← Commit history

Initial commit: component/eg1162

Ray ·43e9150c16 ·
2 files changed +86
README.mdadded+52
@@ -0,0 +1,52 @@+# EG1162++**EG Micro** · DC-DC Converters · SOP-16++EG1162 from EG Micro, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | REF3.3V | power_out | 3.3V internal reference output, maximum output current 50mA. Bypass with a small (e.g. 1uF) ceramic capacitor placed close to the pin. |+| 2 | EN | input | Chip enable pin. Comparator threshold 1.2V (typ). When EN < 1.2V, the chip enters standby and the 3.3V reference output is disabled. External resistor divider (R20/R21) sets the start/stop voltages. |+| 3 | SD | input | Shutdown input. Logic HIGH disables the PWM output; logic LOW enables PWM output. Threshold approximately 3V. |+| 4 | SS | input | Soft-start pin. Connect an external capacitor to GND; the capacitor's ramp rate determines the soft-start time. |+| 5 | VSS | power_in | Analog signal ground (AGND) for the chip. |+| 6 | CP | input | Oscillator timing capacitor pin. External capacitor Cp sets the PWM switching frequency: f = (18 x 10^6) / Cp (Cp in pF). Example: Cp = 270pF → ~67 kHz. |+| 7 | ERRO | output | Voltage-loop error amplifier output. Used for external loop compensation. Output current capability typ 20uA (15-25uA). |+| 8 | FB | input | Voltage-loop error amplifier inverting (negative) input. Internal reference 1.2V (typ). Set output voltage via divider: Vout = (1 + R1/R2) x 1.2V. |+| 9 | SDLIN | input | Low-side MOSFET current-sense comparator input. Trip threshold 180mV relative to COM (PGND). Used for cycle-by-cycle low-side current limit. |+| 10 | LO | output | Low-side gate driver output. Controls the turn-on/turn-off of the low-side (synchronous rectifier) power MOSFET. Source/sink capability ~1.8A/2A peak. |+| 11 | COM | power_in | Power ground (PGND) return for the low-side driver. |+| 12 | VCC | power_in | Low-side chip supply. Operating range 4.5V-20V (absolute max 20V). UVLO thresholds: ON = 4.6V, OFF = 3.8V. Requires a ~10uF storage capacitor to GND. |+| 13 | SDHIN | input | High-side MOSFET current-sense comparator input. Trip threshold 180mV relative to VS. Used for cycle-by-cycle high-side (peak) current limit. |+| 14 | VS | output | High-side floating ground / switch node reference. Connects to the source of the high-side MOSFET and the bootstrap capacitor's low side. Absolute rating VB-20 to VB+0.3V. |+| 15 | VB | power_in | High-side floating (bootstrap) supply. Typical operating range 4V to 600V referenced to VS. Bootstrap capacitor connects between VB and VS. |+| 16 | HO | output | High-side floating gate driver output. Controls the turn-on/turn-off of the high-side power MOSFET, swinging between VS and VB. Source/sink capability ~1.8A/2A peak. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | EG Micro |+| Package | SOP-16 |+| Category | PMIC |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `EG1162`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [EG Micro datasheet](docs/eg1162-datasheet.pdf) (13 pp, sha256 `5379721bee5f9bbb`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/eg1162-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "eg1162",+  "version": "0.1.0",+  "type": "component",+  "description": "EG Micro DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "eg1162"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "eg1162.kicad_sym",+    "eg1162.kicad_mod",+    "eg1162.glb",+    "eg1162.step",+    "eg1162.lbr",+    "docs/hero.png",+    "docs/eg1162-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file