← Commit history

eg1162: factory component page (tier=lcsc)

Ray ·3c23c86f12 · ·parent fccbdc8
1 file changed +164−8
page.json+164−8
@@ -1,13 +1,174 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "eg1162",+  "title": "EG1162",+  "brief": "EG Micro DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "EG Micro DC-DC Converters, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "eg1162"   ],+  "component": {+    "mpn": "EG1162",+    "manufacturer": "EG Micro",+    "package": "SOP-16",+    "pin_count": 16,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121400_EG-Micro-EG1162_C2929082.pdf",+    "parts": {+      "symbol": "eg1162.kicad_sym",+      "footprint": "eg1162.kicad_mod",+      "model_3d": "eg1162.glb",+      "model_3d_step": "eg1162.step",+      "lbr": "eg1162.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "REF3.3V",+        "type": "power_out",+        "description": "3.3V internal reference output, maximum output current 50mA. Bypass with a small (e.g. 1uF) ceramic capacitor placed close to the pin."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Chip enable pin. Comparator threshold 1.2V (typ). When EN < 1.2V, the chip enters standby and the 3.3V reference output is disabled. External resistor divider (R20/R21) sets the start/stop voltages."+      },+      {+        "number": "3",+        "name": "SD",+        "type": "input",+        "description": "Shutdown input. Logic HIGH disables the PWM output; logic LOW enables PWM output. Threshold approximately 3V."+      },+      {+        "number": "4",+        "name": "SS",+        "type": "input",+        "description": "Soft-start pin. Connect an external capacitor to GND; the capacitor's ramp rate determines the soft-start time."+      },+      {+        "number": "5",+        "name": "VSS",+        "type": "power_in",+        "description": "Analog signal ground (AGND) for the chip."+      },+      {+        "number": "6",+        "name": "CP",+        "type": "input",+        "description": "Oscillator timing capacitor pin. External capacitor Cp sets the PWM switching frequency: f = (18 x 10^6) / Cp (Cp in pF). Example: Cp = 270pF \u2192 ~67 kHz."+      },+      {+        "number": "7",+        "name": "ERRO",+        "type": "output",+        "description": "Voltage-loop error amplifier output. Used for external loop compensation. Output current capability typ 20uA (15-25uA)."+      },+      {+        "number": "8",+        "name": "FB",+        "type": "input",+        "description": "Voltage-loop error amplifier inverting (negative) input. Internal reference 1.2V (typ). Set output voltage via divider: Vout = (1 + R1/R2) x 1.2V."+      },+      {+        "number": "9",+        "name": "SDLIN",+        "type": "input",+        "description": "Low-side MOSFET current-sense comparator input. Trip threshold 180mV relative to COM (PGND). Used for cycle-by-cycle low-side current limit."+      },+      {+        "number": "10",+        "name": "LO",+        "type": "output",+        "description": "Low-side gate driver output. Controls the turn-on/turn-off of the low-side (synchronous rectifier) power MOSFET. Source/sink capability ~1.8A/2A peak."+      },+      {+        "number": "11",+        "name": "COM",+        "type": "power_in",+        "description": "Power ground (PGND) return for the low-side driver."+      },+      {+        "number": "12",+        "name": "VCC",+        "type": "power_in",+        "description": "Low-side chip supply. Operating range 4.5V-20V (absolute max 20V). UVLO thresholds: ON = 4.6V, OFF = 3.8V. Requires a ~10uF storage capacitor to GND."+      },+      {+        "number": "13",+        "name": "SDHIN",+        "type": "input",+        "description": "High-side MOSFET current-sense comparator input. Trip threshold 180mV relative to VS. Used for cycle-by-cycle high-side (peak) current limit."+      },+      {+        "number": "14",+        "name": "VS",+        "type": "output",+        "description": "High-side floating ground / switch node reference. Connects to the source of the high-side MOSFET and the bootstrap capacitor's low side. Absolute rating VB-20 to VB+0.3V."+      },+      {+        "number": "15",+        "name": "VB",+        "type": "power_in",+        "description": "High-side floating (bootstrap) supply. Typical operating range 4V to 600V referenced to VS. Bootstrap capacitor connects between VB and VS."+      },+      {+        "number": "16",+        "name": "HO",+        "type": "output",+        "description": "High-side floating gate driver output. Controls the turn-on/turn-off of the high-side power MOSFET, swinging between VS and VB. Source/sink capability ~1.8A/2A peak."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121400_EG-Micro-EG1162_C2929082.pdf",+        "pages": 13,+        "sha256": "5379721bee5f9bbb",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "EG Micro",+      "Package": "SOP-16",+      "Category": "PMIC",+      "Pins": "16"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "eg1162"+  ],+  "discovery_pitch": "EG1162 (EG Micro) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +186,5 @@     "docs/eg1162-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file