main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs eg1198: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers eg1198: viewers · Ray
eg1198-etched.fit.json eg1198: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg1198-etched.glb eg1198: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg1198-etched.step eg1198: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eg1198.glb Publish 0.1.0 · Ray
eg1198.kicad_mod Publish 0.1.0 · Ray
eg1198.kicad_sym Publish 0.1.0 · Ray
eg1198.lbr Publish 0.1.0 · Ray
eg1198.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json eg1198: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md eg1198: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

EG1198

EG Micro · DC-DC Converters · ESOP-8

EG1198 from EG Micro, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Chip power supply input. Absolute maximum 120 V; recommended operating range 10 V to 120 V. Bypass with a low-ESR input capacitor close to the pin.
2 GND power_in Device ground reference.
3 EN input Enable input, active high. EN_on ≥ 2.8 V (max 7 V) turns the converter on; EN_off ≤ 1 V places the part in standby (Isd ≤ 200 µA).
4 FB input Output voltage feedback input to the internal error amplifier. Regulated to VREF = 1.25 V (1.21 V to 1.29 V). Vout = (1 + R1/R2) × 1.25 V. Input bias current ≤ 1 µA.
5 VD passive External bootstrap diode connection. Used together with VB to generate the floating high-side gate drive supply.
6 VB passive Floating bootstrap supply for the high-side MOSFET driver. Rated VS-0.3 V to VS+7 V; connect a bootstrap capacitor between VB and VS.
7 VS output Floating ground / switch node. Connects to the source of the internal high-side power MOSFET and drives the external inductor and freewheeling diode. Rated -0.3 V to 125 V.
8 IS input MOSFET peak current-limit sense input. Trips at a current-sense voltage of approximately 0.18 V (I_peak ≈ 0.18 / R1) for cycle-by-cycle current limiting. Rated VS-0.3 V to VS+6 V.
9 EP/VIN power_in Exposed thermal pad on the backside of the ESOP-8 package, internally tied to VIN. Solder to a large copper pour connected to VIN for improved thermal dissipation and higher output current capability.

Key specifications

Parameter Value
Manufacturer EG Micro
Package ESOP-8
Category PMIC
Pins 9

CAD (KiCad official)

  • Symbol: EG1198
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: eg1198-etched.step / eg1198-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eg1198.step / eg1198.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
eg1198.step 125 KB You want the bare part, or you mark your own boards.
eg1198-etched.step 1.5 MB You want the part with EG1198 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 383 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: EG Micro datasheet (10 pp, sha256 5486b7021c845a8e, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF