | 100 | nS | See Figure 7-2 | 8 | |
| HO rise time (Tr) | Tr | 30 | 70 | nS | See Figure 7-2 | 8 | |
| HO fall time (Tf) | Tf | 20 | 50 | nS | See Figure 7-2 | 8 | |
| Output source current (IO+) | IO+ | 0.8 | A | Vo=0V, PW≤10uS | 8 | ||
| Output sink current (IO-) | IO- | 1.2 | A | Vo=15V, PW≤10uS | 8 |
CAD (KiCad official)
- Symbol:
EG12521 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
eg12521-etched.step/eg12521-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg12521.step/eg12521.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (12 pp, sha256
dbdb33e77c51d956, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# EG12521
**EG Micro** · Motor Driver ICs · SOP-8
EG12521 from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Chip supply input, operating range 4V to 20V; a 0.1-1uF high-frequency bypass capacitor is recommended to reduce high-frequency noise at the input. |
| 2 | HIN | input | High-side logic input, active high: 1 turns on the high-side power MOSFET (HO) and 0 turns it off; the datasheet gives V_IH ≥ 2.5V and V_IL ≤ 1.0V. |
| 3 | LIN | input | Low-side logic input, active high: 1 turns on the low-side power MOSFET (LO) and 0 turns it off; the datasheet gives V_IH ≥ 2.5V and V_IL ≤ 1.0V. |
| 4 | GND | power_in | Chip ground terminal. |
| 5 | LO | output | Low-side gate drive output that controls the on/off state of the low-side power MOSFET. |
| 6 | VS | power_in | High-side floating ground (high-side return), the reference node for the HO driver. |
| 7 | HO | output | High-side gate drive output that controls the on/off state of the high-side power MOSFET; output sources up to 0.8A and sinks up to 1.2A (pulse width ≤10µs). |
| 8 | VB | power_in | High-side floating supply, charged through the external bootstrap diode and capacitor; the datasheet rates VB from -0.3V to 600V absolute maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | Power Management ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage (VB) | VB | -0.3 | | 600 | V | | 7 |
| Supply voltage (VCC) | VCC | -0.3 | | 25 | V | | 7 |
| Ambient temperature (TA) | TA | -45 | | 125 | ℃ | | 7 |
| Storage temperature (Tstr) | Tstr | -65 | | 150 | ℃ | | 7 |
| Soldering temperature (TL) | TL | | | 300 | ℃ | T=10S | 7 |
| Supply voltage (Vcc) | Vcc | 4 | 15 | 20 | V | | 8 |
| Input logic high level (Vin(H)) | Vin(H) | 2.5 | | | V | All input control signals | 8 |
| Input logic low level (Vin(L)) | Vin(L) | -0.3 | 0 | 1 | V | All input control signals | 8 |
| Quiescent current (Icc) | Icc | | 0 | 1 | uA | Input floating, Vcc=15V | 8 |
| High-side quiescent current (Ibs) | Ibs | | 0 | 1 | uA | Input floating, VBS=15V | 8 |
| Delay matching (MT) | MT | | 5 | 50 | nS | HO, LO turn-on/turn-off time difference | 8 |
| LO turn-on delay (Ton) | Ton | | 100 | 150 | nS | See Figure 7-1 | 8 |
| LO turn-off delay (Toff) | Toff | | 70 | 100 | nS | See Figure 7-1 | 8 |
| LO rise time (Tr) | Tr | | 30 | 70 | nS | See Figure 7-1 | 8 |
| LO fall time (Tf) | Tf | | 20 | 50 | nS | See Figure 7-1 | 8 |
| HO turn-on delay (Ton) | Ton | | 100 | 150 | nS | See Figure 7-2 | 8 |
| HO turn-off delay (Toff) | Toff | | 70 | 100 | nS | See Figure 7-2 | 8 |
| HO rise time (Tr) | Tr | | 30 | 70 | nS | See Figure 7-2 | 8 |
| HO fall time (Tf) | Tf | | 20 | 50 | nS | See Figure 7-2 | 8 |
| Output source current (IO+) | IO+ | | 0.8 | | A | Vo=0V, PW≤10uS | 8 |
| Output sink current (IO-) | IO- | | 1.2 | | A | Vo=15V, PW≤10uS | 8 |
## CAD (KiCad official)
- Symbol: `EG12521`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `eg12521-etched.step` / `eg12521-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `eg12521.step` / `eg12521.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [EG Micro datasheet](docs/eg12521-datasheet.pdf) (12 pp, sha256 `dbdb33e77c51d956`, retrieved 2026-10-22, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/eg12521-datasheet.pdf)