component

EG1166

Public Made by Adom

by adom

EG Micro AC-DC Controllers And Regulators, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)eg1166factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 7d ago
viewers eg1166: viewers · Ray 7d ago
eg1166-etched.glb Publish 0.1.0 · Ray 7d ago
eg1166-etched.step eg1166: factory component page (tier=lcsc) · Ray 7d ago
eg1166-hero.glb eg1166: hero GLB from the etched model (keeps the MPN mark) · Ray 7d ago
eg1166-hero.overlay.json Publish 0.1.0 · Ray 7d ago
eg1166.glb Publish 0.1.0 · Ray 7d ago
eg1166.kicad_mod Publish 0.1.0 · Ray 7d ago
eg1166.kicad_sym Publish 0.1.0 · Ray 7d ago
eg1166.lbr Publish 0.1.0 · Ray 7d ago
eg1166.step Publish 0.1.0 · Ray 7d ago
package.json Publish 0.1.0 · Ray 7d ago
page.json Set visibility: public · Ray 7d ago
README.md Publish 0.1.0 · Ray 7d ago

EG1166

EG Micro · AC-DC Controllers And Regulators · SOP-16

EG1166 from EG Micro, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF5V output Provides the 5V reference output, which can supply up to 10mA and should be bypassed with a close 1uF ceramic capacitor.
2 EN input Enable input with a 1.2V comparison threshold; when the pin is below 1.2V the chip enters standby and the 5V output is turned off.
3 SS input Soft-start pin where an external capacitor sets the voltage rise rate and therefore the soft-start time.
4 VSS power_in Analog signal ground (AGND) for the chip's control circuitry.
5 CP input Oscillator timing pin where an external capacitor Cp sets the switching frequency according to f = 6.6×10^6 / Cp (Cp in pF), giving about 66kHz at 100pF.
6 ERRO output Output of the voltage-loop error amplifier.
7 FB input Negative input of the voltage-loop error amplifier, regulated to a 1.2V reference (1.188V to 1.212V).
8 PPWM output Early (advanced) PWM output that leads the HO drive by about 400ns.
9 PPWMN output Inverted early PWM output that leads the HO drive by about 400ns.
10 IS input Current comparator input, where the peak current limit is set by IPK = 180mV / Rsen referenced to COM.
11 LO output Drives the low-side power MOSFET on and off, with a 600V-rated half-bridge driver stage on the chip.
12 COM power_in Power ground (PGND) for the gate-drive and output stage.
13 VCC power_in Chip supply input with an operating range of 9V to 20V, with UVLO turn-on at about 16V and turn-off at about 8V to 9V.
14 VS power_in High-side floating ground reference for the high-side driver.
15 VB power_in High-side floating supply for the high-side driver, rated up to 600V relative to VS.
16 HO output Drives the high-side power MOSFET on and off.

Key specifications

Parameter Value
Manufacturer EG Micro
Package SOP-16
Category Power Management (PMIC)
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
高端输出 (min VS-0.3 / max VB+0.3) HO -0.3 0.3 V 8
自举高端 VB 电源 VB -0.3 600 V 8
高端悬浮地端 (min VB-20 / max VB+0.3) VS -20 0.3 V 8
低端电源 VCC -0.3 20 V 8
低端输出 (max VCC+0.3) LO、PPWM、PPWMN -0.3 0.3 V 8
低端比较器输入 IS -0.3 5 V 8
低压端口 FB、ERRO、CP、SS、REF5V -0.3 5.5 V 8
控制端口 EN -0.3 20 V 8
环境温度 TA -45 125 ℃ 8
储存温度 Tstr -65 150 ℃ 8
焊接温度 TL 300 ℃ T=10S 8
高压电源 VB 输入电压 VB 9 600 V 8
低压电源 VCC 输入电压 VCC 9 20 V 8
VCC 开启电压 VCC（ON） 15 16 17 V 8
VCC 关闭电压 VCC（OFF） 8 9 10 V 8
5V 基准输出 REF5V 4.8 4.9 5 V VCC 开启，VCC=12V 8
线性调整率 ΔVREF 3 50 mV VCC=10V to 20V 8
负载调整率 ΔVREF 5 50 mV IL=0 to 10mA 8
最大输出电流 Io 10 mA 9
振荡频率范围 Fosc 60 66 72 KHz CT=100pF 9
电压抑制比 (printed ±3 typ, ±5 max) Δf/ΔVCC -5 3 5 % CT=100pF 9
温度漂移 (printed ±5 typ, ±8 max) Δf/ΔT -8 5 8 % 9
误差放大器反馈端 FB 1.188 1.2 1.212 V 9
误差放大器输出电流能力 Ierro 15 20 25 uA 9
输入偏置电流 Ib 0.1 uA 9
开环增益 AVOL 60 75 dB 9
最大输出占空比 D(max) 48 50 % CT=100pF 9
EN 使能端比较电压 EN 1.15 1.2 1.25 V 9
HO、LO 开启关闭时间差值 MT 50 nS 9
LO、HO 输出拉电流 IO+ 1.5 2 A Vo=0V,PW≤10uS 9
LO、HO 输出灌电流 IO- 2 2.5 A Vo=12V,PW≤10uS 9
VCC 启动电流 Istart 200 300 uA 8
PPWM 提前时间 PPWM 400 nS 9
电流比较器相对 COM 电压 IS 180 mV 9
前沿消隐 LEB 300 nS 9
PPWM、PPWMN 输出拉电流 I0+PPWM 0.1 A Vo=0V,PW≤10uS 9
PPWM、PPWMN 输出灌电流 I0-PPWM 0.1 A Vo=12V, PW≤10uS 9

CAD (KiCad official)

  • Symbol: EG1166
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: eg1166-etched.step / eg1166-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eg1166.step / eg1166.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: EG Micro datasheet (12 pp, sha256 b653e8a6cf855d43, retrieved 2026-10-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF