component
EG1163
Public Made by Adomby adom
EG Micro AC-DC Controllers & Regulators, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEG1163
EG Micro · AC-DC Controllers & Regulators · SOP-16
EG1163 from EG Micro, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF5V | power_out | 5V reference output with 50mA drive current. |
| 2 | EN | input | Chip enable with 1.2V comparison threshold; below 1.2V the chip enters standby and the 5V output is turned off. |
| 3 | SD | input | High level shuts off the PWM output, low level allows PWM output. |
| 4 | SS | passive | Soft-start pin with external capacitor; capacitor voltage rise rate sets the soft-start time. |
| 5 | VSS | power_in | Chip signal ground (AGND). |
| 6 | CP | passive | External capacitor sets oscillator frequency, f=(14.4x10^6)/Cp with Cp in pF. |
| 7 | ERRO | output | Voltage loop error amplifier output. |
| 8 | FB | input | Voltage loop error amplifier inverting input, 1.2V reference. |
| 9 | SDLIN | input | Low-side MOSFET current comparator input, 180mV threshold relative to COM. |
| 10 | LO | output | Output driving the low-side power MOSFET on and off. |
| 11 | COM | power_in | Chip power ground (PGND). |
| 12 | VCC | power_in | Chip supply, voltage range 10V-20V. |
| 13 | SDHIN | input | High-side MOSFET current comparator input, 180mV threshold relative to VS. |
| 14 | VS | power_in | High-side floating ground. |
| 15 | VB | power_in | High-side floating supply, up to 600V. |
| 16 | HO | output | Output driving the high-side power MOSFET on and off. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-16 |
| Category | Power Management ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VB bootstrap high-side supply (abs max) | VB | -0.3 | 600 | V | TA=25℃ | 9 | |
| Low-side supply (abs max) | VCC | -0.3 | 20 | V | TA=25℃ | 9 | |
| SDLIN comparator input (abs max) | SDLIN | -0.3 | 5 | V | TA=25℃ | 9 | |
| Low-voltage ports FB, ERRO, CP, SS, REF5V (abs max) | -0.3 | 5.5 | V | TA=25℃ | 9 | ||
| Control ports SD, EN (abs max) | -0.3 | 20 | V | TA=25℃ | 9 | ||
| Ambient temperature | TA | -45 | 125 | ℃ | 9 | ||
| Storage temperature | Tstr | -65 | 150 | ℃ | 9 | ||
| Soldering temperature | TL | 300 | ℃ | T=10S | 9 | ||
| VB high-voltage supply input voltage | VB | 10 | 600 | V | 9 | ||
| VCC low-voltage supply input voltage | VCC | 10 | 20 | V | 9 | ||
| VCC start-up current | Istart | 200 | 300 | uA | 9 | ||
| VCC turn-on voltage | VCC(ON) | 14 | 15 | 17 | V | EG1163 | 9 |
| VCC turn-off voltage | VCC(OFF) | 8 | 9 | 10 | V | EG1163 | 9 |
| REF5V reference output | REF5V | 4.8 | 4.9 | 5 | V | VCC on, VCC=12V | 10 |
| Line regulation | ΔVREF | 3 | 50 | mV | VCC=10V to 20V | 10 | |
| Load regulation | ΔVREF | 5 | 50 | mV | IL=0 to 10mA | 10 | |
| Maximum output current | Io | 50 | mA | 10 | |||
| Oscillation frequency range | Fosc | 65 | 72 | 80 | KHz | CT=200pF | 10 |
| Error amplifier feedback voltage | FB | 1.188 | 1.2 | 1.212 | V | 10 | |
| Error amplifier output current capability | Ierro | 15 | 20 | 25 | uA | 10 | |
| Input bias current | Ib | 0.1 | uA | 10 | |||
| Open-loop gain | AVOL | 60 | 75 | dB | 10 | ||
| EN enable comparator voltage | EN | 1.15 | 1.2 | 1.25 | V | 10 | |
| Cycle-by-cycle PWM shutdown voltage | SD | 3 | V | 10 | |||
| Dead time | DT | 150 | 200 | 250 | nS | 10 | |
| LO, HO output source current | IO+ | 0.8 | 1.2 | A | Vo=0V, VIN=VIH, PW≤10uS | 10 | |
| LO, HO output sink current | IO- | 1.5 | 2 | A | Vo=12V, VIN=VIL, PW≤10uS | 10 |
CAD (KiCad official)
- Symbol:
EG1163 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
eg1163-etched.step/eg1163-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg1163.step/eg1163.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (13 pp, sha256
fc0d80ec9056a6fa, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).